Slackware :: Fresh Install On VirtualPC With Errors At Startup?
May 7, 2010
An error accoured during the root filesystem check.
Installed fresh Slack 13.0 version, at 7GB virtual hdd, with cfdisk, created two primary partitions, 500 mb for swap, whats left, to second partition, made it bootable, installed full software package, used all default selections, only refused to configure network. At first restart, I got a screen with many statements, that looks like errors, and a last one, that looks like critical error.
An image I have been working on Windows my whole life and only worked with already installed linux systems a bit. Installed RedHat and FreeBSD on VirtualPC previously and succesfully. Now, I stumble upon this error and cant think of next step.
View 5 Replies
ADVERTISEMENT
Nov 11, 2010
I did a fresh install of Ubuntu 10.10 i386 on Asus EeePC S101 (1GB RAM, 32GB SSD). On the first boot of the freshly installed system I get 2 error popups several seconds after the screen goes into black graphical mode:popup 1:
Code:
Could not update ICEauthority file /var/lib/gdm/.ICEauthority
After I close that popup, I immediately get another:
[code]....
View 2 Replies
View Related
Jul 23, 2010
I just activated backports and partners and I got it.
-------------------
I just bought a newish asus x83vm-x2 and am dual-booting seven and lucid lynx. On my last two computers I had migrated completely to Ubuntu, but windows 7 has a few compelling features...Anyways- I'm having issues upgrading the kernel on my fresh install of ubuntu (not that it matters, but I installed via jump drive).In update manager, the kernel upgrades are grayed out.
In synaptic, I get these (current kernel version is 2.6.32.21.22 btw)-
Code:
linux-generic:
Depends: linux-image-generic (=2.6.32.24.25) but 2.6.32.21.22 is to be installed
linux-image-generic:[code]....
It appears as thought "linux-image-2.6.32-24-generic" is not in the repository... but if that were the case, you'd think that my machine would just auto-update to an earlier version. IDK- I'm confuddled.
View 9 Replies
View Related
Mar 4, 2009
1. Why do we need to use virtual simulation software such as VirtualPC, VirtualBox and VMWare to install linux?
2. Why linux OS always came with newer version and updates?
View 2 Replies
View Related
Mar 25, 2011
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies
View Related
Dec 12, 2010
I've been using Eric's KDE packages since last June or so, and have been using the same command the whole time to download them. But today I went to get KDE 4.4.5 for the fresh 13.1 install I just did on my wife's laptop and KDE 4.4.85 (hell, yeah!) for my -current box. In both cases the command returned the same error. Here's the command and error message on my -current machine:
Code:
gene@lemon:~$ rsync -av --progress rsync://alien.slackbook.org/ktown/4.5.85 .
@ERROR: Unknown module 'ktown'
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
View 6 Replies
View Related
Jan 7, 2011
I have 4 1GB memory modules in my AMD64 X2, and Slackware 64-13.1 'free' tells me I only have 3.7GB. Never heard of this problem on a 64bit system.
View 6 Replies
View Related
Dec 27, 2010
Before i would to say sorry because my bad English,
i have install slackware 13.1 with no problem,but the problem is that i reboot after finish install.
in the middle it's stop booting and can't continue...
View 8 Replies
View Related
Jan 25, 2010
I installed slack 13 from disk 1, and then went ahead and installed the missing sets using slapt-get (t,tcl,x,xap and y). I skipped the kde and kdei sets. When I start xfce, the fonts are all messed up as shown in the attachment.
View 2 Replies
View Related
Jun 13, 2010
I'm not sure how you do it, but it seems like you should be able to. How do you upgrade the version to 13 without burning a new CD? I just used slackpkg update, slackpkg upgrade-all, but when I tried install-new it had nothing to do.
View 5 Replies
View Related
May 28, 2011
I have just installed Slackware 13.37. After the install - when executing startx for the first time, the xfce desktop freezes when its almost (?) fully loaded.
While loading I can move mouse and if I hit caps_lock the lamp at the keyboard turns on and off.
In the setup I choosed to use vesa - allthoug I afterr that even tried to boot from lilo into vga-mode.
I am, a litle rusty after have been brainwashed through Ubuntu for a few years (sigh) - so I really am not sure which config-file I should edit, and xorg.conf seems to be empty.
View 2 Replies
View Related
Feb 10, 2011
I just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
View 4 Replies
View Related
Jan 2, 2011
I just did a fresh install of Slackware 13.1:
However, I get 4 grub listings for Slackware.
1. leads to kernel panic.
Code:
2. leads to kernel panic but with
Code:
3.... welcome to Linux 2.6.33.4 (tty1)
4. Welcom to Linux 2.6.33.4-smp (tty1)
I have never had any trouble with grub, and consequently never had to edit much in grub.
View 11 Replies
View Related
Jun 2, 2011
Just tried to install gnucash on a fresh install of 13.37. ALL dependencies are installed, with no errors from any. The gnucash slackbuild dies with a message that says "gnome.h, no such file or directory". All I can find is that it is and very old dependency of gnome.
View 9 Replies
View Related
Jan 21, 2010
Any kde app(dolphin, device notifier...) can't see my internal drive with ntfs and any connected flash drive. I've thought that this is problem with missing dependecies or hal but 'lshal -m' shows messages when J connect flash drive so i don't know where the problem is. I've installed all required and recommended and some optional packages from URL...and it has no effect. Does anybody know what i have to do to make it work.
View 2 Replies
View Related
Jul 5, 2010
So I don't like the new Amarok as much as the 1.4 version, so I want to install the older release. I download the source files, extract it and go into the directory. I type ./configure and recieve an error about kde-config not being installed, but "ln kde4-config kde-config" (or something like that) solved that problem. But now I encounter this problem after ./configure:
Code:
I already have a version of Qt installed (it's necessary for KDE, is it not?), but it's not between 3.3 and 4.0. I've read online about how if you install both the 3.3 and the version included on Slackware 13.1 of Qt there would be problems. I also read that you could find the necessary Qt files in the sources discs, but I'm not sure what files to install:
Code:
This is Slackware 13.1, by the way.
Do I have to shamefully resign my pride to Amarok 2.3 or can I install 1.4 in some way? And if you've gotten this far, thanks for reading and potentially responding.
View 11 Replies
View Related
Jan 15, 2011
I've been using Linux ( Ubuntu from like 4 months ) the first time of my life and I just love Linux, but I just feel that I need to switch to Debian like its the best and the powerful distro. I've installed Debian pretty well, then when rebooting it. I cant find my Ubuntu distro on the grub loader, then when I enter to my Debian distro. I just have that black screen with the note (out of range), so I've went to Google but as u know I am still a rookie, so I could avoid this problem by using.
alt + ctrl + ( - ), so I went to connecting the internet maybe I could download that nvidia drivers so it may fix the problem, but the most shock is that the internet isn't working with me. I am pretty sure that I've entered the IPs correctly but I really don't know whats the main problem is, with Ubuntu its much easier and it really worked quickly but as I said I just feel something for Debian , something that attract me to it.
View 3 Replies
View Related
Dec 29, 2008
After a new install of Slackware 12.2, I carried out the following procedures to get everything working successfully right out of the box. The server is a standalone system, used for testing and educational purposes, so please bear that in mind. NB: Throughout this post when you see a single # at the start of a line it means you are typing the commands as root user. You should not include the #, only the text after it.
### setup Apache with php enabled
Login as root user on your Slackware box and type:
# pico -w /etc/httpd/httpd.conf
[code].....
View 18 Replies
View Related
Mar 1, 2010
I'm fairly new to Linux so I'm going to need a step-by-step guide to get me out of this rut. The install of Linux was fine but when I booted up I got this error. VFS: Cannot open root device "302" or unknown-block (3,2) append a correct "root=" boot option;here are the available partitions;
0800 78150744 sda driver:sd
0801 47428608 sda1 <-- this is my Windows partition
0802 30719552 sda2 <-- this is my Linux partition
0b00 1048575 sr0 driver:sr
0b01 1048575 sr1 driver:sr
Kernel panic - not syncing:VFS:Unable to mount root fs on unknown-block (3,2) I guessed from reading this error Lilo isn't pointing to the right partition to boot from? How will I fix this? I read another thread about boot problems on these forums and a guy said to do this:
#mkdir /slacktemp
#mount /dev/device /slacktemp
#chroot /slacktemp
#cd /slacktemp/etc <-- for me it told me that doesn't exist
#vi lilo.conf <-- couldn't do nothing and was frozen
#lilo -v -t -b /dev/device
#lilo -v -b /dev/device
The above solution did not work for me. Can anyone shed a light on a Linux rookie?
View 14 Replies
View Related
Jan 21, 2011
I just installed Fedora and it worked for a few reboots. I am getting the following errors on startup:
Could not update ICEauthority file. /var/lib/gdm/.ICEauthority
There is a problem with the configuration server.
View 1 Replies
View Related
Oct 10, 2010
I installed Vista in VirtualBox 2 days ago and all has been well since. However I just started VB tonight and although it started up ok, when I clicked on Start (Vista) I get the following pop-ups.
Although one of the errors appears to say what I should do, I don't understand it
Could somebody tell me what I need to do to fix it please? Preferably in English
View 9 Replies
View Related
May 13, 2011
Whenever I try opening the Gnome Activity Journal from Applications > Accessories > Gnome Activity Journal, it doesn't open, nothing shows up, and not even in the System Monitor. So I took a different route, by opening it from the Terminal, to see if it gave me anything, and when I type in 'gnome-activity-journal' it spits this out at me:
Code:
View 1 Replies
View Related
Jun 22, 2011
I have a server that, due to the amount of data it's moving, tends to trash up the hard drive when I have a power outage or crash. It doesn't have a keyboard or monitor attached to it normally so it's a real pain when I have to boot it back up. I have to hook one up just to hit F to have it fix all the errors. Is there a way to have it do this automatically on boot rather then having to confirm it?
View 2 Replies
View Related
Oct 31, 2010
I've added httpd to runlevels 2-5 using chkconfig, and also double checked it using ntsysv, but it still won't run on startup, even though it works just fine when started manually (using "sudo service httpd start").The results of "chkconfig --list httpd" show it is on for levels 2-5, and I've confirmed the current runlevel to be 3. I've found no errors in the logs (neither Apache's nor the system's), but maybe I'm looking at them wrong...My machine is a VPS (on VMWare) running CentOS 5.5 32bit. For additional information, see the output of getinfo.sh: http://pastebin.centos.org/35570I would greatly appreciate help on this, as it is delaying our NGO from moving servers.
View 3 Replies
View Related
May 4, 2011
On installing the Nvidia driver using Nvidia's 173 legacy installer I noticed a load of errors which are recorded in the log below. The driver appears to be working. Is this something that I should be concerned about?Quote:
ERROR: Unable to open '/usr/X11R6/lib64/xorg/modules/extensions/libglx.so' for
reading (No such file or directory)
ERROR: Unable to open
[code]....
View 2 Replies
View Related
Jun 11, 2010
in preparation for the update to Slackware64 13.1 I did a complete backup of my system with dd.
I used the Slackware 13.0 (not 64 bit) DVD to boot and executed the command:
# dd if=/dev/sda of=/dev/sdb
The command finished without any errors as expected. First I tried to boot the destination hard disk to check if the backup was successful and I can start with updating the source disk to 13.1. But at boot time I got the message that the last file system check is 197 day ago, the file system check started automatically and found errors which it could not correct. At this point I thought it was maybe a copy or a hard disk error and tried to boot the source disk. But the behaviour was exactly the same on the source disk. With the source disk I followed then the recommendation, logged in with root password and executed the recommended command which was something like e2fsck -v -h /dev/sda1. Then the system did a file system check and scrolled a lot of numbers over the screen. After a while it reported that it's ready and the system needs a restart.
I switched off and on again. Then the system bootet as usual, and seems to run okay at the moment. But now I'm unsure if really everything is okay.
What I'm confused of is, why the system reported that the last file system check was 197 days ago and why this was just after the dd backup. Shouldn't the automatic file system check at boot time run more often as every 197 days or mounts? I didn't change any default settings (as far as I know). The file system of the root partition is ext4 and my computer normally is switched on and off once every day.
My question now is, if this behaviour can have something to do with the dd backup.
Is my system after the file system check okay again, or should I expect further problems?
View 12 Replies
View Related
Aug 7, 2010
The system is 13.1. Updated using slackpkg. All other software, with the exception of closed source Vbox, is installed via SB.orgDid a slackpkg update this morning for firefox 3.5.8 and there was also a glib upgrade (likely culprit). Now it seems that most of my software does not work. Did I do the upgrade wrong?
Code:
frank@hdwise:~$ firefox
/usr/lib/firefox-3.6.8/firefox-bin: symbol lookup error: /usr/lib/libgnome-2.so.0: undefined symbol:
[code]....
View 10 Replies
View Related
Jun 4, 2010
I recently upgraded my VLC and Avidemux from AlienBOB's Repo.
With VLC media player 1.1.0-rc2, i get the following error when i try to play a video:
Code:
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
[Code]....
View 7 Replies
View Related
Jan 27, 2010
I have installed slack 13 and I want to configure the sistem to send automaticaly an email to an gmail account when I have some errors like power down for some minutes or a program crash. Can some one tell me exactly what i must do ?
View 5 Replies
View Related
Dec 27, 2010
i upgraded my netbook to slack-current (32bit) and now When booting up dmesg shows these errors:
Code:
[ 10.770199] [drm] detected 63M stolen memory, trimming to 32M
[ 10.770267] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 10.770280] [drm] set up 32M of stolen space
[ 10.770468] [drm:init_ring_common] *ERROR* render ring head not reset to zero ctl 00000000 head 02001000 tail 00000000 start 02001000
[Code]....
This happened with generic stock kernel and is also happening with 2.6.36.2 zen kernel. Is it something serious? Kde compositing still works, except it locked up few times when i was testing how windows wobble in kde, but not recently.
View 2 Replies
View Related
