I am using the latest UBUNTU 9.10. It was working great. I logged in as Tom, put in my password and could do what I needed to do. Now when I go to the CLI through the terminal I get "Tom@new-host-2:~$ " which has no privileges. I obviously messed up something. I can't find a way to get back to my original prompt when I access the terminal.
View 5 Repliesubuntu one takes like 30s to start all of the sudden (it used to be almost instantaneous on log in). This is an issue for two reasons: first is the fact that system performance is drastically compromised while ubuntuone-syncdaemon starts since it is accessing the disk as much as it absolutely can, which means that other programs also take forever to launch; second, when it finally does start, I am prompted to unlock the keyring, which interrupts whatever I am doing in a fairly annoying fashion and prevents the screen from locking properly if the computer is suspended.
While ubuntuone-syncdaemon is taking its merry time to launch, the status of the process is "uninterruptable," and an entire processing core is used at 100% with IOwait, as it is furiously accessing the hard drive.Is their any way I can get u1 back to original, unobtrusive self? Could this be indicative of a hard drive issue.
I wanted to change the resolution of the splash screen because it looked too big for the screen's area. I installed Start-up Manager, which I don't like any more because of this issue, and changed the resolution. The result was a garbled screen and so I reset to the original settings and re-booted. Now I have another garbled screen with 2 side-by-side very fuzzy/unreadable "Ubuntu" images.
View 9 Replies View RelatedI had download ubuntu netbook 10.04 version and use it from booting by USB key. I found it quite useful from USB and eventually installed it on my Gateway netbook, that's where my nightmare started. At installation option gave me to ubuntu side by side with my Windows Vista on the netbook. It used part of hard drive space to create a separate partition for ubuntu. Intallation is OK but display is very bad particular moving the mouse around Firefox. Screen turned white back ground right with messy character font. It tried move around and have to restart ubuntu to get out.
I thought it might be something display drive not setup but found no option to make change from within Ubuntu. I had frustrated to search for fixing option and decide to "remove" ubuntu from the netbook. The worst, there is no option whatsoever on how to remove it. I search this forum and script to delete the partition from terminal. When it restart, the MBR or Grun loaded with errors incorrect file system. That mean the MBR not load and it is a netbook. It does not come with Vista CD for me to fix MBR nor resize the partition. I had to re-install ubuntu again back to square one to use it size by size with Windows.
Any one have a clean and details steps on how to remove ubuntu, resize partition and able to bring the netbook back to Windows only?
I have upgraded to 10.10 and I want to go back to the font used in 10.04. What was the name of the font in Lucid? Moreover, how do I make Google Chrome adopt this change? It is currently rendering all the web-pages with the Ubuntu font and I want whatever 10.04 was using. If I change the font in the Appearance -> Fonts panel, Google Chrome does not update.
View 2 Replies View RelatedI want to change my computer back to its original self cause i have two computers in Ubuntu OS and i really just want one on it. My question is how can i change it back? I had Windows XP before ubuntu.
View 3 Replies View RelatedI recently had a problem in Ubuntu 11.04. I had just installed GNOME 3, however, I didn't really like it as much so I decided to go back using GNOME 2,but then a whole bunch of things happened. I tried re-installing GNOME 2,but then I lost the Ubuntu enviorment and stuck only with GNOME and now I'm only left with a terminal whenever I log in. how to restore Ubuntu 11.04 back to its original state, like as if it had a fresh installation?
View 7 Replies View RelatedI was trying out a theme from gnome-look (elegant gnome) and it had an option to change my gdm theme. I used it, did not like the look, but when I uninstalled it said there was no back-up. Now my gdm looks like something from windows 95! How can I reset it back to the original settings? I tried reinstalling GDM in synaptic but no change
View 3 Replies View RelatedI just did a fresh install from 8.04 to 10.04 with separate "/" and /home partitions. I really wanted a new 10.04 system to start from scratch and rebuild it again & differently. Instead I got a really messed up system. Is there any way to change it to a fresh new 10.04 install. That nothing has been added to yet?
This is very important because on 10.04 my video card won't handle all the mods that I had on 8.04 and my system freezes very soon after I log on.
When I first installed openSUSE 11.4 the /boot directory looked like this:
I had installed VirtualBox through Yast and decoded to delete. After deleting the /boot directory looked like this, pointing now to the desktop kernel.
I went into YAST and deleted all kernel entries that contained desktop, trying to get back to the original configuration.
After doing this, the /boot directory now looks like this.
Is there any way to get back to the original kernel configuration without having to do a complete installation?
I am using Ubuntu 9.10, I removed the task bar at the bottom of the screen and replaced it with a new one. The problem is when I click on Fire Fox and by default Fire Fox would drop to the bottom of the screen, now it just disappears. Is there any way of putting back the original settings.
View 1 Replies View RelatedSeems that i have totally ****ed up my sony vaio (vgn-fz21z). I've been doing some partitioning and formatting without really knowing what i was doing. Now it is a mess.The vaio comes with pre-installed windows vista, which is no longer installed. I want it to be.Ubuntu 10.4 is installed. In grub I can choose vista but that is only vaio recovery tool. Which is not working. When I try the format cption and take it all back to the original settings, it says that c: is too small or missing.
I also have some cd:s with windows 7 and xp on, but they can't be read. Now the vaio is not even accepting my ubuntu live-cd. I have nothing of importance on the computer, so there would be no problem re-formatting the whole thing. Can it be done? I would prefer is the vaio recovery tool could be left untouched, it has its own partition. I guess I'm asking: is there a way from inside ubuntu to make a total system re-installation, get rid of different partitions and reconstruct c:, so win can be installed again?
I had installed Ubuntu 10.10 on a W7 OS, as a dual boot. I have removed Ubuntu, and now have that space as "free space". Between the original partition (c:) and the free space, there is a partition that contains the laptop mfg's factory image. I want to recover that free space back to the original c: partition. I was reading about GParted, but do not want to attempt anything until I have some expert advice.
View 1 Replies View RelatedI have a laptop with 2 x different versions of Ubuntu installed as follows:
Ubuntu 10.10 on a partition; and
Ubuntu ultimate edition gamers (based on ubuntu 10.10 I believe).
I've only recently installed the gamers edition as a dual boot to see what it looks like. Now I've had a play around with it I've realised that I don;t really like it.What's the quickest/easiest way of reverting back to my original ubuntu 10.10 as a single boot? I don't want to re-install 10.10 - I was hoping I could delete the gamers edition to get back to my original single boot 10.10.
I have a Sony Vaio vgn-sz440. Here is what the specs say about the video card.
[code]...
I do not understand, do I have an Intel video card, or an Nvidia video card? Should I install the Nvidia video card driver, because every time I try, everything gets real glitchy and I revert back to my original setup.
I just installed the newest version of Ubuntu 10.10 with a dual boot with Windows 7. I like it, but I think I might need sound drivers. Flash content sounds seem to lag a lot, and it is kind of annoying. I am using an ASUS M2N68-AM SE2. I can't find the original CD. and even if I did have it, would it even work with Ubuntu? Where can I get a compatible version?
View 1 Replies View RelatedI have been upgrading Ubuntu as its new distributions are released every six months regularly since quite some time now. Is there a way I can find out which was the original installation version that I first installed after I formatted my disk. I mean as far as I remember I have been using this state of my Ubuntu since 8.04 and have been upgrading since then, but I am not sure.
View 4 Replies View RelatedInitially, I was trying to get around a Nautilus log in error. Using this, I was able to log in, but I entered what seems to be a perfectly clean version of Ubuntu...with no access to my files. [URL].... Now, I can't seem to find any of my original files. Some of the commands I entered in the terminal included:
[code]...
I'm afraid that I may have deleted the files, or have moved them to another user or someplace on the drive I can't see.
Is this a beta version or something? I installed this version because it came as a live cd coupled with emc2 for cnc machining. I cannot get anything to work correctly. I tried to install Mozilla thunderbird using the application manager and it is very slow. It takes forever for the menus to open. or emails and is virtually unusable. I tried to use the startup manager and it killed my grub bootloader so I needed to reinstall. I couldnt successfully use the grub2 console prompt to log back into linux even though I ollwed several tutorials for this. I tried to install the flash player plugin and it kept telling me still to install it before I could watch flash videos even though I had installed it 3 or 4 times. I just tried to install evolution mail and it cannot log into my gmail account. I tried to install swift dove which is a faster version of thunderbird and it says it is starting but then never does. I am reasonably sure I should hang in there as I have heard Ubuntu is very good as an os.
View 9 Replies View Relatedim following a tutorial to setup a dns server, after editing vi etc/sysconfig/syslog, i cant seem to save me changes or exit the screen to get back to a command prompt. have tried to google the answer to no avail, any ideas? also im using putty to ssh, is the answer the same as using the terminal directly?
View 2 Replies View RelatedWhen running a program that has infinite loops in the terminal , how to bring back the command prompt ? ( I'm using Fedora core 5 )
View 7 Replies View RelatedSo, I plugged in two hard drives to my server. I started with two, an IDE and an SATA. Then I plugged in another SATA and an external SATA using a PCI controller card.
I currently only have command prompt (Putty) access. How can I set the drives up to be usable. They were on another server that died.
I recently was given a system with an ASUS A8V motherboard, AMD Athlon 64 3000+ 1.8GHz CPU and one 60 GB SATA disk to which I added a 120GB IDE disk. As the disks are on different (built-in) controllers and are different speeds, I set up /boot, root and swap on the SATA disk, and then one big /home partition on the IDE drive, using the custom partitioning. If I install Fedora 15 32 bit (from DVD) with encryption enabled, I get prompted for the encryption passphrase during bootup as I would expect. If I install Fedora 15 64 bit (from DVD), I get that same prompt and the boot hangs. I can then bring up a serial console where I'll find a prompt for the same passphrase for the IDE drive. I can enter it and the boot will proceed.
I am now running F15 64 without encryption; I would like to get encryption working again but without having to enter the passphrase twice. Plus I figure that this *should* work the same under both the 64 and 32 bit versions. I have had to reinstall this system a few times, using both versions -- the behavior has been consistent.
I've set the following as my prompt:... can't post the string due to the 15 post rule. how helpful....
Everything looks fine initially.
1- It sets the username and host in back on green text.
2- It then changes to an off-white an prints the command number for the terminal.
3- Next, it prints the working directory.
4- Finally is prints a ">" character and a space. it looks like this (hostname/un edited & image enlarged slightly to make it easier to read.)
The problem occurs when I try to "up arrow" to reuse and/or edit a prior command. It prints the prior command fine, but if I arrow over to edit the command sometimes the first character can not be deleted from displaying
I'd love to post 2 screen-shots I took to show the problem but.. 15 posts?
When I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
I would really like to preserve a file's original modified date and pass it back to the file as the same attribute after a script has worked on it. I get a lot of JPEG files from different places on the Net which I either turn around and upload or burn to disk, and having the "original" date of either download or last mod in a graphics app would be for me, in the long run, a lot more helpful when deciding, for instance, which files to "recycle" or pass on backing up more than once.I've tried doing this on my own every now and then. Where I run into problems is that it appears "stat" and "date" use different formats for date information, and I can't seem to puzzle out how to "translate" one to the other satisfactorily for the latter command.
Just to give an example:
stat foo.jpg |grep Modify gives me
Modify: 2010-07-12 06:28:56.890625000 -0400
Passing that string as-is to date foo.jpg, I get the errordate: unknown option -- 0 and the usual semi-courteous suggestion to Try 'date --help' for more information.Somehow my TexInfo database got screwed up somewhere along the line and info dategives me the short article on date input formats, not the full documentation for the command
I was playing around with the default panel that has the power icon (wrong lingo maybe) and the network/sound icons, etc.I deleted some items including the power icon and now for the life of me can't find it in the panel applets list in lubuntu.Is there a way to restore the default panel with the settings as when I first installed lubuntu.I also played with some spacings and other settings so would rather just get it back to normal/restore it vs add all the items back on and then play with the spacings again.
View 9 Replies View RelatedDownloaded and installed Alien Bob's Audacity package for Slackware64 13.1, butit wouldn't run and came back with error that it can't find libSoundTouch.so.1.So, I downloaded, built, and installed the SlackBuild for SoundTouch.Audacity still says it can't find libSoundTouch.so.1.
View 5 Replies View RelatedI've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
I'm running Red Hat Linux 5.4 on HP DL580 server with 16 processors and 64 GB of RAM. I'm connecting to the server remotely through SSH. after entering the password, it takes time to return the command line, if I click ctrl+c during this time, I'll have the command line prompt but not the correct bash prompt (I have to run bash to pass to my correct prompt).I tried to install Apache on the server, ./configure took 4 hours to finish instead of 1 or two minutes, Oracle installation same behavior. Server Disks are mirrored using RAID controller.
View 6 Replies View Related