Slackware :: Get KDE 4.4.5 For The Fresh 13.1 Install?
Dec 12, 2010
I've been using Eric's KDE packages since last June or so, and have been using the same command the whole time to download them. But today I went to get KDE 4.4.5 for the fresh 13.1 install I just did on my wife's laptop and KDE 4.4.85 (hell, yeah!) for my -current box. In both cases the command returned the same error. Here's the command and error message on my -current machine:
Code:
gene@lemon:~$ rsync -av --progress rsync://alien.slackbook.org/ktown/4.5.85 .
@ERROR: Unknown module 'ktown'
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
View 6 Replies
ADVERTISEMENT
Mar 25, 2011
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies
View Related
Jan 7, 2011
I have 4 1GB memory modules in my AMD64 X2, and Slackware 64-13.1 'free' tells me I only have 3.7GB. Never heard of this problem on a 64bit system.
View 6 Replies
View Related
Dec 27, 2010
Before i would to say sorry because my bad English,
i have install slackware 13.1 with no problem,but the problem is that i reboot after finish install.
in the middle it's stop booting and can't continue...
View 8 Replies
View Related
Jan 25, 2010
I installed slack 13 from disk 1, and then went ahead and installed the missing sets using slapt-get (t,tcl,x,xap and y). I skipped the kde and kdei sets. When I start xfce, the fonts are all messed up as shown in the attachment.
View 2 Replies
View Related
Jun 13, 2010
I'm not sure how you do it, but it seems like you should be able to. How do you upgrade the version to 13 without burning a new CD? I just used slackpkg update, slackpkg upgrade-all, but when I tried install-new it had nothing to do.
View 5 Replies
View Related
May 28, 2011
I have just installed Slackware 13.37. After the install - when executing startx for the first time, the xfce desktop freezes when its almost (?) fully loaded.
While loading I can move mouse and if I hit caps_lock the lamp at the keyboard turns on and off.
In the setup I choosed to use vesa - allthoug I afterr that even tried to boot from lilo into vga-mode.
I am, a litle rusty after have been brainwashed through Ubuntu for a few years (sigh) - so I really am not sure which config-file I should edit, and xorg.conf seems to be empty.
View 2 Replies
View Related
May 7, 2010
An error accoured during the root filesystem check.
Installed fresh Slack 13.0 version, at 7GB virtual hdd, with cfdisk, created two primary partitions, 500 mb for swap, whats left, to second partition, made it bootable, installed full software package, used all default selections, only refused to configure network. At first restart, I got a screen with many statements, that looks like errors, and a last one, that looks like critical error.
An image I have been working on Windows my whole life and only worked with already installed linux systems a bit. Installed RedHat and FreeBSD on VirtualPC previously and succesfully. Now, I stumble upon this error and cant think of next step.
View 5 Replies
View Related
Feb 10, 2011
I just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
View 4 Replies
View Related
Jan 2, 2011
I just did a fresh install of Slackware 13.1:
However, I get 4 grub listings for Slackware.
1. leads to kernel panic.
Code:
2. leads to kernel panic but with
Code:
3.... welcome to Linux 2.6.33.4 (tty1)
4. Welcom to Linux 2.6.33.4-smp (tty1)
I have never had any trouble with grub, and consequently never had to edit much in grub.
View 11 Replies
View Related
Jun 2, 2011
Just tried to install gnucash on a fresh install of 13.37. ALL dependencies are installed, with no errors from any. The gnucash slackbuild dies with a message that says "gnome.h, no such file or directory". All I can find is that it is and very old dependency of gnome.
View 9 Replies
View Related
Jan 21, 2010
Any kde app(dolphin, device notifier...) can't see my internal drive with ntfs and any connected flash drive. I've thought that this is problem with missing dependecies or hal but 'lshal -m' shows messages when J connect flash drive so i don't know where the problem is. I've installed all required and recommended and some optional packages from URL...and it has no effect. Does anybody know what i have to do to make it work.
View 2 Replies
View Related
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Jun 30, 2011
I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
View 4 Replies
View Related
Jul 31, 2010
I am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?
View 4 Replies
View Related
Mar 15, 2011
After a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
View 8 Replies
View Related
Apr 16, 2011
I have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.
View 4 Replies
View Related
Apr 18, 2010
after the install with kde selected i get a command line however typing startx tells me no startx installed, startkde says "$DISPLAY is not set or cannot connect to the X server."
hwinfo --gfxcard says
Hardware Class: graphics card
Model: "Trident Microsystems 9910"
Vendor: pci 0x1023 "Trident Microsystems Inc."
Device: pci 0x9910 "9910"
SubVendor: pci 0x1179 "Toshiba America Info Systems"
SubDevice: pci 0x0001
Revision: 0x63
laptop is a tecra 8200 and the graphics card is actually "Trident Microsystems CyberBlade XP" not sure of that is the problem or what to do about the whole thing
View 9 Replies
View Related
Aug 20, 2010
I downloaded the iso from the webpage and used the live cd option. From there I chose install and proceeded to install the OS. Everything went fine and I got a message that the system would need to restart without the live cd. I saw the chameleon with the white growing line under (which seemed to run to it's completion) and then I came to a screen mostly white with three option buttons in the bottom right corner and my mouse with the waiting symbol spinning in the middle of the screen. Basicly the symbols stops spinning after a little while and the system hangs. I have tried starting in fail safe mode and run level 3 with the same result. My laptop is a MSI GX740
Edit: I have tried both ubuntu and mint earlier today and those Live CDs wouldn't even start. Also I am using the CD size Gnome ISO. Maybe some of the content on the dvd iso would provide support for my HW?
View 9 Replies
View Related
Jul 15, 2011
I had to reinstall OpenSUSE after I reorganized my hard Drive partitions... I was trying to update the system when I encountered an ERROR: Problem connecting to a software origin There was a (possibly temporary) problem connecting to a software origins. DETAILS File"/repodata/repomd xml' not found on medium [URL] My repositories too seem all right.
View 8 Replies
View Related
May 3, 2010
I'm running Win XP 64 bit and ubuntu 9.10 as a dual boot. I also have the CD for Ubuntu 10.04. My question is, I want to do a fresh install and would prefer it to install over 9.10. Is this what will happen or will it want to install as a 3 way boot??
View 2 Replies
View Related
Jul 26, 2010
I installed ubuntu some weeks ago, then had to install compiz and other stuff like nvidia-current myself...now when i do a fresh install, it's there which means some files are saved.. how do i stop that, and make a 100% fresh install?
View 3 Replies
View Related
Nov 6, 2010
I just performed my first (successful?) Ubuntu installation. The installation process seemed to go fine, and I selected "Ubuntu Desktop" when asked which set of packages I wanted to install. I assumed this was a standard choice.
After the installation finished, the system rebooted and brought me to a login prompt.I'll mention at this point that I have SOME prior experience with Linux systems, but I'm by no means an expert, and I'm new to Ubuntu. I logged in and tried startx, only to be informed that it was not installed. Having performed a network install, I have internet access on the machine, so I tried "sudo apt-get install xinit" which seemed to work, but now when I run startx, my window shrinks to a portion of my monitor size, the colours invert (black prompt on a white background) and the system locks up. I'm assuming this is some sort of video driver issue, and could probably explore further, but I figured I'd ask some experts first.
View 2 Replies
View Related
Apr 17, 2009
I decided to do a fresh install of 5.3. I dedcided to use the entire HD for the install and not partition in any special way. I told it to format the HD and use the entire HD for linux OS. Just went thru the install with no additional software added, only what was the default install. After prompting for a user name and password i rebooted as requested. The issue is that i recieve no GUI to login to the desktop. Im able to SSH to the box and i tried doing yum update and it did not fix anything.i want to learn the command line but i need the gui for backup.
View 10 Replies
View Related
Dec 26, 2009
I dont ve any sound in my F12 fresh install. i ve updated it but i didnt check if the sound was workin earlier. My laptop is compaq presario Cq60.
I disabled pulse audio from startup and create the client.conf file in .pulse folder with the following code:
Code:
View 14 Replies
View Related
Feb 16, 2010
I recently bought an F12 DVD (from a UK supplier) which I took to be a "full distribution". But looking back on the web site it was not described as such. After booting I selected the Replace Existing Linux System option and it listed the installation of 204 packages - much smaller than the 933 packages when I installed F9.
The kernel is now FEDORA (2.6.31.5-127.fc12.i686.PAE)
My problem is that I am now faced with a very intimidating terminal. I am sure the installation did not offer a graphical interface. I have tried to get Gnome running by following the Installation Guide :-
1) 7.4.2 Booting into a Graphical Environment
I type in -gedit /etc/inittab
and I get back --bash: gedit: command not found
2) 15.3 Switching to a Graphical Login
I type -yum group install "GNOME Desktop Environment"
Response -Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again.
3) Again under 15.3 - bullet point 3)
Type -/etc/inittab
Response --bash: /etc/inittab: permission denied
I have now run out of ideas. I'm sure it is not supposed to be difficult but I don't understand the implications of the command line responses. I really don't want to be condemned to a win dependency.
View 8 Replies
View Related
Jan 1, 2011
I have a problem with fresh installation of Fedora 14. I've installed it from LiveCD, everything worked fine, but after installing security updates, Fedora stoped working. I mean, not immediately, but right after rebooting. Firstly, I got 1 more option to choose in Grub (which system).
This was also in Ubuntu, so I choosed the first option,- Fedora stopped booting right before the end. Also the second option didn't boot, and now I have to use this ugly Vista
I don't know what to do, reinstalling whole system won't be a problem, but what if it repeats?
It's Fedora 14 using GNOME with i686 architecture.
View 5 Replies
View Related
Feb 11, 2010
Every times, after a fresh install of ubuntu karmic, i use update manager for to get all possible updates and regularly on reboot i have a filesystem check with immediate reboot.P.s. I tried also to divide the updates, but in this way happens even twice.
View 4 Replies
View Related
Mar 20, 2010
I just installed ubuntu 9.10 on my computer and it just freezes without me doing anything.If i open my computer and leave it like that it will freeze after 5 mins or so.
View 8 Replies
View Related
May 29, 2010
I upgraded to 10.04, upgrade went fine but now I have lots of problems.My wireless internet is extremely slow, its as if I am on dail up.My Rogers Rocket stick that used to work perfectly is now not connecting to the internet wich is a huge problem for me.Flash player now dont work either and Mozilla thinks its not even installed.I cant change the time and date, it tells me I have to unlock to change the Time but when I click on unlock nothing happens.Who knows what else is not working either.
I am not impressed at all with 10.04, my laptop and Netbook used to work perfectly before the upgrade and now I have tons of problems.What can I do to fix my problems or will a fresh install work better
View 7 Replies
View Related
