Downloaded and installed Alien Bob's Audacity package for Slackware64 13.1, butit wouldn't run and came back with error that it can't find libSoundTouch.so.1.So, I downloaded, built, and installed the SlackBuild for SoundTouch.Audacity still says it can't find libSoundTouch.so.1.
View 5 Repliesafter update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
I'm trying to get my work's infrastructure built at home before I go up there and show the boss. It is as follows: VMware esxi installed on the server with:
Windows server 2008
Ubuntu 10.04 server
I've got VMware installed. And I have spent the past 7 hours trying to figure out how to manage it. I found out that vsphere has not nor will ever be supported for Linux; which was my first problem.
Second Problem So I had to dig around for a spare Windows 7 dvd. To my UN-surprise it blue screened before it even got to the Windows installer.
Third Problem So I dug around for my Windows XP disc. Wouldn't find my sata hard drive and I wasn't about to dig around for a floppy drive and disk, in order to install it.
Fourth Problem I remembered that I had a dual boot of Windows 7 downstairs and proceeded to download and install vsphere. It wouldn't install because of some updates that needed to be installed. I installed them and got vsphere installed as well. However upon connecting to my vmware esxi, there was yet another error that had to do with some update. I found out that the error had been existent since 2009 and for some reason NO ONE at VMware has fixed it....
i have a problem in my notebook, its can make a sound i use the slackware 13 edition for my notebook i have upgraded my alsa-base on my laptop to alsa 1.0.22 on my slackware 13. i have follow the instruction tu active my sound device with command:
#alsaconf
#alsamixer
#alsactl store
but, the sound still wouldn't active, this is the result of my lspci -v on my slackware 13 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev
[Code]...
I'm trying to get M-Dist v0.1 to work but I'm having problems booting up the iso. This version is based on Slackware 9.1.From what I can see before the error is this output:
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 3107k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
[code]....
I am tired, and I simply can't find an easy answer.So, today I need the scanner in slackware64 13.1, only to find that it does not work as user. I have an HP Deskjet F2180 and using CUPS it is identified as hp:/usb/Deskjet_F2100_series?serial=CN81H4S2SP04TK.In the past the simple solution was to add oneself to the right groups, but it does not work this time.As user I get:
Code:
bash-4.1$ sane-find-scanner
...
[code]...
I have just installed Slackware 13.1 32bit. My hardware is a P-4 3Ghz with a gig of ram. Intel on board graphic and sound.
This is the best implementation of Kde I have used so far. Slack 13.1 is amazing. The install went very well and everything we configured properly.
My problem is when I start Kde or try to shut dowm or logout I get the same error for knotify: Unable to use the Xine Multimedia Backend:Could not find plugin 'Xine' for application 'Knotify'
I get this same error with the application name at the end of it. If I open amarok I get the same error message with amarok at the end. If I try to click a misic file in dolphin same error message.
When I try to shut down or log out from menu I get the xine error and nothing happens. The only way I can log out is Ctrl+Alt+Backspace to get to the KDM log in screen and then I am able to shut down from the menu.
I have been looking on the forum and using google but have found nothing useful.
The error pops up when I try to play a cd or music on the hard drive.
Today i download cheops source code and when i type ./configure returns me this error :
Quote:
checking for gnome-config... no checking for gnomeConf.sh file in /usr/local/lib... not found configure: error: Could not find the gnomeConf.sh file that is generated by gnome-libs install Is there any way to install cheops in KDE ? Do you know any solution for this problem ?
I have a Slackware 13.1/64-current system running the 2.6.35.6 kernel that I have installed the most recent nvidia drivers for (as of yesterday or day before) 260.19.12. If I boot up into run level 4 after running nvidia-xconfig in a console and run glxinfo as root I get:
Quote:
bash-4.1# glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
If I edit /etc/profile or /home/username/.bash_profile and add the following:
Quote:
export LIBGL_ALWAYS_INDIRECT=X
I have set both X=0 and X=1 as reported by [URL] I get the screen of information except it says
Quote:
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
my lspci -v for the graphics card looks like this:
05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device 2353
Flags: bus master, fast devsel, latency 0, IRQ 16
[code]....
I am sure I missing something from my xorg.conf but at this point I am not sure what I have been searching on this for days to no avail. From the log the only thing that looks like is a problem is it doesn't load the keyboard and mouse but it gets loaded later on in the file.
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
When i install the Authen:Pam module it gives me the same error that i get when i install cyrus sasl2 . So it basically looks like u have to fix the perl module error first how can
[Code]....
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies View Relatedtrying to install gnucash 2.2.9 from SlackBuilds. I have the current versions of slib and guile installed (slib from slackbuilds and guile from slackware). when installing slib I get the following:
Executing install script for slib-3b2-i486-2_SBo.tgz.
ERROR: In procedure primitive-load-path:
ERROR: Unable to find file "slib/guile.init" in load path
Package slib-3b2-i486-2_SBo.tgz installed.
Slib is installed. Try to run gnucash and I get the following: gnc.bin-Message: main: binreloc relocation support was disabled at configure time.
ERROR: In procedure primitive-load-path: ERROR: Unable to find file "slib/guile.init" in load path guile.init is in usr/lib/slib as it should be. I'm lost - where should I look next?
I'm running Slack 13.1 [32 bit] Re: pdfedit from SlackBuilds 13.1. I've installed qt3 per the dependencies w/installpkg. I've pointed pdfedit.SlackBuilds to where qt3 is and it's found fine. The problem arises when the build can't find docbook stylesheets. "checking for docbook xsl... configure: error: unable to find docbook.xsl stylesheet"
I've installed docbook.xsl where it can be found which is in the same folder qt3 support is found and verified my system can find it there,, which it does. I still get the can't find stylesheet error. Is this a glitch or am I overlooking something somewhere along the line?
Now i have 64 bit computer i installed Slackware 23 64 bit on it. i followed Alien Bob's multi lib how to and installed needed libraries one by one. everything is fine expect wine configure script can not find some libraries needed: libgsm, libmpg123, libopenal, libxcomposite.
I have already installed 32 bit compatibility packages and used /etc/profile.d/32bit.sh as recommended in Alien Bob's howto. configure -- does not really list anything for pointing for libraries.
I am using the latest UBUNTU 9.10. It was working great. I logged in as Tom, put in my password and could do what I needed to do. Now when I go to the CLI through the terminal I get "Tom@new-host-2:~$ " which has no privileges. I obviously messed up something. I can't find a way to get back to my original prompt when I access the terminal.
View 5 Replies View RelatedChanged my shell to zsh and somewhere along the way lost dircolors. When I type ls I get directories, files, symlinks, etc., in colour but when I tab to autocomplete commands in the shell the colours have disappeared. Not sure what I've done because I've been experimenting with rxvt-unicode as well, at the same time. If it's any use echo $TERM gives me rxvt-unicode-256color. Exporting $TERM as xterm gives the same result, i.e, no colours.I've tried the following:
Code:
cat /etc/DIR_COLORS > ~/.dircolors
As I say, for some reason ls does bring up files in colour, but tabbing to autocomplete
[code]....
Following the premature announcement earlier today that prisoner number 13.37, aka "Slackware", has been released, the authorities would like to make it clear that no such release has taken place. Prisoner # 13.37 remains in detention and will only be released when his sentence has been served. You may let your children back out to play again now
View 7 Replies View RelatedI've got a setup where I need to use 'find' to find 0 or more files in a certain directory, however, 'find' always produces an error when there are no files that match a certain check. Is it possible to run 'find' while having it omit errors when no files match the pattern?
View 2 Replies View Relatedafter install slackware with gnome using gnome slack build it is work fine Except some thing :-
the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.
No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))
Somehow gedit went ahead and modified its hotkeys to have save be nothing, and control s be find. How to get save back?
View 4 Replies View RelatedI was playing around with the default panel that has the power icon (wrong lingo maybe) and the network/sound icons, etc.I deleted some items including the power icon and now for the life of me can't find it in the panel applets list in lubuntu.Is there a way to restore the default panel with the settings as when I first installed lubuntu.I also played with some spacings and other settings so would rather just get it back to normal/restore it vs add all the items back on and then play with the spacings again.
View 9 Replies View RelatedI want to move all files and directories that are 1 month old out to back up into a separate folder. There will be a lot of files and I want to make sure it copies properly. The problem I'm having is integrating a MD5SUM into it to check integrity. MD5SUM is not recursive, so I figured it would work in a loop when it copies each individual file, I'll do a md5sum on each file and delete that md5 once its verified it copied ok.
[Code]...
I also need some sort of error handling to output all md5's that didnt pass the hash check.
Like others here it seems I had problems with the latest -current. I can't startx, no sound, etc. I put back the video drivers and such from the 13 CD but now have a bunch of other issues, video will flash every now and then and sometimes go blank so I can only reboot as exiting xwindows and going back in its still blank. I tried booting from the 13 cd and reinstalling without formatting my root partition but that dies in the kde games for some reason and setup won't start again. I was trying to not format and loose all the updates just put back 13 but that doesn't seem to be working.
View 11 Replies View RelatedI have a not yet encountered issue on my server tonight, this is weird as it seems it sounds like an old issue, but I didn't noticed that before (I always have a "task monitor" or "top" running somewhere)[URL]gam_server is taking "full cpu" (or 100% of one of my core),without anything special done from me, but the latest update to current...Does anybody had this behavior too ?I understand there are some way to sort that, but I was curious why is that thing is appearing in a 'vanilla' configuration... Isn't it weird somehow ?
PS/ I had nfs shares in my fstab, that I had to remove because as they're not always present, that was blocking for several minutes at boot time... It was not a big issue as those shares were not vital, yet it's unpleasant. The only thing I saw on the changelog was a "nfs-utils" update, maybe it's related ? Maybe the default "timeout" have been changed ?
I subscribe to DropBox and save all my important data in my /home/DropBox folder which, I presume, is living on my /home partition (/dev/sda3). I was hoping that I could create a new partition (/dev/sda4), 'move' my DropBox folder to this new partition so that when I use Clonezilla to make my back up images (/dev/sda1 & /dev/sda3) it would take much less time and space.
View 2 Replies View RelatedAll my panels and desktop and wallpaper disappeared. I don't know how to get them back without restarting KDE4. I have too many things open. I can't right click the desktop > appearance settings and I don't know what to input into alt+F2 to get that system settings menu. Any ideas?
View 1 Replies View RelatedRunning Slackware64 13.1 here. I started up Firefox this morning and all the text is completely blank - all the menus have disappeared and everything. I can't really think of a great way to explain it clearly so I've attached screen grabs of Firefox and Thunderbird (which has the same problem). Other GTK apps seem to be fine, it's just the Mozillas as far as I can tell.
I have tried removing both with code...
And then I reinstalled both Firefox and Thunderbird from .txz files I downloaded from a repository, but they're still the same. Firefox version is 3.6.3 and Thunderbird is 3.0.4.
After falling out with KDE4.2.4 and using fluxbox for a while, I was sufficiently impressed with my experiments with KDE4.4.3 in slackware 13.1 that I decided to go back to KDE. In particular I'm keen to use plasma netbook on my eee pc 1000H.
But I've hit an annoying snag. The problem is that if I set it to use plasma netbook (System settings>Desktop>Workspace>Form factor>Netbook) it works just fine for the rest of that session but next time I startx it goes back to the Desktop form factor.
The strange thing is that this didn't used to happen, it only started recently and to the best of my knowledge I haven't made any other significant changes or updates to the system. I tried removing the ~/.kde dir and letting kde setup from scratch but that didn't help.
I looked at the /etc/rc.d/rc.inet1.conf file it says something completely diff than the iwconfig. iwconfig is saying there is no wireless extensions on lo and eth1 but on eth0 all my info is there now on the conf file it says and ip address on eth2 and nothing on eth 0, or 1. does anybody know why it keeps jumping back and forth? one week its eth0 and maybe 2 months from now its eth1.
View 11 Replies View Related