SUSE :: Apache2 Reload Error Cannot Load /usr/lib64/apache2/mod_dav_svn.so Into Server?
Nov 19, 2010
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80 no listening sockets available, shutting down Unable to open logs failed!
I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I would like to ask how can I optimize apache2 load on my dedicated server. I am hosting Facebook applications on it, but most users will get a Timed Out message when they try to access it. I was tinkering with MaxClients directive in apache2 config, and it got better, but still it's not best. Programmers are trying their best to optimize the applications at their side, but I am afraid this is an server issue.
Installation of SUSE 11 server now when I try to configure apache2 (opening port 80) I get a "cannot adjust apache2 service" error??? Can anyone shed some light on this.
For a bit of background info, the end result i'm trying to achieve is for files that get uploaded via a php script to be owned by the user account that owns the script rather than by the apache user.
I currently have a massive problem with my main webserver: one of the SCSI drives where I keep my htdocs seems to have failed (sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 7797601).
Since I have no backup (dumb!dumb!dumb!) of it, I tried to copy what I could on the fly, but that failed miserably. The next idea was to umount the volume and try remounting it R-O, but I have a bunch of apache2 processes that are apparently reading/writing on it and I can't seem to find any way of terminating them. I tried via init script, killall and kill -9 but they just don't respond. Until I can terminate those processes, I won't be able to unmount the drive and try saving what's left of the data.Oh and the cherry on top of the cake: the server is 1100 miles away so I can't even access it physically..Is there any way I didn't think of to get rid of those apache processes?
I have installed a LAMP server (Debian Lenny + Apache2 + PHP Version 5.3.1-0.dotdeb.1). On this machine, my web application (PHP + MySQL) exists in 2 flavours:
- Dev - Prod
In /etc/apache2/sites-available, I have ims & ims-dev, one for each instance. Their contents are identical in terms of settings, except for the paths (dev/prod):
I am in the process of writing a web-application using apache,mod-python and cheetah. I installed apache2, mod-python and cheetah and also enabled the userdir module in apache2 so that i can host the webpages inside my public_html folder.
The public_html folder has a folder named 'site' which gets displayed when I type "url" in the browser. There are subfolders inside this 'site' folder and the site folder also has an index.html page inside it.
But when I click on the site folder in the browser, I get a 'Requested url /~myusername/site/ not found'. There are files inside the folder with 777 permissions and still I get this error.
I use Ubuntu Jaunty with the following configuration - 'Apache/2.2.11 (Ubuntu) PHP/5.2.6-3ubuntu4.1 with Suhosin-Patch mod_python/3.3.1 Python/2.6.2 Server at localhost Port 80'.
These are the lines I have added to the /etc/apache2/sites-available/default file
Code:
<Directory "/home/myusername/public_html/site/"> SetHandler mod_python PythonHandler mod_python.publisher PythonDebug On PythonAutoReload On
When i try to install rpm package for apache2 the command line gives error: Failed dependencies:
apache2-MPM is needed by apache2-2.2.3-16.18.x86-64 libapr1 >= 1.0 is needed by apache2-2.2.3-16.18.x86-64 libapr1< 2.0 is needed by apache2-2.2.3-16.18.x86-64 libapr-1.so.0()(64bit) is needed by apache2-2.2.3-16.18.x86-64 libaprutil-1.so.0()(64bit) is needed by apache2-2.2.3-16.18.x86-64
I was trying to install from the suse disc . I thought that rpm would automatically solve problems with dependencies as these dependent packages must be present on disc too.
My apache and wordpress were running fine till this morning. I ran updates via webmin,though I wasn't sure what those updates were for.
Then when I tried to access mysite.com, index.php downloads instead of opening.
I tried some troubleshooting and followed a form where it was advised to enable mod php5, so I did a2enmod php5 and tried to restart apache. Since I get this error Cannot load /usr/lib/apache2/modules/libphp5.so into server.
we have an ubuntu server (10.04 LTS) with apache2 (2.2.9) and mod_proxy + proxy_balancer enabled.Reverse proxy works greatly, but I can't get load balancing working. Apache connect always to first member.
My configuration is as follow:
ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> <Proxy balancer://test>
I am trying a release of Ubuntu has have run into a problem that does not make much sense. I am receiving the following error: Syntax error on line 20 of /etc/apache2/sites-enabled/portal: Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration fail! I believe the modules required for this is apt-get install libapache2-mod-proxy-html and it shows under the available modules and it was enabled with a2enmod proxy-html.
The line from the config is ProxyHTMLEnable On. The release is the latest download with updates from, 32bit.
I want to separate the Apache2 Error log to log certain events in a specified file. For example: client denied by server configuration > denied.log Directory index forbidden by Options directive > forbidden.log I would like it add it to the logs as the events happen, and like the other logging systems, create new files when the current is full. i.e. denied.log.0
I have just installed Apache2 v. 2.2.17 on Ubuntu,and I am trying to get it to work with Ruby (v 1.8.7). I have followed the instructions on the Ubuntu site and ended up installing Phusion Passenger v 3.0.7, making the suggested changes to the httpd.conf file.
When I launch Apache2 I now get the message:
Cannot load /usr/lib/ruby/gems/1.8/gems/passenger-3.0.7/ext/apache2/mod_passenger.so into server: /usr/lib/ruby/gems/1.8/gems/passenger-3.0.7/ext/apache2/mod_passenger.so: undefined symbol: ap_get_server_banner
I have found a bug report (url) that suggests "adding a dependency" but am not sure how to do that. Any kind soul out there can take pity of this eager Linux neophyte?
My apache2 logs aren't being rotated, I have 1 log nearing 100MB in size.
Error shown below when a logrotate happens on apache2 logs:
Code: error: other_vhosts_access.log:5381 unknown option 'jack' -- ignoring line error: other_vhosts_access.log:5381 unexpected text "jack" is a sub-domain.
I have just booted up to do some local work on my website and apache 2 has start throwing 403 error's at me? phpmyadmin and other alias's I have setup work but the main root just 403's on me?? It has been working away flawlessly for months now. No system upgrade has recently updated Apache and I can see no errors in my set up files!
My default setup file: Code: <VirtualHost *:80> ServerAdmin webmaster@localhost
DocumentRoot /home/gavin/wwwsite <Directory "/home/gavin/wwwsite"> Options +Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny Allow from all </Directory> .....
I wanted to setup a local Apache2 server for some programming and testing. I installed and got Apache2 working with PHP, MySQL and all works fine. Now I wanted to add an additional directory to somewhere in my /home. And that's where things went wrong. I went to edit /etc/apache2/sites-available/default. This is it:
Code: You don't have permission to access /po/ on this server. So I go to the logfile; which says this: Code: [Sat May 08 16:43:51 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /po/ denied
I tried a lot of stuff using chmod and chown, but all to no avail. I tried to change the ownership of the /home/name/web to root, and to www-data, I changed file permissions to allow executing the files.
I'm running 10.04 with Apache2/PHP5.x I wanted to test some basic cgi scripts, but my browser is displaying the code (#!...) If I run the scripts on the console, they work fine so CGI is not the problem, it's apache. To install the CGI module I ran sudo apt-get install libapache2-mod-perl2 with no problems. By the way, I installed Apache through apt-get instead of doing it manually, but it seems that the installation divides the conf file in different parts, so the regular apache2.conf has this:
Code: # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf [Code]....
I can't figure out what I need to do to get CGI working on my server.
I seem to be having a problem with mod_proxy and https websites. A simple connection to port 80 works fine but all calls to 443 fail.
I had a look at my firewall but can't see anything that would block port 443, although I get no tcpdump traffic on that port on the deb01 client when I try and connect to it. I disabled the firewall but still no luck.
My configuration consists of 3 VMs (KVM) each running a different website.
I get the following error when connecting to ssl deb01
Code: An error occurred during a connection to deb03.example.com.
SSL received a record that exceeded the maximum permissible length.
I am having some problems after installing apache2-mpm-itk on my Debian 5.4 server. From my understanding apache2-mpm-itk will run child processes as root until a http request is received. It then suid's to the username in the VirtualHost directive. This is all working fine, as I can see a few apache processes started by a specific user.
However, the problem is when I try to restart apache. It will kill all the processes running by root but wont kill any of the processes that have been suid'ed to another username.
When i attempt to restart I get this error:
Code: charged:/etc/apache2# /etc/init.d/apache2 restart Restarting web server: apache2 ... waiting (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
[Code]....
If I do a "ps aux | grep apache" before and after I see all the root processes killed, but processes running as specified users from VritualHost directive remaining.
Now I am not an extreme linux power user, but I know a bit.
I downloaded grails [URL]... and installed it. Created a sample application hello world. It was running successfully. In browser [URL].. I was able to see grails running. Now comes the problem. To be able to always start the grails application running after boot I wrote a script in /etc/init.d/software_grails its contents are
[code]...
I have to open command prompt and go to /root/helloworld and then execute grails run-app. you dont have to write the name of application to run it. logging of boot messages is enabled /etc/default/bootlogd BOOTLOGD_ENABLE=Yes. then I opened /var/log/boot.
[code]...
But it does not work. If I am not wrong then above method will work ONLY WHEN some one Logs in not on boot time. Is there a way where I can embed grails in apache2 they [URL]... have not mentioned any thing about apache2 to deploy my applications.
I want to learn perl CGI. I tried to configure it on apache server. But when I was searching about it in the net, I faced some difficulties. Each and every post has been leaded me in different way. I am confused now. I have done this,
1. Installed this libapache2-mod-perl2 module
2. Then I checked the /etc/apache2/mods-available/ using ls command for checking the module availability.Here I mentioned the output of ls command.
I have a problem about redirection over Apache2 over Debian Lenny. We have build a LAMP, and our programmer make a software with these features:
When you put on your browser (i.e.) [URL], you access to the program in /var/www/vhosts/hugohome/inside. And when you put [URL] you access to the program in /var/www/vhosts/hugohome/outside. Today, if you just put [URL] our Apache answers 403 (forbidden), because we had blocked folder access. (You know....isn't the right way). Our Apache's Document Root is in /var/www/vhosts/hugohome.
Our goal is to change definitely [URL] to access -> /var/www/vhosts/hugohome/inside. This is our main intention. Also, we can continue with [URL] pointing to /var/www/vhosts/hugohome/outside. I thought, hmm easy!: I can change the DocumentRoot to /var/www/vhosts/hugohome/inside and try with an Alias to outside. But the problem is that the programmer has taken the software reference with /var/www/vhosts/hugohome and when I tried to change the Document Root the programs didn't work fine (loops, error 404, etc).
How can I do?. I have tried with Apache with many manners, but I just have a relative success with: "RedirectMatch ^/$ [URL]". It works, but the Browser shows the ugly [URL]. Our intention is just show [URL]. Unfortunately we can't work directly with the DNS servers, and I guess that I can resolve with (i.e.) Apache and Bind together.
why apache2 won't run my shell script i made.So in detail this is what i want it to do. I have a apache2 web-server running on my mac and i found some shell commands that control itunes so i wrote a shell script that basically pause's itunes. Now i have put the shell script in the cgi executable folder. and the link for the webpage is http://10.10.0.110/cgi-bin/itunes.sh but when i goto the page in my browser it just keeps loading. I have run other scripts and they work and i don't think you need root access.
