I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View RelatedI've been using Eric's KDE packages since last June or so, and have been using the same command the whole time to download them. But today I went to get KDE 4.4.5 for the fresh 13.1 install I just did on my wife's laptop and KDE 4.4.85 (hell, yeah!) for my -current box. In both cases the command returned the same error. Here's the command and error message on my -current machine:
Code:
gene@lemon:~$ rsync -av --progress rsync://alien.slackbook.org/ktown/4.5.85 .
@ERROR: Unknown module 'ktown'
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
I have 4 1GB memory modules in my AMD64 X2, and Slackware 64-13.1 'free' tells me I only have 3.7GB. Never heard of this problem on a 64bit system.
View 6 Replies View Relatedslackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies View RelatedFirst time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
Before i would to say sorry because my bad English,
i have install slackware 13.1 with no problem,but the problem is that i reboot after finish install.
in the middle it's stop booting and can't continue...
I installed slack 13 from disk 1, and then went ahead and installed the missing sets using slapt-get (t,tcl,x,xap and y). I skipped the kde and kdei sets. When I start xfce, the fonts are all messed up as shown in the attachment.
View 2 Replies View RelatedI'm not sure how you do it, but it seems like you should be able to. How do you upgrade the version to 13 without burning a new CD? I just used slackpkg update, slackpkg upgrade-all, but when I tried install-new it had nothing to do.
View 5 Replies View Relatedafter update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies View RelatedI've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies View RelatedI've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies View RelatedI use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies View RelatedI have just installed Slackware 13.37. After the install - when executing startx for the first time, the xfce desktop freezes when its almost (?) fully loaded.
While loading I can move mouse and if I hit caps_lock the lamp at the keyboard turns on and off.
In the setup I choosed to use vesa - allthoug I afterr that even tried to boot from lilo into vga-mode.
I am, a litle rusty after have been brainwashed through Ubuntu for a few years (sigh) - so I really am not sure which config-file I should edit, and xorg.conf seems to be empty.
This is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
i just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies View RelatedI'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies View RelatedAn error accoured during the root filesystem check.
Installed fresh Slack 13.0 version, at 7GB virtual hdd, with cfdisk, created two primary partitions, 500 mb for swap, whats left, to second partition, made it bootable, installed full software package, used all default selections, only refused to configure network. At first restart, I got a screen with many statements, that looks like errors, and a last one, that looks like critical error.
An image I have been working on Windows my whole life and only worked with already installed linux systems a bit. Installed RedHat and FreeBSD on VirtualPC previously and succesfully. Now, I stumble upon this error and cant think of next step.
I just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
I just did a fresh install of Slackware 13.1:
However, I get 4 grub listings for Slackware.
1. leads to kernel panic.
Code:
2. leads to kernel panic but with
Code:
3.... welcome to Linux 2.6.33.4 (tty1)
4. Welcom to Linux 2.6.33.4-smp (tty1)
I have never had any trouble with grub, and consequently never had to edit much in grub.
As amarok 2 has lost so many useful functions in amarok 1.4,I decided to downgrade amarok to the version 1.4.10.
I tried to compile amarok 1.4.10 but met a error as follows:
I had ruby-1.9.1_p243-i486 and kdelibs3-3.5.10-i486-opt1 installed form slackware-current ,so what should I do now?
Any kde app(dolphin, device notifier...) can't see my internal drive with ntfs and any connected flash drive. I've thought that this is problem with missing dependecies or hal but 'lshal -m' shows messages when J connect flash drive so i don't know where the problem is. I've installed all required and recommended and some optional packages from URL...and it has no effect. Does anybody know what i have to do to make it work.
View 2 Replies View RelatedWhilst trying to install Slackware -current (using the usbboot.img), I'm able to hit enter to boot the hugesmp kernel but when it comes to pressing 1 to select a non-US keyboard map, nothing happens. It's a USB keyboard incidentally.
View 2 Replies View RelatedI'm trying to install Tk from CPAN in slackware-current x86_64 for perl v5.12.3 and get the following error message
Code:
In file included from Xlib_f.c:8:0:
Xlib.h:22:15: error: conflicting types for 'XKeycodeToKeysym'
/usr/include/X11/Xlib.h:1694:15: note: previous declaration of 'XKeycodeToKeysym' was here
[Code]....
Is there a place where I can download KDE 4.5 and install it in 13.1 without having to move to current?
View 5 Replies View RelatedI've been playing around with slackware a little bit in the past few weeks and it's been interesting. I do find, however, that people like to keep up to date with the -current version, and sadly I can't do that so easily because I live in the middle of nowhere and my only internet is at work. So, I'm looking for a way to download the -current slackware packages and make it into a slackware installation disc (DVD), but I have no idea where to begin - quite literally, I don't know where to find theofficial slackware -current files. I guess after that I have to figure out how to make it into a CD, but that's ok for now
View 11 Replies View Related
