I have my own website running on my Ubuntu 10.04 server using Apache2. I have a log in page that I would like to use ssl (https) on. I have set up quite a few websites using virtual hosts, but I have never messed with ssl. I know you have to generate a certificate using openssl (which i have installed). I have been trying to find some tutorials online, but everyone of them is different...and nothing seems current.
View 1 Replies
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies View RelatedI am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
Installation of SUSE 11 server now when I try to configure apache2 (opening port 80) I get a "cannot adjust apache2 service" error??? Can anyone shed some light on this.
View 1 Replies View RelatedI have ssh installed, using port 22. I installed apache2, and forwarded port 82 to 80. For some reason, the following message occurs when connecting to IP:
82: SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2
I can view my page file through things like http://localhost.
I think my apache2 is owned and running as root. I don't know if I installed it like a noob a while ago but I would like to secure it now especially since I just figured out how setup virtual hosts and I may want to eventually let people host sites on my server and I obviously don't want to have to give them root access. How can I confirm that apache2 is running as root and how do I take it away from the root user?
View 6 Replies View RelatedI looked around on the internet to find a solution, but none found.I installed apache2 on Karmic Koala and that one works. On the default page I created a link to "/home/me/Documents/folder/index.html", but when I click the link it gives me the URL not found-error.
View 2 Replies View RelatedSometime ago I got Apache2 working. I also did my best to enable it for SSL, but failed. I'd like to give that another go. I have OpenSSL installed and all (or so Karmic reports). But port 443 gives an error when I try to connect.
View 1 Replies View RelatedI'm running 10.04 with Apache2/PHP5.x I wanted to test some basic cgi scripts, but my browser is displaying the code (#!...) If I run the scripts on the console, they work fine so CGI is not the problem, it's apache. To install the CGI module I ran sudo apt-get install libapache2-mod-perl2 with no problems. By the way, I installed Apache through apt-get instead of doing it manually, but it seems that the installation divides the conf file in different parts, so the regular apache2.conf has this:
Code:
# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf
# Include all the user configurations:
Include /etc/apache2/httpd.conf
# Include ports listing
Include /etc/apache2/ports.conf
[Code]....
I can't figure out what I need to do to get CGI working on my server.
I can't seem php5 work with apache2. I am getting the text openning instead of php. I think this is infamous problem, found many suggestions adding AddType application/x-httpd-php .php, did that in/etc/apache2/apache2. conf and /etc/apache2/httpd.confwith no luck, it's still opening text
View 6 Replies View RelatedI am using Ubuntu Server 10.04 64bit. I am getting an Apache2 start up error after I setup my certificates and configure Apache2 for HTTPS. At the point on start up where I need to type in my certificate pass code I get a lockup due to the Apache2 process being in a hung state. I reboot if needed and switch to console tty2. When I type in the command.
Code:
I get the following error.
Code:
To correct the problem I do this.
Code:
From the output of the command above I look for the apache2 process and make note of its process ID. Then, I kill that process ID. For example, the command below has an apache2 process ID of 1131.
Code:
Next, when I run this command.
Code:
The apache2 server starts up and asks for my certificate password, accepts it when I type it in, and runs perfectly fine afterward.
Fortunately this instance of Ubuntu Server is running inside a VMWare virtual machine. I can just "pause" the virtual machine if I need to rather than going through this crude and tedious start up process too frequently.
Crude and tedious are feelings I'm having too frequently lately with Ubuntu Server.
I've reinstalled my system and installed apache. I've installed php5. 'a2enmod php5' returns with a message telling me that php5 is already enabled.
However, this code does not parse:
Code:
</php
phpinfo() ;
/>
I get a blank page. When I view the source code for the page, I see the php code.
How do I get php to work?
I'm running a LAMP server on 10.10 server. I recently noticed that my router said it had 4,000 open connections, and saw they were all going to my server. When I look at /var/log/access.log, I see hundreds of thousands of lines like this:
[code]...
those connections are coming in once per second. how I can stop this? My family's network is being constantly overloaded.
I have configure https for my local intranet on ubuntu.
I have followed following documentation.
[URL]
I am using Self-Signed Certificate.
I have 10 folders inside http://"myipaddress" location.I want to activate/access https:// for specific folder (https://myipaddress/myfolder).
here https getting activated for whole apache2 server.How can i activate it for specific folder.
So I've got a box running 10.04LTS Server, and on it is running the latest build of Apache2.It's a home box - a server set up for the sole purpose of experimenting and having fun with. So far, the fun is mostly breaking it over SSH and then fixing it when I get home and can log into it via recovery.What I really want to do is to get this box set up with Apache2 the way it seems like it was designed - with Apache2 serving web pages from its default file location (/var/www) but also being able to log in and upload/download new web page files to that directory over SCP or SFTP. I keep hitting snags.Here's what I've done so far:
1. The server is set up in a DMZ at home and my router updates a Dynamic DNS record; so far I can SSH into it no problem.
2. Apache is working. I get my "it works!" page when I enter either the IP or the dyndns domain name.
3. SFTP is sort of working. I can log on using WinSCP and see the files and download them, but I can't upload to the default directory with my normal login.
Here's my issues: 1. I want to set up Apache *correctly*. To me, that means leaving it pointing to the default directory, but still being able to upload to that directory. I have not (and probably will not) enable the root account. I've set the permissions to 755. I've tried chown'ing the directory, but then it seems I can't view the webpages.As a workaround, I created a www folder in my default user home directory and pointed Apache2 there in the 'default' file in /etc/apache2/sites-available. The changes read as follows:
Code:
DocumentRoot /home/username/www
<Directory />
Options FollowSymLinks[code]...
That gives me a workaround for the default directory SFTP issue, but I would rather learn what I need to do to have it set up and working with default values.
2. You may notice I added Includes under the Options. My goal is to get server-side includes working. But they aren't. I have some existing webpages my work has set up - I using these as a template to use to adapt a flash movie I made to a specific resolution, as well as to learn how to optimize my flash for a webpage. Our webhost uses virtual hosting; I am not yet doing so. I'm not sure what they've done to set up the server-side includes, but the files they are using are all html files - no shtml. The include files themselves have either .htm or .html extensions. All of the pages have .html extensions.
My reading said that I need mod_include installed in Apache2. Where can I check to see that it is installed? Where do I need to add the Includes under Options?Is it in the right place? And finally, where do I need to add XBitHack on to enable it? This is the method that Apache suggests, but the documentation offers no clue as to where to put it. Most of the documentation out there refers to apache.conf, but that's the Apache 1.3 way of doing things.I really just want this to be set up according to the defaults as much as possible.I want to have a good working knowledge of Apache and of how to set it up and configure it, but dang it if it isn't a frustrating process.
I am trying to setup Ubuntu with Apache2+Tomcat6. I can get the site up and running, however when I have a jsp file it does not execute, instead it just prints the full jsp to browser.
I am checking if there is a configuration issue that may be missed.
sudo /etc/init.d/tomcat6 status # shows fine
/etc/apache2/sites-available has a file for my site containing valid DocumentRoot
/home/user/sitename/webapps/examples
/home/user/sitename/webapps/examples/jsp
/home/user/sitename/webapps/examples/jsp/sample.jsp contains below text
<%= "hello" %>
When above page is visited in browser, it shows full html tags instead of displaying the output. It displays static pages fine.
I'm very baffled by this, I was setting up my mumble server since my old one had a hard disk failure. I was messing around with web registration but decided I didn't want it since this server is really only for a few friends.
So I removed all the mumble-django and apache2 packages required for web registration, but for some reason apache2 is still on my system and listening for connections.
terminal output below to further clarify.
Code:
Linux voiceserv 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:29 UTC 2011 i686 GNU/Linux
Ubuntu 10.10
Welcome to Ubuntu!
[Code].....
I'm new to this forum and to linux and I love it however I'm having small trouble with setting up my Apache2 web server to host my website. the main problem I'm having right now is that when I browse to my website it keep going to the default Apache page and not my website pages.
here is my virtual host setup: these are two separate file in the sites-available folder
Code:
<VirtualHost *:80>
ServerAdmin email@email.com
DocumentRoot /var/www/
<Directory />
[Code]...
I have no understanding on DNS setup and how it works so I'm a complete novice. SECOND question do i have to setup any sort of dns setting from my Linux server or has yahoo covered it for me already?
I have a problem with apache server. The thing is - I can connect to my server on localhost, but when I try to connect from local network, it doesn't reply.
I can ping my web server from lan. I can ssh my web server from lan.
I haven't modified iptables since install except these commands>
Code:
iptables -A INPUT -p tcp -s 0/0 --sport 1024:65535 -d $MY_SERVER_IP --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables -A OUTPUT -p tcp -s $MY_SERVER_IP --sport 80 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
[Code].....
So i want to remove Apache2 so i can compile my own edited version. But when i do it says that it cant remove it. here is a 'log':
Code:
geisst@ubuntu:~$ sudo apt-get purge apache2
Reading package lists... Done
[code]....
How to resolve this apache2 problem I keep getting, I have installed a debian LAMP server with ispconfig3 and everytime I reboot apache fails to start, I don't know and I have done some research but nothing seems to work, which leads me to reinstall everything from scratch again, I think I have reinstalled at least 10x or more.
When ever I reboot I get the following error
Code:
Very new to Ubuntu (linux) in general and read various forum and threads to get .pl file to run on a new Ubuntu 9.10.My cgi-bin is in /var/www/site/cgi-bin. The server will run 2 websites site1 and site 2. Site2 is html only and site1 has some cgi and pl files. Everytime i get to the cgi-bin/other_director the browser tries download the file or even if going directly to index.pl. Please find attached my site-available for both default and site1 for your consideration. I also ran a2ensite site1 and a2ensite site2, the reloaded the apache2 serverQuote:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
[code]....
I'm a newb when it comes to linux operating systems so I'm attempting to get better through experience. I work for a web development company and we use Ubuntu for our operating systems (the programmers at least). Anyways, I'm trying to install LAMP services and get them working. I have all L.A.M.P. services installed... but Apache2 is giving me a problem. I have an .htaccess file installed in a directory under my document root. But Apache2 is not interpreting it. I have AllowOverride All on but I can't figure it out. I did make a bogus .htaccess file attempting to make apache give me a error, nothing.
View 2 Replies View RelatedI'm configuring an Ubuntu server that's running x64 9.1. I installed the LAMP stack during the os installation and now I need to build an apache2 module. It appears as though apxs is missing. I've installed apache2-threaded-dev but am still missing apxs2.
View 4 Replies View RelatedI have had a LAMP setup on my computer for a while without any trouble but I have suddenly become unable to access it through either localhost or my IP address. I have tried removing and reinstalling the packages but it still doesn't work and the /var/log/apache2/error.log does not give me any errors.
Here is my apache2.conf
[URL]
I'm running 9.10 and apache2.I have a virtual hostThis works. I'm trying to share some files in a directory: added this in the virtualhost section:
<Directory "/var/www/hindbrain/test">
Options Indexes MultiViews +FollowSymLinks
IndexOptions +FancyIndexing
[code]....
I can't get my apache2 log files to rotate on an Ubuntu 8.04 64-bit server install.
Does anybody know of logrotate creates an error log somewhere by default?
Here's my /etc/logrotate.d/apache2 file if someone has any insight if I am doing something wrong.
/var/log/apache2/*.log /var/log/apache2/portal/*.log {
weekly
missingok
rotate 52
nocompress
[Code].....
I'm using Ubuntu 9.10 with Firefox 3.5. I am trying to open a local php file in Firefox. I already installed Apache2. I already installed the PHP5 modules for Apache2. I already tried restarting Apache2 and I cleared Firefox's cookies and cache. Apache2 is currently running and PHP is in the "mods-enabled" folder. Yet every single time I try to open a local PHP file, Firefox asks me what program I want to use to open it. I have no idea how to proceed at this point.
View 7 Replies View RelatedI currently have a virtual host setup to accept SSL connections as follows:
Code:
<VirtualHost *:443>
DocumentRoot "/var/www"
SSLEngine on
SSLCertificateFile /etc/apache2/ssl/apache.pem
[Code].....
How would I change it so that it can only be accessed via HTTPS ??
