Slackware :: Add Font Paths To XPDF?
Mar 12, 2010
Adobe Reader ain't available for 64-bit so I'm stuck with XPDF (or Okular, which is better than XPDF) and most stuff won't print worth a hoot. I've been reading the manual pages and somewhere or other I'm missing some thing about adding font paths (or replacing the default font paths). I have the complete Adobe Type Library plus TTF's installed in /usr/local/share/fonts (and they work just fine with OpenOffice.org) but I can't seem to figure out how to get them or the Slackware-provided fonts available to XPDF.
View 3 Replies
ADVERTISEMENT
Nov 14, 2010
I'm gonna tell you about slackware installation on my notebook, an acer travelmate 800lci.
On this notebook, I successfully installed (and work with) slackware from version 10.0 till the recent 13.0. Upgrading to a new version till using a new internal hard disk (from 40 GB to 160 GB). After upgrade I fully reinstall slackware 12.2 and then upgrade to 13.0.
Now, I had to use the notebook for testing, so I made a new full installation of slackware 13.0 and after some time a new full installation of slackware 13.1.
On this disk (160 GB P-ATA) I have to pass the following parameter to the kernel:
during installation and boot.
This operation solve the issue that can "see" the full size of the disk (160 GB) and not the 137 GB limit.
Only using slackware 13.1, occur a big (for me) problem.
I can fully reproduce it opening any pdf document with xpdf: moving into document with arrow keys make the cpu goes to 100% and page "fault/s" goes from 30 to 8000 and some times 15000 "fault/s". So, xpdf becomes unusable. This problem reflects in similar manner to other software, like firefox.
Here is my question: what type of analisys could I try to solve/analyze this issue? Maybe the kernel, xorg?
On slackware 13.0 all works perfectly.
View 14 Replies
View Related
Oct 23, 2010
I am currently using slackware-current with fluxbox is my window manager. I aim to have a light weight environment. But xpdf renders pdf very slowly. Are there any one having this issue before. As alternative, i have to install wine and use Sumatra PDF.
View 12 Replies
View Related
May 10, 2011
I'm the only person seeing this: xpdf is slow to render PDFs and navigating through a document is ponderous. The problem is there on my laptop ( Core i3 ) and my desktop ( Core i7 ). I played with the ./configure options in the Slackbuild and deleting the -mtune=i686 option made it much more responsive. It's so bad I've got Debian on a separate partition and I boot into that if I need to look at PDFs.
View 14 Replies
View Related
Jun 13, 2011
Start xpdf or gv. Click an xterm to be active and slide it over xpdf/gv. Vertical lines from xpdf/gv under the xterm stick to the xterm window above and make it unreadable.
The problem does NOT show with KDE default settings with display effects on but does show in fvwm, xfce etc, and in KDE without effects.
On a system with a Sandy Bridge integrated graphics (i5-2400) the problem went away by downgrading to xf86-video-intel-2.13.0. But it was not enough for another system with 945G which needed downgrading to xf86-video-intel-2.12.0.
View 3 Replies
View Related
Nov 21, 2010
installed a couple things with Winetricks and it told me to uninstall the Samyak/Oriya font because it causes problems with some .net applications. It told me to use
Code:
But I'm not sure if I should install dpkg specifically to do this, or if there's a native slackware way to remove this.
View 3 Replies
View Related
Jun 4, 2010
i have upgraded my desktop from 13.0 to 13.1 and the font rendering suffered big time (did the same procedure on the laptop but no problems there). anyway, the fonts on kdm are really bad as well as konsole and firefox. other qt apps don't seem too bad but should be much better. xterm and xmobar don't seem to be affected at all. the machine is running the 13.1 sbo of nvidia drivers.
i have tried a few things: playing with the anti-aliasing settings in kde control center (all the settings offered differnet level of 'badness' and no 'goodness') and trying to use the settings in the nvidia control panel but that didn't seem to have any effect.
View 1 Replies
View Related
Jan 25, 2010
I installed slack 13 from disk 1, and then went ahead and installed the missing sets using slapt-get (t,tcl,x,xap and y). I skipped the kde and kdei sets. When I start xfce, the fonts are all messed up as shown in the attachment.
View 2 Replies
View Related
Apr 8, 2010
I want to use Courier New font in my gvim editor. I am using Slackware 13.In my present .gvimrc i have:-
set gfn=Bitstream Vera Sans Mono 13
But now i wish to change the font to Courier New. From what i have read this is a Microsoft font, so is there a way that i could get it into Slackware 13?
I found out that an installation of Redhat already has that font and when i do set gfn=Courier New 13 in my .gvimrc in Redhat, the fonts are available(which is not so in Slackware 13)
View 2 Replies
View Related
Feb 25, 2010
I've installed some custom programming fonts, namely Speedy.pcf. Its a .pcf, so I just coped it into /usr/share/fonts/misc, and ran mkfontscale, mkfontdir. I can use the font fine in 'xfontsel' and 'urxvt', but when GTK2 tries to render this font. its not even the same font, its just using some default font.
View 3 Replies
View Related
Apr 29, 2011
Is it just me or does the font rendering in Slackware64 13.37 look bad? It reminds me of the bad old days of having to recompile freetype with the then-patent-encumbered option to make the fonts look decent. When I print, everything looks normal. On screen it doesn't look right. I don't really know how to describe it other than it how things used to change after a freetype recompile. Is there anything major that changed between 13.1 and 13.37 WRT fonts in KDE, X, or freetype for that matter? FWIW, I did a clean install with a new .kde instead of using the old one.
View 14 Replies
View Related
Feb 7, 2010
When I run xload, it gives the following:
Code:
xload
Warning: Unable to load any usable ISO8859 font
Error: Aborting: no font found
It's an up-to-date Slackware64 current, with only ruby and poppler downgraded to 13.0, but I don't think either would do it.
It's not a big deal, but I wonder if it might be a sign of some bigger problem.
View 3 Replies
View Related
May 24, 2011
I'm running slackware 13.37 and when looking through the x.org log I see that two directories are missing:
Information[ 68.572] (WW) The directory "/usr/share/fonts/local" does not exist.
Information[ 68.572] Entry deleted from font path.
Information[ 68.572] (WW) The directory "/usr/share/fonts/CID" does not exist.
[code]....
View 3 Replies
View Related
Dec 28, 2010
I was using UBUNTU and still do, but I dual boot UBUNTU/Slackware now and my Linux knowledge has increased so much. This forum has been right there with me for the last couple weeks and I was reticent to post a question until a knew I had exhausted the available sources. So here goes.....Can I change the font size of the system shell that begins at startup (with the boot info and stuff). I really like using this shell as user. The thing that would make me nuts for it is if I can make the text a bit smaller. I have a 1920x1200 display and could really take advantage of all of that "real estate." The other posts related to this seem to focus an a broken configuration from the beginning, but my install is SWEET. Can I change this or is it baked into the system?
View 11 Replies
View Related
May 24, 2010
Updated from KDE 4.3.5, saw memory consumption dropped a little bit, speed increased by a few percent. But when I added a widget to the panel, I could not see the widget. And when I double-clicked the same widget in the widget list (intending to remove it -- if it is a T' flip-flop), the widget was still on the panel, alive, and hidden.
Then I gave up, and wanted to change the font for the digital clock, and KDE was frozen. Ctrl-Alt-Backspace worked, fortunately. I think for my workshop presentation next week, I'd better use xfce.
View 6 Replies
View Related
Dec 3, 2010
How do I increase the font size on a tty. I have googled it and still don't have a Slackware way of doing it. What /etc file needs to be edited?
View 1 Replies
View Related
Jul 20, 2010
I use Vector Linux 6 (based on Slackware 12.1) and I set the encoding to UTF-8 because I use Spanish characters. The problem is that when I try to open files with accent marks, for instance, with xpdf they all look garbled. How can I get xpdf to display the names correctly?
View 9 Replies
View Related
Jun 14, 2010
I compiled my own XPDF (as it was not in the repo) but now I need to add some japanese language support..I already did yum groupinstall "Japanese support" But what japanese fonts are installed and where are they located?I need it for.. this line #displayCIDFontTTAdobe-Japan1/usr/..../kochi-mincho.ttf
View 1 Replies
View Related
Feb 10, 2011
how i install "XPDF package" and "Antiword" into my server ?
i found antiword from winfield.demon.nl/ and XPDF package from [URL]
my Kernel version is2.6.18-194.17.1.el5 using cPanel Pro1.0 (RC1)
View 8 Replies
View Related
May 21, 2011
After installing libre3.3.2 using the Slackbuild scripts, I found that it displayed fonts correctly, but doesn't print the same font on the printer. The output of the printer should be Arial, but is instead some elongated, overlapping mess.
The same Slackware package installed on SW13.1 prints normally. (Same computer, different partition)
Spadmin used to control the printer fonts, but apparently not anymore.
System: Linux nadrek 2.6.37.6-smp #2 SMP Sat Apr 9 23:39:07 CDT 2011 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ AuthenticAMD GNU/Linux.
View 14 Replies
View Related
Jan 29, 2010
how I can get elinks to open pdfs using xpdf? I know that there are other browsers/pdf programs but I'm using this across the internet and this seems to be the lowest bandwidth option!
View 1 Replies
View Related
May 24, 2010
Xpdf is gone from our repos. It was the only app that could kick away the password of PDF files. Could it be again in our Debian Distro?
View 1 Replies
View Related
May 24, 2011
When I open a pdf file (e.g., beamer file) using xpdf, there's an annoying window on the left displaying section headings. Presumably it's possible to close it, ideally toggle it closed and open with a key binding, but I can't find out how to do this.
View 4 Replies
View Related
Jul 9, 2010
Essentially I have found this guide, but it is for miktex, i need a guide for texlive on Debian/Ubuntu which will not pollute dpkg installed texmf.
I'm interested in converting TrueType font to be usable in (pdf)(La)TeX.
All the power google turn up just stuff f relating how to install microsoft fonts or do stuf on MikTeX.
I CANNOT USE XeLaTeX!!! I use pstricks and the font must be available in plain TeX! Otherwise my document looks inconsistent!
View 1 Replies
View Related
Jul 8, 2010
Most of my work happens in a terminal, so I need a clear, readable font. I've settled a while ago on Terminus [URL]..., which works wonders for me. I added XTerm*faceName : Terminus in my ~/.Xdefaults, and I do get the Terminus font. Unfortunately, a lot of Unicode glyphs are missing (mathematical symbols, greek and hebrew letters), displaying as little square blocks instead.
If I remove the faceName entry, the default configuration seems able to display most of the glyphs (including math, greek, hebrew, runic, and whatever else), but the default font is much harder to read.
A google search hints that it should be possible to use Terminus as the default font, and fallback to (an)other one(s) for missing glyphs, but provides no further explanation. I've seen documentation that recommends Bitstream Vera Sans as a fallback, but it lacks the glyphs I need too; I don't know how to identify the default font used by xterm either, I had a look at /usr/share/X11/app-defaults/XTerm, but all I can find are generic references to old pre-fontconfig font names.
Using Gentoo Linux, fontconfig and xterm are up to date, USEs trutype and unicode enabled, X.Org server 1.6.
Edit: I alternate between Ratpoison, Awesome and XMonad, without a desktop environment.
View 1 Replies
View Related
Aug 16, 2010
I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
View 4 Replies
View Related
May 4, 2010
Actually I want to log a bug but I don't really know what package to log it against. The problem is that by default Pango is choosing the AR PL UMing CN as the font to render Japanese text when the current font doesn't have Japanese glyphs. But AR PL UMing CN is a Chinese font, so Chinese glyphs for kanji characters (e.g., 覚) are displayed. This is jarring and confusing for Japanese readers.
This situation mostly arises when you have mixed English and Japanese text. Some applications (for instance Firefox) will allow you to select a font for Asian text. Thus if the text contains only Asian characters it will use the font you select, rather than what Pango would have selected. But if it is a mix of English and Japanese, you end up with the wrong glyphs.
Other environments (like gnome-terminal, or a gedit) have difficulties as well. Since the primary interface requires mono spaced roman characters you run into difficulty selecting fonts. Most Japanese fonts only have proportional roman characters. This means that if use a nice roman font and use Japanese text (for instance file names), you end up with Chinese glyphs. What I want is a mechanism that will work across all of Gnome for selecting the font I want to use for Chinese characters. That way I can choose either Japanese or Chinese glyphs.
I realize this is low priority. It only bugs me a little, but many of my Japanese colleagues are put off from using Ubuntu because they are confused by the Chinese glyphs that pop up on my screen from time to time. As I said, I'd like to file a bug, but I'm not sure against what package...
View 2 Replies
View Related
Feb 25, 2010
In all previous versions of KDE I had Console8x16 set as KDE font for all cases (Settings->Appearance->Fonts). After tonight upgrade, this (only!) font is not working. I can see it in font manager, I can set it in ...Appearance->Fonts, but actually remains default font. Two of about 30 attempts somehow (can not reproduce) succeeded to set "console 12" font, but it disappeared after restart.
1. What can be the problem in 4.4?
2. In /usr/share/fonts tere are 3 files named console8x16.pcf, console8x8.pcf and console9x15.pcf, but in the font list in Appearance->Fonts I can see only 2 - one named "Console" (seems to be 8x16 and "console" (8x8). File 9x15 does not appear at all. Why?
Last results of attempts: cannot use console font in part of areas, while part works OK. For example: kdevelop editor, kmail message body text works OK. But kmail other parts - does not. The most interesting is that although setting the kmail body message text to console displays the message body text correctly (with console font), but the example message in "Configure kmail" dialogue "The Quick Brown Fox Jumps Over The Lazy Dog" is displayed in the default font, as if there is no console font!
View 3 Replies
View Related
Dec 11, 2009
I also have an application installed under /usr/share/myappHow to make a link to the application installed under myapp in to a directory that is already in my env variable?
View 2 Replies
View Related
Oct 4, 2010
The shell is bash.
The directory path, /this/is/directory/aa, is actually linked to the path /this/is/link/aa.
So when I cd to the aa directory I am in /this/is/link/aa and there is no /this/is/link/bb hence the error with ls.
My question is how does cd understand relative paths and not return an error the way ls does?
View 1 Replies
View Related
