I installed slack 13 from disk 1, and then went ahead and installed the missing sets using slapt-get (t,tcl,x,xap and y). I skipped the kde and kdei sets. When I start xfce, the fonts are all messed up as shown in the attachment.
View 2 RepliesI wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies View RelatedI've been using Eric's KDE packages since last June or so, and have been using the same command the whole time to download them. But today I went to get KDE 4.4.5 for the fresh 13.1 install I just did on my wife's laptop and KDE 4.4.85 (hell, yeah!) for my -current box. In both cases the command returned the same error. Here's the command and error message on my -current machine:
Code:
gene@lemon:~$ rsync -av --progress rsync://alien.slackbook.org/ktown/4.5.85 .
@ERROR: Unknown module 'ktown'
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
I have 4 1GB memory modules in my AMD64 X2, and Slackware 64-13.1 'free' tells me I only have 3.7GB. Never heard of this problem on a 64bit system.
View 6 Replies View RelatedI want to use Courier New font in my gvim editor. I am using Slackware 13.In my present .gvimrc i have:-
set gfn=Bitstream Vera Sans Mono 13
But now i wish to change the font to Courier New. From what i have read this is a Microsoft font, so is there a way that i could get it into Slackware 13?
I found out that an installation of Redhat already has that font and when i do set gfn=Courier New 13 in my .gvimrc in Redhat, the fonts are available(which is not so in Slackware 13)
Before i would to say sorry because my bad English,
i have install slackware 13.1 with no problem,but the problem is that i reboot after finish install.
in the middle it's stop booting and can't continue...
I'm not sure how you do it, but it seems like you should be able to. How do you upgrade the version to 13 without burning a new CD? I just used slackpkg update, slackpkg upgrade-all, but when I tried install-new it had nothing to do.
View 5 Replies View RelatedI have just installed Slackware 13.37. After the install - when executing startx for the first time, the xfce desktop freezes when its almost (?) fully loaded.
While loading I can move mouse and if I hit caps_lock the lamp at the keyboard turns on and off.
In the setup I choosed to use vesa - allthoug I afterr that even tried to boot from lilo into vga-mode.
I am, a litle rusty after have been brainwashed through Ubuntu for a few years (sigh) - so I really am not sure which config-file I should edit, and xorg.conf seems to be empty.
An error accoured during the root filesystem check.
Installed fresh Slack 13.0 version, at 7GB virtual hdd, with cfdisk, created two primary partitions, 500 mb for swap, whats left, to second partition, made it bootable, installed full software package, used all default selections, only refused to configure network. At first restart, I got a screen with many statements, that looks like errors, and a last one, that looks like critical error.
An image I have been working on Windows my whole life and only worked with already installed linux systems a bit. Installed RedHat and FreeBSD on VirtualPC previously and succesfully. Now, I stumble upon this error and cant think of next step.
I just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
I just did a fresh install of Slackware 13.1:
However, I get 4 grub listings for Slackware.
1. leads to kernel panic.
Code:
2. leads to kernel panic but with
Code:
3.... welcome to Linux 2.6.33.4 (tty1)
4. Welcom to Linux 2.6.33.4-smp (tty1)
I have never had any trouble with grub, and consequently never had to edit much in grub.
Just tried to install gnucash on a fresh install of 13.37. ALL dependencies are installed, with no errors from any. The gnucash slackbuild dies with a message that says "gnome.h, no such file or directory". All I can find is that it is and very old dependency of gnome.
View 9 Replies View RelatedAny kde app(dolphin, device notifier...) can't see my internal drive with ntfs and any connected flash drive. I've thought that this is problem with missing dependecies or hal but 'lshal -m' shows messages when J connect flash drive so i don't know where the problem is. I've installed all required and recommended and some optional packages from URL...and it has no effect. Does anybody know what i have to do to make it work.
View 2 Replies View RelatedEssentially I have found this guide, but it is for miktex, i need a guide for texlive on Debian/Ubuntu which will not pollute dpkg installed texmf.
I'm interested in converting TrueType font to be usable in (pdf)(La)TeX.
All the power google turn up just stuff f relating how to install microsoft fonts or do stuf on MikTeX.
I CANNOT USE XeLaTeX!!! I use pstricks and the font must be available in plain TeX! Otherwise my document looks inconsistent!
installed a couple things with Winetricks and it told me to uninstall the Samyak/Oriya font because it causes problems with some .net applications. It told me to use
Code:
But I'm not sure if I should install dpkg specifically to do this, or if there's a native slackware way to remove this.
i have upgraded my desktop from 13.0 to 13.1 and the font rendering suffered big time (did the same procedure on the laptop but no problems there). anyway, the fonts on kdm are really bad as well as konsole and firefox. other qt apps don't seem too bad but should be much better. xterm and xmobar don't seem to be affected at all. the machine is running the 13.1 sbo of nvidia drivers.
i have tried a few things: playing with the anti-aliasing settings in kde control center (all the settings offered differnet level of 'badness' and no 'goodness') and trying to use the settings in the nvidia control panel but that didn't seem to have any effect.
Adobe Reader ain't available for 64-bit so I'm stuck with XPDF (or Okular, which is better than XPDF) and most stuff won't print worth a hoot. I've been reading the manual pages and somewhere or other I'm missing some thing about adding font paths (or replacing the default font paths). I have the complete Adobe Type Library plus TTF's installed in /usr/local/share/fonts (and they work just fine with OpenOffice.org) but I can't seem to figure out how to get them or the Slackware-provided fonts available to XPDF.
View 3 Replies View RelatedI've installed some custom programming fonts, namely Speedy.pcf. Its a .pcf, so I just coped it into /usr/share/fonts/misc, and ran mkfontscale, mkfontdir. I can use the font fine in 'xfontsel' and 'urxvt', but when GTK2 tries to render this font. its not even the same font, its just using some default font.
View 3 Replies View RelatedIs it just me or does the font rendering in Slackware64 13.37 look bad? It reminds me of the bad old days of having to recompile freetype with the then-patent-encumbered option to make the fonts look decent. When I print, everything looks normal. On screen it doesn't look right. I don't really know how to describe it other than it how things used to change after a freetype recompile. Is there anything major that changed between 13.1 and 13.37 WRT fonts in KDE, X, or freetype for that matter? FWIW, I did a clean install with a new .kde instead of using the old one.
View 14 Replies View RelatedWhen I run xload, it gives the following:
Code:
xload
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found
It's an up-to-date Slackware64 current, with only ruby and poppler downgraded to 13.0, but I don't think either would do it.
It's not a big deal, but I wonder if it might be a sign of some bigger problem.
I'm running slackware 13.37 and when looking through the x.org log I see that two directories are missing:
Information[ 68.572] (WW) The directory "/usr/share/fonts/local" does not exist.
Information[ 68.572] Entry deleted from font path.
Information[ 68.572] (WW) The directory "/usr/share/fonts/CID" does not exist.
[code]....
I was using UBUNTU and still do, but I dual boot UBUNTU/Slackware now and my Linux knowledge has increased so much. This forum has been right there with me for the last couple weeks and I was reticent to post a question until a knew I had exhausted the available sources. So here goes.....Can I change the font size of the system shell that begins at startup (with the boot info and stuff). I really like using this shell as user. The thing that would make me nuts for it is if I can make the text a bit smaller. I have a 1920x1200 display and could really take advantage of all of that "real estate." The other posts related to this seem to focus an a broken configuration from the beginning, but my install is SWEET. Can I change this or is it baked into the system?
View 11 Replies View RelatedUpdated from KDE 4.3.5, saw memory consumption dropped a little bit, speed increased by a few percent. But when I added a widget to the panel, I could not see the widget. And when I double-clicked the same widget in the widget list (intending to remove it -- if it is a T' flip-flop), the widget was still on the panel, alive, and hidden.
Then I gave up, and wanted to change the font for the digital clock, and KDE was frozen. Ctrl-Alt-Backspace worked, fortunately. I think for my workshop presentation next week, I'd better use xfce.
How do I increase the font size on a tty. I have googled it and still don't have a Slackware way of doing it. What /etc file needs to be edited?
View 1 Replies View RelatedAfter installing libre3.3.2 using the Slackbuild scripts, I found that it displayed fonts correctly, but doesn't print the same font on the printer. The output of the printer should be Arial, but is instead some elongated, overlapping mess.
The same Slackware package installed on SW13.1 prints normally. (Same computer, different partition)
Spadmin used to control the printer fonts, but apparently not anymore.
System: Linux nadrek 2.6.37.6-smp #2 SMP Sat Apr 9 23:39:07 CDT 2011 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ AuthenticAMD GNU/Linux.
Most of my work happens in a terminal, so I need a clear, readable font. I've settled a while ago on Terminus [URL]..., which works wonders for me. I added XTerm*faceName : Terminus in my ~/.Xdefaults, and I do get the Terminus font. Unfortunately, a lot of Unicode glyphs are missing (mathematical symbols, greek and hebrew letters), displaying as little square blocks instead.
If I remove the faceName entry, the default configuration seems able to display most of the glyphs (including math, greek, hebrew, runic, and whatever else), but the default font is much harder to read.
A google search hints that it should be possible to use Terminus as the default font, and fallback to (an)other one(s) for missing glyphs, but provides no further explanation. I've seen documentation that recommends Bitstream Vera Sans as a fallback, but it lacks the glyphs I need too; I don't know how to identify the default font used by xterm either, I had a look at /usr/share/X11/app-defaults/XTerm, but all I can find are generic references to old pre-fontconfig font names.
Using Gentoo Linux, fontconfig and xterm are up to date, USEs trutype and unicode enabled, X.Org server 1.6.
Edit: I alternate between Ratpoison, Awesome and XMonad, without a desktop environment.
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View RelatedI ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
I am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?
View 4 Replies View Related