I noticed after upgrading my Dell D820 from 11.3 x 64 to 11.4 x64 that splashy seems to crash while trying to render the theme (while hibernating). Running a splashy test returns the same error: "Splashy ERROR: Couldn't splashy_start_splashy(). Error -10". Using the default theme instead or re-installing splashy does not make any difference.
View 2 Repliesi tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
When I try to do
[code]...
I've tried the method described here: [URL]... However, I'm still getting the same error.
I just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
This is an example of the error I receive when trying to do an update via YaST, YaST2, or zypper. Basically, curl is broken. With out it functioning normally, I can't use openSUSE's update mechanism to fix my system. Need to find a way to manually fix / upgrade curl.There was an error in the repository initialization.'Updates-for-openSUSE-11.4-11.4-0': [|] Valid metadata not found at specified URL(s)History:
- Unknown error reading from 'http://download.opensuse.org/update/11.4/'
- SKIP request: User-requested skipping of a file
- Download (curl) error for
[code]...
Whenever I run glxgears or glxinfo from an ssh or vnc session, I get "Error: couldn't get an RGB, double-buffered visual". I can run glx stuff fine on the console under KDE, but that's not practical for the intended users. I've tried updating drivers (it's a Dell R610 w/ Matrox G200ew videa), firmware, rpms, etc., even running ssh with -X or -Y, but to no avail.
View 9 Replies View RelatedI am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies View RelatedI have an HP OfficeJet 5610v installed on my system, and cups can print the test page. I can also get the test page to print via [URL] which appears to be printed under the anonymous user. Now if I attempt to print the test page via the printer control panel from windows, I get the following sets of error:
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb requires write access to USB device nodes.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb couldn't open USB device /dev/bus/usb/002/001: Permission denied.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb requires write access to USB device nodes.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb couldn't open USB device /dev/bus/usb/003/001: Permission denied.
D [11/Feb/2010:11:21:29 -0500] [Job 6] libusb requires write access to USB device nodes.
CUPS is showing that the "user" is my XP login name so I added that user to Linux and even added that account to the "lp" group and still get the above errors.
I have ubuntu intrepid installed in one of the amazon servers , when i try to install any software using apt-get i used to get the following error.Code: E: Couldn't find package E: Some index files failed to download, they have been ignored, or old ones used instead.
View 5 Replies View RelatedWhen i install libdrm, i get the following error:checking for clock_gettime... no.checking for clock_gettime in -lrt... no.configure: error: Couldn't find clock_gettime
It seems that it cannt find clock_gettime function, but i find it as follow:
$ grep clock_gettime /usr/include/time.h
extern int clock_gettime (clockid_t __clock_id, struct timespec *__tp) __THROW;
i get the following error when i try to install autoten: root@Tex dan]# rpm -Uvh [URL]... curl: (6) Couldn't resolve host 'dnmouse.org'
error: skipping [URL]... - transfer failed from reading other posts, it sounds like a dns error, but i don't know what to do to fix it.
My software sources some how got screwed up. Now when I try to install from software manager or Synaptic, I get error messages. Here is the error messages at the bottom of "sudo apt-get update" :
W: GPG error: http://archive.ubuntu.com lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: http://archive.canonical.com lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
How do I fix this ?
When I try to play some OpenGL games, I get this error.How can I fix this? My graphics card is Nvidia, and I use the nvidia-current driver.Here's what it says under OpenGL/GLX Information. I don't know if this is the info you need, but oh well.
GLX_EXT_visual_info
GLX_EXT_visual_rating
GLX_SGIX_fbconfig
GLX_SGIX_pbuffer
[code]....
I have a simple C program which uses ncurses library and I am having linker issues and couldn't get the program to link.
[Code]...
So I think the ncurses libraries are in place but gcc still couldn't link. I am totally stumped.
I use Ubuntu 9.04. Synaptic Software Manager > Repositories > Reload. I have a following error.
GPG error: [URL]... karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 7804AF9D95075E6E. What can I do?
When I want upgrade and/or install any package from software.opensuse.org I've got error, "Couldn't find XML file" or anything same this.
View 4 Replies View RelatedYesterday, I was doing some work (Don't worry, I didn't lose anything), and I restored a terminal I had open, and it completely froze! I couldn't do anything on the desktop, so I tried rebooting. Doing that resulted in an error when booting. It would say "bin/sh : Can't mount" or something like that (Can't quite remember) not too long after trying to start up, and it would leave me stuck with some weird terminal. The only command I know on this new terminal is reboot. What should I do?
Note that I just installed Debian two nights ago and it was working perfectly fine until last night...
The error says "/bin/sh: Can't access tty; job control turned off"
I'm playing with Fedora 12 and can't get GRUB to work. To boot, I've been using GRUB4DOS. While that works fine, I'd like to figure out what's wrong with regular GRUB 0.97. After the initial installation, GRUB came up on reboot, but it was broken -- it couldn't read the config file apparently, and no commands would work correctly. So I attempted to reinstall grub via the grub prompt. No matter what I do, or which hard disk I install GRUB on, I get "Error 18". I tried using the "grub-install" command as well as the prompt, and that did the same thing.
My system here is an ASUS M4A785TD-M EVO mo/bo. I've got four hard drives. Two 1TB SATA drives and a couple of PATA drives (300 and 500GB) on a Si608 controller card. Using the BIOS "BBS" boot menu, I can boot NTLDR and BOOTMGR off active partitions on any of the drives (with proper Boot.ini modifications to handle the change in drive order). GRUB4DOS works as well, and will boot Fedora 12 correctly off any of them (with proper menu.lst ministrations). But GRUB 0.97 that comes with Fedora just refuses to do anything other than say "Error 18".
I am trying to run i386 in gcc_test-suite using dejagnu runtest and it fails with error given below. I can see that gcc-dg.exp is in folder gcc-4.6-20100911/gcc/testsuite/lib, but runtest is not searching in this folder.
how to resolve this issue and run only i386 tests.
$ cd /gcc-4.6-20100911/gcc/testsuite/gcc.target
$ runtest -a -tool i386 -verbose
....
....
Looking for library file /usr/local/share/dejagnu/lib/gcc-dg.exp
[Code].....
I am using Gslapt version 0.5.2b with slapt-get 0.10.2c and when I try to update I get this error message.
Code: Failed to download: FTP: couldn't retrieve (RETR failed ) the specified file. I have tried http ones also but get the same message except instead of FTP: it is HTTP:. Is anyone else having this problem? Are the repositories experiencing difficulties? Is my personal system to blame? Am I an idiot?
I've just recently install slackware 13.1 on IBM R40e laptop but every time i try to start fluxbox with
startfluxbox it just comes up:
However xdm works.
The specs of the computer:
IBM R40e 2684 L9G
2.4GHz Intel celeron processor
128MB ram
ATI radeon 330M 16MB integrated
30GB hard drive
DVD rom drive
I'm not sure if it's of any use but here's my xorg.conf file:
Code:
I wrote a simple code using Open Inventor(OpenGL) classes to print a Sphere in a .png file.I tested it on Windows and it worked well.But when I run it on Fedora 10, I got the following error with no output .png file:
Coin error in glxglue_init(): Couldn't open NULL display. Coin warning in SoOffscreenRenderer::renderFromBase(): Could not set up an offscreen OpenGL context.
Segmentation fault
I switched back to Fedora after a long time and wow a lot of things have changed! Fedora 12 is looking amazing and the best part is I could install it on my USB so easily. And then I found I couldnt open any PDF files on Fedora - I tried installing AdobeReader, xpdf and openoffice. All of them are just throwing some file format errors.... <I cant push a screenshot now since i removed the packages>
Initally i thought it might be some version conflict but it turned out I couldnt open any pdf's including docs from 5 years back to docs with embedded media content. I know I havent put any info here. I am looking for a little info on what is needed to get Acrobat/Xpdf working in Fedora 12... And I couldn't get any errors logged so I'd like a little help there if I need to share some debug messages...
that gave these messages [root@localhost Presentations]# evince module-development.mgp.pdf
** (evince:5768): WARNING **: Failed to create dbus proxy for org.gnome.SettingsDaemon: Could not get owner of name 'org.gnome.SettingsDaemon': no such name
Error: May not be a PDF file (continuing anyway)
Error: PDF file is damaged - attempting to reconstruct xref table...
Error: Couldn't find trailer dictionary
Error: Couldn't read xref table
When I run sudo apt-get update I get the following message at the bottom:
[Code]....
I have tried numerous ways to add the keys i.e: gpg --keyserver keyserver.ubuntu.com --recv-keys EF4186FE247510BE && gpg --export --armor EF4186FE247510BE | sudo apt-key add - However, I then get the following message:
[Code]....
I am using preupgrade to update Fedora 9 -> Fedora 12 following these steps: -
Code:
yum -y update
yum clean all
yum install preupgrade
preupgrade-cli
preupgrade-cli "<FEDORA VERSION>"
reboot
I successfully upgraded this box from Fedora 6 => Fedora 9 and I guess I got too confident when this worked without a hitch and went straight from Fedora 9 => Fedora 12. Everything works up until the very end of the upgrade process when I get this error.
Code:
(process:2227): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Parsing primary.xml error: Couldn't find end of Start Tag rpm:entry line 15303
[Code]...
Hello,
this error spams about 100 times, then the scanner does indeed work. So I'm not completely broken, but the error messages are of concern, and it slows down the process of scanning for the time it takes to do the messages.
Error in console:
libusb couldn't open USB device /dev/bus/usb/001/001: Permission denied. libusb requires write access to USB device nodes.
my sript runs:
scanimage
--device $MODEL
--resolution=$RESOLUTION
-x 5104 -y 6840
my groups:
uid=1000(fogie) gid=100(users) groups=100(users),7(lp),11(floppy),12(mail),15(man),17(audio),18(video),19(cdrom),20(games),21(sloca te),83(plugdev),84(power),86(netdev),93(scanner)
Even a simple:
scanimage -Lv
in console gives this on a separate --current pc as well.
My problem is that I am unable to do a routine upgrade of packages. When I try to perform an upgrade, the following occurs:
Code:
$ sudo aptitude dist-upgrade
Reading package lists... Done
Building dependency tree
[code]....
If I try to install another package, I get the following message:
Code:
E: I wasn't able to locate file for the tzdata-java package. This might mean you need to manually fix this package.
E: I wasn't able to locate file for the tzdata-java package. This might mean you need to manually fix this package.
E: Internal error: couldn't generate list of packages to download
i found in some thread that Swap space wasnt really necessary for RAM of over 1 GB, and true to it, i wasnt using using much of my 4GB allocated for swap ever so i deleted it ( dunno if it was wise, but didnt face any problems when i first deleted). today, i found out from another thread on a way to extend the size of /home directory if it was on a seperate mountpoint, and if space was available on my hard disk.
i just had 1 GB allocated to home directory and it used to fill up quite rapidly (due to cache from google chrome). I made a backup of my home directory contents, and i deleted the /home partition through the Disk utility. Somehow i couldnt combine the two unallocated spaces under a single partition why is that? (My plan was to combine that 1GB and the 4GB from the earlier swap space to use a 5GB home partition.) then i restarted and ever since i have been seeing the Grub error,and am not able to access my operating systems normally. GRUB Loading stage 1.5 Grub loading, please wait Error 15 . i am attaching the results.txt from my system obtained by booting through a liveCD. Something tells me that the way ive been following has been a roundabout one or a very inefficient one. how can i restore my system to normalcy
FC11/KDE-live Cd
The error is below;
apic is getting timing mode sailed. IO apic resources couldn't be allocated
I fed the kernel commands, noapic , noioapic but that didn't work .
I'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
View 6 Replies View Related