Slackware :: Change The Font For The Digital Clock, And KDE Was Frozen?
May 24, 2010
Updated from KDE 4.3.5, saw memory consumption dropped a little bit, speed increased by a few percent. But when I added a widget to the panel, I could not see the widget. And when I double-clicked the same widget in the widget list (intending to remove it -- if it is a T' flip-flop), the widget was still on the panel, alive, and hidden.
Then I gave up, and wanted to change the font for the digital clock, and KDE was frozen. Ctrl-Alt-Backspace worked, fortunately. I think for my workshop presentation next week, I'd better use xfce.
Re: 11.4 LXDE. I've changed the clock setting from the default 24hr "%R" to "%r %p (or %P)" but the am/pm fails to show in the taskbar. Is there anything else I can do to get the am/pm to show?
I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
Does anyone know how to change the font color for the clock applet? I have a dark background on my desktop and want the panel to be transparent but I can't read the clock.
I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
I've been running arch linux, with my clock set to UTC with no problem. Recently I installed slackware on a different partition. During the setup I chose to set my clock to 'local time' instead of UTC by accident. Now in slackware my clock shows the wrong time. Also in arch it shows the same wrong time.
I booted back into slackware and ran pkgtool to enter the setup again, and changed my time to UTC. But this makes no difference. My clock is still wrong in both slackware and arch. Do I need to reboot after changing my clock settings in slackware before it takes effect? how the clock or the setup works.
I upgraded from 13.1. I'm using Xfce4, I've been using a button on my lower panel to launch xlock. Been working fine the last month. Upgraded to 13.37rc3.pi this morning.
Used my computer today for several hours today (after the upgrade). No problems. Hit my xlock launcher a couple hours ago, animation started. Turned monitor off. Then a few minutes ago, when I turned my monitor back on, black/blank screen, no password prompt. Killed xlock (had to use -s 9); no change. Saw xscreensaver was running, killed that too. No effect on my locked screen.
I then killed kdm and logged back in to an Xfce session. Back to normal now. I hit my xlock button. Got an animation up, typed in my password, and got back to my desktop no problem.
I've got a strange problem: when I run Frozen Bubble from my user account, I get no sound, but the same game has sound with my wife's account and the root account.
EDITED TO ADD: My user account has sound for DVDs through Kaffeine, Mplayer, etc. And the system sounds are working just find.
connect your player to Ubuntu and with some magic Ubuntu changes it to a camera But now my 1 gig Philips Shoqbox can not play any music anymore.If i connect it in Xp it is also changed in a digital camera and i am not able to put any music file on it.In Ubuntu i can but the player doesnt see any of the songs.In Xp i cant format the player and can i do it in Ubuntu or Mandriva?Tomorrow i go install a new distro and is it a option to connect the device before i start the installation and format it then?And do i need to format it to fat32?Or is there a simple way to do it in a terminal?
On Ubuntu Maverick I wish to choose which application starts when I attach my Canon digital Camera. I seem to remember this choice appearing a long time ago and I chose Picasa. How can I change it to another application? It is not available under "Preferred Applications" as could be expected
Im trying to setup my sound I went into the multimedia settings and test my HDA NVidia ALC883 analog and it worked perfectly but when I played my HDA NVidia ALC883 digital it didnt work at all also I cant adjust my sound thew my computer I can only adjust the output volume on my speakers directly
For whatever reason, XBMC refuses to play the audio. Xine plays the audio but with a distressing static noise. MPlayer and Kaffeine play the files fine. The bottom line is XBMC and Xine seem to dislike pcm_u8 audio, or the way the audio is streamed with the video.I also cannot fast-forward the movies with some players, such as MPlayer or SMPlayer.
I haven't found whether I can select a different format with the camera, but to avoid player problems I'd like to convert the videos. My primary focus is playing in XBMC and Xine because I have both apps configured to be controlled with a remote control. What is the most compatible format to convert? This is with 12.2 or 13.0. I have ffmpeg, mplayer, and mencoder installed and probably all or most codecs I could use.
I have a strange problem with my Ubuntu Natty virtual machine running under VirtualBox on OSX.One day last week, my clock on the top bar in Gnome stopped displaying the correct time (I'm not running Unity). I'm on GMT, so right now it should be 9:31, but it's showing 3:31, so I think it's something to do with TimeZones. If I go into the date and time applet, the time is initially wrong but after a second sets itself to the correct GMT Time. The timezone is correclty set as London and it makes no difference if I unlock and set it again or select manual or automatic from internet time.
From a bash prompt, the "date" command shows: "Tue Sep 20 03:33:35 CDT 2011".If I run "sudo dpkg-reconfigure tzdata" I am correctly set as London. Upon exiting the commnand I'm shown the correct London time, but then typing "date" again shows the CDT time again.The clock is correct in OSX. This has been working fine for a month or two - I think it stopped working after an update last week. Any ideas?
This device doesn't automount, doesn't show in KDE 4's device notifier, and I can't mount this camera manually because it doesn't appear to get assigned to a device node. Any known solutions? It worked in Slackware 12.2, but not in 13.0 or 13.1.
In Kubuntu 10.10, the clock is set to military time. I shouldn't have to do the math just to look at the clock. There is no setting anywhere to change it to normal time.
I am using ubuntu. I have Cairo clock on my startup list, but after logging in cairo-clock appears on left top corner, but as it is the position reserved for computer, my home, mounted volumes etc. So I want to change default position of cairo-clock to left but there is no such option in the preferences of cairo-clock. My cairo-clock version is cairo-clock 0.3.4. Can I edit any config file of cairo-clock.
My clock needs to be set to usa time with am and pm But I don't see any option to select that? So I read online that I need to edit /etc/adjtime and change it from UTC to LOCAL
Problem is when I'm in the terminal it tells me I'm not in the sudoers file? So how do I fix my clock? its insane that I cant change the option in the clock options, and its also nuts that even though I created a root password I can't seem to just sudo and change it?
on the mac there is a piece of software to change the system clock so it shows the stardate instead of the month, day and year. Is there something like that for Ubuntu? I think it would be pretty cool to have a star trek themed desktop
I recently upgraded my clean install Ubuntu Studio 10.10 64bit to Natty 11.04 and whilst everything is working well (except for having no plymouth boot splash - but I'm looking into this) I have noticed that when I log in to the "Ubuntu" desktop (with the Unity launcher and Menu bar in the top panel) I can't seem to change how the time and date is displayed. It seems to be stuck showing 24 hour time only with no date no matter which setting I select in the 'Clock' tab of 'Time & Date Settings' menu.
The clock applet works perfectly when I log into the 'Ubuntu Classic' desktop and I am able to display the date and weather ok.
I have a laptop which I upgraded from Ubuntu 10.10 64bit to 11.04 as well and it doesn't have the same issue.
I thought it might have been a rouge Gconf setting so I dumped my entire gconf using
then restarted into recovery and removed my ~/.gconf folder entirely, rebooted again and logged back on. Apart from losing some settings like Evolution and Networking, which I reloaded, and my theme going back to the default theme, the problem still exists.
I've Lenny with Gnome installed. Under System -> Administration -> Login Window -> Local, I have Industrial Ximian Gnome theme. How to change clock type from 12 to 24 in the Industrial Ximian Gnome window?
I'm a student in a linux class and we just installed fedora. so far it's nice except that the work we do is in the CLI which I can barely see because it's so small on the screen! I've been squinting at the screen for a little while now but it's just proving to give me more of a headache and hurt my eyes than anything. Anyone know how to change the font size so that I can actually see the work I'm doing?
Whenever I use lpr on the command-line to print a text file, it uses DejaVu Sans Mono as the font. Is there a way to change this? I'd like to use Terminus as the font instead. I found that CUPS uses Courier as the default font for text files, so somewhere Courier is being aliased to DejaVu Sans Mono, and I have no idea where.
