I install Debian on a Power book g3 and i need the right click function. I try mouseemu but it give me an error: open: No such file or directory No uinput device found! Make sure the uinput module is loaded or CONFIG_INPUT_UINPUT is compiled in kernel. if there are other way for the right click function?
View 3 RepliesWhen I first installed VMWare Workstation and Player everything ran great. I guess after a system restart things started to get buggy. When trying to load my virtual machine I get the following error:
Could not open /dev/vmmon: No such file or directory.make sure that the kernel module `vmmon' is loaded.Failed to initialize monitor device. Unable to change virtual machine power state: Cannot find a valid peer process to connect to I have tried running as root, through terminal, and reinstalling. The window still shows up eventually.
Error "cannot open shared object file: No such file or directory" using updatetool on Glassfish 3 (Squeeze 64 bit)
[Code]....
I have an Ubuntu server x64 (10.04) that is running FOG for imaging Its installed on an Intel server board (1 RU rackmount) I configured the RAID in an Intekl based BIOS utility which Looks similar to This Ubuntu installed and runs perfectly. however im unable to monitor the status of the drives from the OS, so Im unaware of any drive failures that may occur I manged to install megacli but it returns blank data (along with exit code: 0x00) Iv also tryed megactl wich says
Code:
unable to open device /dev/megadev0: No such file or directory
one of my colleagues who had used the server previously was certain that the raid was on board the intel site also makes mention of intel using LSI products in their RAID controllers Relevant section of dmidecode:
Code:
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Intel
[code]....
So when I click Places in the Main Menu and then any directory like Desktop or Documents or Pictures the Movie Player starts, and all the files that the directory contains are in the playlist. The only way around is to click Computer which would bring me into the file manager as normal.
View 2 Replies View RelatedI'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
i have a problem with realplayer 11 i can't open it due to that error message
Code:
/opt/real/RealPlayer/realplay.bin: error while loading shared libraries: libgdk-x11-2.0.so.0: cannot open shared object file: No such file or directory so how can reveal this problem
my squid show like this when i try create swap directory
[Code]....
Salutations,I've been struggling with getting audacious working for the past hour. I'm using synaptic to install it. When trying to run it from the bash, I'm getting the following error:
Code:
audacious: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory.I tried to make /usr/lib/libmowgli.so->libmowgli.so.1 link, but it didn't help. Tried reinstalling audacious/libmowgli and a few others packages, but in vain, too.
I installed ubuntu maverick a couple days ago, total newbie. After trying to install some software I no longer can access any of the Places folder and get an error - file not found.
I can open Computer, partitions and devices, just not the first 7 folders which i think are bookmarks.
Thanks for helping, U.
Ok, I eventually solved it. Appears I had inadvertently selected another program as default folder openenr. Just opening any folder with right click - open with - folder openenr reassigned nautilus and opens Places folders ok.
I am trying to install flash-plugin-10.0.45.2-release.i386.rpm so I inputed the folowing command and got the following error output:
Code:
bash-3.1$ rpm -i *.rpm
error: cannot open Basenames index using db3 - No such file or directory (2)
error: cannot open Providename index using db3 - No such file or directory (2)
error: cannot open Conflictname index using db3 - No such file or directory (2)
error: Failed dependencies:
[Code]...
I am running a fairly new Debain Jessie stable installation with Xfce desktop. I need to use Xfce4 becuas the standard Gnome 3 does ot work when logging in with xrdp which I use becuase the actual box is headless.
I have an issue when starting synaptic. When I start it from the menu entry it just does not start. When I start from the terminal with
Code: Select allgksudo synaptic
I get an error box "Unable to copy the user's Xauthorization file" At the same time I can see in the terminal window a message
"Error copying '/home/userxxx/.Xauthority' to /'tmp/libgksu-SwcIe0': File or Directory not found".
I assume it is related to that I use a rdp session to connect, but I am otherwise clueless.
Code: Select alluserxxx@server2>xauth
xauth: file /home/userxxx/.Xauthority does not exist
Hi,
Can you help me to install OpenCS PKCS on Ubuntu 10.10 with Firefox 3.6.
I have smard card reader Gemplus
Here is error:
HTML Code:
dejansoftware@ubuntu:~$ pkcs11-tool --show-info
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
[code]....
CentOS 5.3 has been running fairly good except for a slow ethernet connection so I thought I would upgrade to CentOS 5.4 to see if that improved things. I had previously changed fstab and menu.lst to use UUID instead of LABEL in order to insulate myself from partition label changes I wanted to make. This worked fine in CentOS 5.3. When I attempted to upgrade from 5.3 to 5.4 using the installation disk and telling it to upgrade rather than do a new install, the installation correctly found my root partition as /dev/sdb8. When I proceeded with the upgrade I received the error:
"Error mounting device UUID=cee298a0-9c47-4a3a-ac84-23db4d20edd5 as /. No such file or directory. This most likely means the partition has not been formatted."
But of course it has been formatted and is my / partition running CentOS 5.3 as I type. how to fix this to get CentOS 5.3 upgraded ? Di I have to use LABEL in fstab and menu.lst for my partitions,or perhaps just for my root partition ? Any other ideas why this is failing ?
I upgrade the system from 11.1 to 11.2 seems everything work fine, no error no warning, after a reboot the consol show : mount error while loading shared libraries: libvolume_id.so.1: Cannot open shared object file: No such file or directory. when I try to repair the system the repair tool cannot find the root partion,
View 1 Replies View RelatedYou may know the Humble Indie Pack 2, which is a set of crossplatform indie video games. There's one game in the bundle that doesn't offer a 64bit build and therefore it fails to load. It's called Braid and that's what you get when you try to run it: $ ./braid ./braid: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
Of course the 64bit libs for OpenGL and the propitiatory nvidia drivers are installed, but the game asks for the 32bit ones, at least to my understanding. I do know that why can install 32bit libraries on a 64 bit linux system (we do that for the sake of crappy Adobe Flash), but I don't know where to find these libs (searching the repo with keywords like .i586 or ia32 led me nowhere).
how to install libxcb-xlib.so.0?When I start one software and it complains that
"error while loading shared libraries: libxcb-xlib.so.0: cannot open shared object file: No such file or directory"
I have lastest libxcb1 installed and searched in my system but didnot find a relevant result.
Attempt to upgrade 10.10 to 11.04 server installation (more or less plain vanilla) gives:
[Code]...
Tried reinstalling the obvious packages related to this, no change. Aptitude updates to 10.10 function without problems.
I installed the latest Gimp beta and it worked fine but then I couldn't open it. I removed it and I reinstalled but it didn't work, so I installed the latest stable version (no beta) and it still does not work, when I open it form Terminal, this is the response:gimp: error while loading shared libraries: libbabl-0.0.so.0: cannot open shared object file: No such file or directory
View 3 Replies View RelatedI've installed pulseaudio on my server running squeeze using this guide [URL], but i don't like it and would like to remove it. I tried uninstalling all the packages and deleting the /etc/asound.conf file, now it seems like pulseaudio is gone but alsa seems to be broken. When i run alsamixer i get the following error:
cannot open mixer: No such file or directory When try to play audio using aplay i get the following error:
[Code]...
in order to install OpenFOAM, I need to
> source ~/.bashrc
but I get an error file or directory not found...
I installed Ubuntu 9.10 a few days ago, did the updates, surfed on the net, mounted a slave drive and read everything on it, shut down, pulled the slave out and now I can't boot.
After the post screens I get: Verifying DMI pool data
Grub loading
error: the symbol 'grub-device-open' not found
grub rescue>
I think way back I had to reinstall grub or something on another machine I had but I don't remember anything about it. Is that what I have to do and how? Is it because I pulled that slave drive out that this happened? I want to get some more files off the slave as I wasn't finished.
I want to change File NOT FOUND ERROR MESSAGE to my own message buw how come I do this by terminal ?
View 3 Replies View RelatedI am using xubuntu and there are a few types of files on website that instead of downloading and saving and then opening with emacs, I would rather when the radio button choice comes up say open with emacs. I am using xubuntu with xfce, and there is no line for a command to be entered as some ubuntu editions have. In the choice of changing the opening program from mousepad to something else, it says search and allows to navigate to find a program, but I cant find emacs anywhere not in etc/ or elsewhere. So where is its executable to direct the program chooser to?
View 1 Replies View RelatedI am currently using Ubuntu 9.10. I am writing a small code in C which test the connectivity with MYSQL. I am getting this error. "libmysqlclient.so.14: cannot open shared object file: No such file or directory" What I understand is that you need MYSQL development package in order to access MYSQL database in C. I installed MYSQL using this command. apt-get install mysql-server mysql-client
View 2 Replies View RelatedI just installed debian from debian-live-8.2.0-amd64-standard+nonfree.iso and after installation, which finished without problems, I cannot boot the system. I get the error:
Code: Select allfile '/boot/grub/i386-pc/normal.mod not found
From grub-rescue via ls command I see that I don't have the i386-pc folder inside /boot/grub. I have only two files:
unicode.pf2 and grub.cfg
I created a USB Live disk and installed Fedora 12 to my Asus EEE 1005HA (12 inch screen). The machine boots fine, but Hardware Graphics acceleration is not working correctly. If I stop X11, and type "Xorg -configure", the Xorg utility recieves a segmentation fault and exits, and the resulting xorg.conf file does not work correctly. The error is "(EE) open /dev/fb0: No such file or directory". All the correct packages are installed, and there is no logical reason why it is failing. The rest of the hardware on the EEE works fine.
View 2 Replies View RelatedI have a new installation. I try to boot and instead of my grub menu, I get "error: file not found" and am dropped into the rescue prompt. I have just a standard "Desktop" installation. I installed from the 5.05 net install cd. I installed grub to the MBR.
partitions are:
hd0,2 is /
hd0,5 is swap
entering the "set" command results in:
prefix=(hd0,2)/boot/grub
root=hd0,2
[Code]...
I am trying to use my Wiimote with ubuntu. I have followed the guide on here:[URL].. But I get this error when I run modprobe:
FATAL: Error inserting uinput (/lib/modules/2.6.32-22-generic/kernel/drivers/input/misc/uinput.ko): Operation not permitted