When i install the Authen:Pam module it gives me the same error that i get when i install cyrus sasl2 . So it basically looks like u have to fix the perl module error first how can
[Code]....
I am trying to compile a new version of Mapserver on my fedora7 system and after 'make' I get the following error:
/usr/bin/ld: cannot find -lpam
collect2: ld returned 1 exit status
make: *** [shp2img] Error 1
libpam is definitely on the system.
# locate libpam
/etc/ld.so.conf.d/libpam.conf
/lib/libpam.so.0
/lib/libpam.so.0.81.6
[code]....
All with no success (same error is repeated)
Today i download cheops source code and when i type ./configure returns me this error :
Quote:
checking for gnome-config... no checking for gnomeConf.sh file in /usr/local/lib... not found configure: error: Could not find the gnomeConf.sh file that is generated by gnome-libs install Is there any way to install cheops in KDE ? Do you know any solution for this problem ?
I'd like to mount an iso file ,however, it failed as following: ljk@ljk-laptop:~/Test$ modinfo loop ERROR: modinfo: could not find module loop what I can do?
View 1 Replies View RelatedHaving not used Clive in over a year I went over to [URL]... and downloaded, built, and installed both Clive and URLgrabber. Here is error message when I tried to run Clive,
[code]...
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
I'm having some troubles with nfsd in slackware-current. When I start the service, I get the following error messages: Quote:
WARNING: Error inserting sunrpc (/lib/modules/2.6.33-smp/kernel/net/sunrpc/sunrpc.ko): Invalid module format
WARNING: Error inserting auth_rpcgss (/lib/modules/2.6.33-smp/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko): Invalid module format
WARNING: Error inserting lockd (/lib/modules/2.6.33-smp/kernel/fs/lockd/lockd.ko): Invalid module format
FATAL: Error inserting nfsd (/lib/modules/2.6.33-smp/kernel/fs/nfsd/nfsd.ko): Invalid module format
The mount fails from the clients with the error message: Quote: mount.nfs: access denied by server while mounting jupiter:/media/Backup A look at syslog from the server side gives: Quote: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel) mountd[28198]: getfh failed: No such device kernel: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
I've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.
Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.
I've been trying to install module em28xx in a Slackware 12.0 installation that has been operating for several years. This is the em28xx that is part of the Slackware 12.0 distribution itself (kernel 2.6.21.5).
Unfortunately, although em28xx is fine, modprobe has a problem with dependent module i2c-core, which is generating an "Invalid module format" message. The system is using the generic Slackware 12.0 kernel, not the huge kernel.
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
After installing ncl 2 sp2, I restarted my computer. Now when I try to login I am getting the following error:Module is unknown. I am running openSuse 11.2 64-bit.
View 2 Replies View RelatedI've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
View 5 Replies View RelatedI'm trying to get M-Dist v0.1 to work but I'm having problems booting up the iso. This version is based on Slackware 9.1.From what I can see before the error is this output:
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 3107k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
[code]....
I'm trying to install the ip_tables module on a xen vps without success.This is what I've done and the error message I'm receiving:
[peter@sql0 ~]$ uname -a
Linux sql0 2.6.18-128.4.1.el5xen #1 SMP Tue Aug 4 20:51:12 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
Downloaded and installed Alien Bob's Audacity package for Slackware64 13.1, butit wouldn't run and came back with error that it can't find libSoundTouch.so.1.So, I downloaded, built, and installed the SlackBuild for SoundTouch.Audacity still says it can't find libSoundTouch.so.1.
View 5 Replies View RelatedI am tired, and I simply can't find an easy answer.So, today I need the scanner in slackware64 13.1, only to find that it does not work as user. I have an HP Deskjet F2180 and using CUPS it is identified as hp:/usb/Deskjet_F2100_series?serial=CN81H4S2SP04TK.In the past the simple solution was to add oneself to the right groups, but it does not work this time.As user I get:
Code:
bash-4.1$ sane-find-scanner
...
[code]...
I have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.
View 9 Replies View RelatedOur Sled 10.1 server is running as a VM on VSpher 4. After a power outage we can not log into the server we get the Error in Module message. I can however disable the nic card for the server in the vm console and the system logs in with no problem.
View 2 Replies View RelatedI tried to install NVIDIA audio drivers on fc10 (2.6.27.41-170.2.117.fc10.i686).
It ended up in this error.
I am attaching nforce-installer log for your details.
Code:
By default I can use internet (without network drivers installed), how is this possible? And why not audio?
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
while booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.
View 2 Replies View RelatedIs it possible to install new slax module (from slax site) on ancient backtrack 2? Or it won't work because of versions? I would like to update tor by installing this module on bt2:
http://www.slax.org/modules.php?action=detail&id=2277
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
I have a Slackware 13.1/64-current system running the 2.6.35.6 kernel that I have installed the most recent nvidia drivers for (as of yesterday or day before) 260.19.12. If I boot up into run level 4 after running nvidia-xconfig in a console and run glxinfo as root I get:
Quote:
bash-4.1# glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
If I edit /etc/profile or /home/username/.bash_profile and add the following:
Quote:
export LIBGL_ALWAYS_INDIRECT=X
I have set both X=0 and X=1 as reported by [URL] I get the screen of information except it says
Quote:
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
my lspci -v for the graphics card looks like this:
05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device 2353
Flags: bus master, fast devsel, latency 0, IRQ 16
[code]....
I am sure I missing something from my xorg.conf but at this point I am not sure what I have been searching on this for days to no avail. From the log the only thing that looks like is a problem is it doesn't load the keyboard and mouse but it gets loaded later on in the file.
I'm a new user of Slackware Linux.I wan't to learn c# under Linux, so I downloaded Mono 2.8.1 source package. I read the README and downloaded the pkg-config, libgdiplus, glib-2.4.0 and install successfully.
But when I "make install" mono, make told me "[MCS] Can't find gmcs.exe", I don't know why.
I need handbrake software so badly so I went to alien's slackbuild to download the handbrake.However,it ends with error after compiling-
Does it mean i miss something of gtk?
OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
I'm trying to install Apache2::Request module (from CPAN.org) and in shell there is such messages: I'm using openSUSE 11.1, Perl 5.8
[Code]...
I'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..
I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:
[Code]....