My scanner is Benq 5000 ,the default scanning software (xsane) give me the following message whenever I plug the scanner to the pc :
Failed to Open Device 'Snapscan:libusb:005:002' Invalid Argument.
I tried the gnome image scanning software too but it didn't recognize the scanner at all. The only software that worked is vuescan but unfortunately it is non-free software !!!!
how to run benq scanner 5000 and web cam im ubuntu
View 1 Replies View RelatedHave Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports
'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..
I have recently installed Fedora11 and have managed to get the printer side of the above multifunction machine working but not the scanner . The computer recognises the scanner and sane, xsane, sanelib's etc are all installed . When I try to open it it gives the following:
Failed to open device 'brother3:bus5;dev1': Error during device I/O
I'm trying for the first time to work with sounds and edit them. I'm trying to use Gnome Wave Cleaner and don't know what to do about the error.
View 1 Replies View RelatedI run Ubuntu 9.10 locally connecting to CentOS5 on a remote server.When I run the following command in the Terminal;ssh -v -L 10005:localhost:10000 root@remote_ip_address -F ~/.ssh_config -i ~/.ssh/private_key_file_nameafter 'Authentication succeeded (publickey)' I get the following for channel 1;sys_tun_open: failed to open tunnel control interface:Permission deniedhowever, it does open an interactive client-session on channel 2 and my browser will then connect (via URL localhost:10005) to Webmin on the remote server which is the object of the exercise.However, because sys_tun_open failed, I am concerned that the transactions may not be encrypted as I understand they would be in proper tunnelling
View 4 Replies View RelatedMy new Benq DC E1050 camera will not connect to either of my Debian Unstable fully updated systems. It connects OK to a Windows 2000 PC and to my Elonex OneT+ netbook running 3MX. I can access the card in a card reader but when I connect the camera it flashes up a "USB error" message and switches itself off. On the PC side dmesg|tail -60 gives me
Quote:
[ 1991.144290] usb 2-2.3: new high speed USB device using ehci_hcd and address 5
[ 1991.236929] usb 2-2.3: New USB device found, idVendor=04a5, idProduct=30b8
[ 1991.236931] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1991.236934] usb 2-2.3: Product: DC E1050
[ 1991.236936] usb 2-2.3: Manufacturer: BenQ
[Code]...
I am trying to get Canon MP250 printer and scanner working in OpenSUSE 11.3 and so far I've had limited success. Both components work up to a point, but aren't fully operational.First of all, I installed the drivers from Canon website for both parts of the multifunctional device. Here's the report on the versions (it's localised, but it shouldn't be hard to understand ).
The printer works for the most part. But it fails to set images to greyscale when I request the driver to. There are some guides about that for Ubuntu, but none for openSUSE that I could find. Also, what does the setting "Amount of Extension" in the printer options do?It would also be nice if I could set the printing quality as well. Right now it seems to print everything with the default quality setting, but personally I like using lower print quality since that saves ink and makes it a little faster.
The scanner, however, is hardly usable at all. If I try to use Canon's ScanGear MP to scan, I can hear that it operates the scanner, but the program itself freezes and after a while gives me the "Cannot communicate with scanner" error. On certain settings I can also hear that the scanner itself doesn't complete the scan (the indicator on it also reports an operation in progress, but it never gets completed).If I try to use Acquire images, the native KDE scanner application, I can get it to scan, but only on very specific settings: it must scan it in colour and the resolution must be equal to or over 300 dpi. If I try anything else, the resulting image file is completely blank or I get an "Error during device I/O". And, of course, it can't save PDF files.
I just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
I just installed bt4 on vmware....internet is up and running and when i try to run airodump i get the error stated above. I installed ndis wrapper it would resolve my issue but it did not fix it.
View 4 Replies View RelatedI have been working on this for a while now and am absolutely stumped. Basically, what i am attempting to do is make my ubuntu box into a gateway for my network. I have everything working thru hard wire, but I simply cant get the wireless to work. No matter what I do, I cannot get my wireless card to transmit an essid and allow nodes to connect. I have tried assigning it in the interfaces file (shown below), and I have also tried manually modifying it using the iwconfig command. Here is the topology:
eth1: internet WAN
eth2: ethernet out to LAN
ra0: wireless out to LAN
Here is a copy of my /etc/network/interfaces file:
[CODE]
auto lo
[Code]...
I'm having some difficulities with truecrypt and cannot figure out what's wrong since this is my first attempt to create hidden encrypted partition. I'm using ubuntu 9.10 64b with latest 6.3a truecrypt. After using truecrypt gui (just command truecrypt) I've tried: create volume-->create volumne within a partition/drive-->hidden trucrypt volume --> select some /dev/sdX by my choice --> select aes & sha512 --> password --> and format it.
when formating finished message "wrong ss, swith or wrong superblock of /dev/loop0" appeared. I've got no idea what could I do with it neither know whats program trying to do! Ok formating's done, then if you're trying to mount that partition then I would expect prompt for password, but that did not happen ...
EDIT: sudo mount /dev/loop0 /media/tmp/ also complaint about wrong superblock, but that does not ring any bell since i've got no idea what /dev/loop0 is or is for...
EDIT2: I've tried another approach also:
sudo truecrypt -t -c
sudo truecrypt -t /dev/sda3 --filesystem=none
but the first command finished creating 100G drive in 1 sec (nonsense) and latter one prints:
Error: device-mapper: reload ioctl failed: Invalid argument
Command failed
my sound works when i boot up but as soon as i play a couple of files with VLC video or audio it doesn't matter the sound stops and comes up with an error saying: ALSA version problem:VLC failed to re-initialize your sound output device. Please update alsa-lib to version 1.0.22 or higher to fix this issue.Potential ALSA version problem:VLC failed to initialize your sound output device (if any).Please update alsa-lib to version 1.0.23-2-g8d80d5f or higher to try to fix this issue. I found latest version on net and installed and yast said install fail version already installed my sound device is HDA Intel (ALC C880 Analog)
View 1 Replies View RelatedI have a Feadora 12 Live CD. It booted up fine on my 700 Mhz computer. I've since then put a new HDD in with which I intended to install Fedora on. But now i get this message
Quote:
No root device found. Boot has failed, sleeping forever
What does this mean? How do get the Live CD to boot?
I'm getting these messages Over SSH with the -D switch
Code:
At uni I did this for a couple of reasons, primarily to connect to trackers for bittorrent. I would get these messages fairly often but I never thought much of it because I figured I was just loosing packets over the network or something (understandable in my situation). At home I decided to continue to use this method because that computer is set up in DMZ and is very useful. I havn't received many of these messages but recently all my torrents stalled and I had a whole bunch of these messages. Is it possible my computer just cant handle all the network connections (it's a 2ghz AMD running debian)? What exactly do these messages mean? Is there any way to optimize my connection in any way?
I just received a Canon Pixma MX320 as a gift.
I am currently running the Ubuntu 10.04 OS
I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.
Unfortunately I am not having the same luck with the scanner.
I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.
Vista refused to boot past login and eventually froze up in safe mode, preventing me from even safely copying files to a storage device. My friend suggested trying Ubuntu temporarily, and I'm currently running it as a trial from a key thob.I'm very much a newbie to the OS but after some getting used to and playing around over a few days Im happy to make the switch permanently. I managed to take off the needed files, and then went on to do some cleaning up of my harddrive to make some room for a partition for Ubuntu. I was removing things like old music, videos and games, nothing vital, but after I reset I tried to enter the C drive Im given this message:
Error mounting: mount exited with exit code 18: Failed to open hiberfil.sys data attribute: No such file or directory Failed to mount '/dev/sda2': No such file or directoryMy HD is currently partitioned for two 150gb drives, and I can still use my D drive fine for all purposes.
i need to install vpnc in amazon ec2 fedor 8 instance. i have installed with yum install vpnc commaned. And i have placed config file in /etc/vpnc/some.conf. but it is not connecting and giving the following error.
vpnc: can't open /dev/net/tun, check that it is either device char 10 200 or (with DevFS) a symlink to ../misc/net/tun (not misc/net/tun): No such device.
Hello,
this error spams about 100 times, then the scanner does indeed work. So I'm not completely broken, but the error messages are of concern, and it slows down the process of scanning for the time it takes to do the messages.
Error in console:
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes.
my sript runs:
scanimage
--device $MODEL
--resolution=$RESOLUTION
-x 5104 -y 6840
my groups:
uid=1000(fogie) gid=100(users) groups=100(users),7(lp),11(floppy),12(mail),15(man),17(audio),18(video),19(cdrom),20(games),21(sloca te),83(plugdev),84(power),86(netdev),93(scanner)
Even a simple:
scanimage -Lv
in console gives this on a separate --current pc as well.
The error message I keep getting during mounting is:-
device-mapper: remove ioctl failed: Device or resource busy
This is from ane external USB HDD I use as a backup device. I've tried formatting it as ext4 ane encrypting it from the command line
# mkfs.ext4 /dev/sdc1
# cryptestup luksFormat /dev/sdc1
which run without errors but an attempt to mount throws up the above error as well as saying - you must specify the file type (tried that) - and fails to mount. I've tried using YaST to format and encrypt it which throws up the same error when I run mount but actually does actually mount the filesystem Googling around has brought up info saying that it's probably a race condition brought on by invalid udev rules. I've got a (mostly) working system and the udev rules documentation leaves more confused than when I started.
I also had ever tried all methods they mentioned, but my problem is still there. I am using a MAC OS X 10.6 ssh a remote redhat server. I hope to see X of redhat on my own MAC. Below is what I've done: 'MAC_ip' stands for my mac; 'redhat_ip' stands for redhat server.
1) ssh to redhat server
2) change to root
3) type command: DISPLAY=MAC_ip:0.0
4) type command: export
5) Back to MAC
6) change to root
7) type command: xhost +Redhat_ip
8) vim /etc/ssh_config, add X11Forwarding yes
9) Back to redhat, type: xclock
I got below message: Error: Can't open display: MAC_ip:0.0 I also tried some methods to login as others suggested:
[Code]....
I install Debian on a Power book g3 and i need the right click function. I try mouseemu but it give me an error: open: No such file or directory No uinput device found! Make sure the uinput module is loaded or CONFIG_INPUT_UINPUT is compiled in kernel. if there are other way for the right click function?
View 3 Replies View RelatedOn compiling open-vm-tools-8.4.2-261024 on Fedora 13 x86_64. When I run make, it failed on stage 2 with these error messages:
I think I have to compile these modules into the kernel.
I just got a new scanner HP Photosmart C4640 and tried to set it up on Ubuntu 8.10SANE has it as supported, but I can't scan.Printing works fine. when I run xsane I get
Code:
Failed to open device 'v4l:/dev/video0': Invalid argument.
Poking around I found ScanningHowTo page. But I was unable to find the .fw, .usb, or a PPD
[code]....
I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
When i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
I have a Brother MFC-240C inkjet printer & scanner. On installation of Maverick Meerkat v. 10.10, my scanner function failed. I added the same line into the file as for Lucid Lynx v. 10.04 and the scanner has scanned perfectly. The lines Brother gives are for the following file: Ubuntu 9.10, 10.04
1. Open "/lib/udev/rules.d/40-libsane.rules" file.
2. Add the following two lines to the end of the device list. (Before the line "# The following rule will disable ..."):
# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"
above is found at: [URL]
Ok, so a few weeks back my 6 year old daughter wanted to scan a picture she had made for a school project, I hadn't used my AGFA snapscan e20 for years, Infact it had been in a box for more than 5 years.
anyhoo I thought I'd give it a go and with some doubt plugged it in. Much to my joy and my daughters joy it just worked, there was life in the old dog still So two or three weeks on after I've installed a kernel update as well as others on my daughters Dell Optiplex GX620 Ubuntu 10.04 LTS (2.6.32-30-generic #59-Ubuntu SMP), my multi operating system literate 6 year old has drawn another master piece and popped it in the scanner only to recive the following error from simple-scan
What I'd like to know is,
1, How do I remove the entry for the scanner in simple-scan (ahh the old reinstall never fails)
2, why am I getting nothing back from my tail
3,Why did it break in the first place?
4, how to fix it (if not with a reinstall)
Please help as I don't want to break the "My Dad can fix anything" illusion my daughter has just yet.
I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
View 2 Replies View RelatedI have a problem here where sane no longer detects my scanner.
Code:
lsusb
reports
Bus 007 Device 002: ID 03f0:5b17 Hewlett-Packard
Code:
sane-find-scanner
reports:
found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x5b17 [HP Color LaserJet CM2320fxi MFP]) at libusb:007:002
Code:
scanimage -L
reports
No scanners were identified. xsane reports no devices detected (I have it in French, "Aucun p'rif'rique disponible"). I get the same when I launch xsane as root, so I doubt it is a usb-rules issue. It used to work; I checked /proc/bus/usb, but that is empty.