I can't change fonts in Firefox preferences (Content).
My OS is openSUSE 11.3, KDE 4.4.4. release 8.
Any type and size of font I use, nothing happens. It's still same font which I choose for the first time I've started Firefox afer installing openSUSE 11.3.
I'm running OpenSUSE 11.2 on my Acer Aspire One with a 9 inch LCD. I have configured the monitor in Sax2 to reflect the size and 1024x600 resolution, and as a result the desktop fonts are all sized correctly.
However, the fonts on the KDM log-in screen are too large, and I'd like to reduce them if possible. Looking in the KDE Control Center, I tried using the Login Manager utility to adjust the KDM theme, but any changes I made seemed to have no effect i.e. changing the font size, or even the overall theme itself, still resulted in KDM using the default green OpenSUSE theme with large fonts.
Does anyone know, therefore, how to adjust the KDM font size or DPI in OpenSUSE 11.2?
When I increase the font size from Konqueror settings the web browser fonts change but the file manager fonts stay the same. Is there another way of setting them?
View 4 Replies View RelatedI have a Mac Powerbook G4. About two months ago my font sizes changed on Firefox browser. I have searched and tried many firefox apps to fix the problem, but NONE of them work.All I want to do is go back to my old firefox with normal size fonts ALL THE TIME, ALWAYS.
View 2 Replies View RelatedI'm a student in a linux class and we just installed fedora. so far it's nice except that the work we do is in the CLI which I can barely see because it's so small on the screen! I've been squinting at the screen for a little while now but it's just proving to give me more of a headache and hurt my eyes than anything. Anyone know how to change the font size so that I can actually see the work I'm doing?
View 5 Replies View RelatedNo matter what I do with system settings I cannot change the font size or type of font in Firefox and Thunderbird - other programs as well. Is there somewhat to change this? The fonts are too small and I have vision problems. I know I can hit ctrol ++ but with other distros I can change the deflt font size for the system. I am using openSUSE 11.3 and like it very much except for this lack of a feature.
View 7 Replies View RelatedWhen I run xterm from the command line, there seems to be some errors:
Code:
$ xterm &
$ Warning: Cannot convert string "nil2" to type FontStruct
xterm: cannot load font -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso10646-1
Then I press both the Ctrl and right mouse key, options are popup with font sizes of 'Default',
[Code]....
where can I change the font size in Opera?
View 1 Replies View Relatedhow to change the font size in Empathy please? I would like to make it slightly smaller so I can fit more text in the chat window.
View 6 Replies View RelatedI am running Ubuntu 10.04. When I first installed it, the virtual terminals had a good font size. After a few weeks, I set the visual appearance setting to normal (in the gui desktop). Doing this required me to install third party graphics drivers from nvidia. in installed fine, and my gui desktop still functions as I would expect, however, all of the virtual terminals now have a much larger font size, as does the ubuntu boot logo.
View 1 Replies View RelatedI was wondering how to change the xterm font size and may be the font itself. Also we go to tty1 when we press Ctrl+Alt+f1 , f3 and so on. Is there any way I can change that too and maybe change the colour of the font and the size of it. I did change the resolution once in ubuntu with startup manager. I'm using fedora 14.
View 13 Replies View RelatedMozilla 3.6.8, Linux Arch. It doesn't matter what minimum font size I set, Firefox still doesn't increase small font on pages...
View 6 Replies View RelatedI want to change gedit font size and color scheme as root but the font is locked out and when selecting a color scheme I get the following error: ** (gedit:2562): CRITICAL **: gedit_prefs_manager_set_string: assertion `gconf_client_key_is_writable ( gedit_prefs_manager->gconf_client, key, NULL)' failed How can I get around this?
View 2 Replies View RelatedIs it possible to change the grub 2 menu font size? i have a higher resolution and the entries have very tiny and hard to read. I know i could lower my current resolution but i don't want to decrease the text and picture quality.
View 1 Replies View RelatedI have just installed Ubuntu 10.10, the latest version, into my computer. But I notice that the font is small when browsing the web using Firefox. I need to have a bigger font because of my shortsightedness.
View 2 Replies View RelatedI installed Ubuntu on my Netbook. I like it to use the Terminals. I don't mean the "GUI-Terminal-Emulators", I mean those I can open with "Alt+FX". There the font size is to big, so I changed it with "dpkg-reconfigure console-setup". It worked, but after restart the font were "reseted" and big. Is there a way to permanently change the font size?
View 4 Replies View RelatedHow to change the GV menu font size? (not the document font size which is set by scale). man and info don't mention anything about this.
View 4 Replies View RelatedI've a high resolution monitor(2560x1440) on my laptop running Debian testing and would like to change the font size in X. I manage to change most of the fonts to a readable size through the openbox configuration manager. But the font in my login window and for example in apps like vlc is still very tiny. How this could be changed ....
View 2 Replies View RelatedI'm trying to do is protect the computer against housemates. The standard procedure I do with Lenny:
1. Password protect BIOS.
2. In BIOS, always boot from hard drive. Disable booting from any other device such as USB or CD-ROM.
3. Password protect Grub (v1) using the "password --md5 $1$9MuaA/$5TDLgvmcEiCWNr5W9VaMK1" syntax in my menu.lst file.
With the above precautions in place, [I think] the only way to gain root access to the system is to take the case lid off and proceed to do stuff physically (like set jumpers and/or take out the hard drive). Am I correct? My reasoning for this is, the computer boots -> must boot from HD -> must load Grub -> must go to default menu item since others are protected, and cannot command prompt in Grub without password.
Anyhow, In Squeeze, I was a bit disappointed to find out, after doing a bit of Google-research, that Grub v2 (which is standard on Squeeze now) does not easily support password protecting the Grub menu. Am I correct? Will this issue perhaps be addressed in the Squeeze final release? Is this feature dumb anyways because the Grub password is of no use (i.e. my paragraph above is complete horseradish)?
Another thing I would like to do is change the console font and size back to something more "normal" or "classic", not some crazy tiny font that's only found in totally bleeding edge Linux distrubutions <gasp!>. I found that the Squeeze console font (e.g. when I type Ctrl+Alt+F1) is wicked tiny. I wanna change it to "normal". Grub v2 password and console font config?
I recently installed an ATI graphics card driver (fglrx) and ran the aticonfig --initial program/option, which makes the necessary changes to xorg.conf for the user.
My original problem was that all of my font sizes were changed (far too small to even read). I found a temporary way around this by simply increasing the sizes in the gnome appearance properties, but the problem is there is no option to change the size of text that appears in editable fields. For example, simple text-line entry widgets in various applications appear very small (as well as the default text size in icedove mail). Trying to use openoffice.org Writer or Calc also gives the same results. It seems directly related to the sizes of "editable fields" (things like my text editor - gedit- appear to be fine, as well as my terminal). I'm guessing this could have something to do with my xorg.conf, but I've looked through the file and don't know what to change, or where else I could look. If it helps at all, I have most of my font sizes now (in gnome) set to 14, but they appear as 12.
I'm not sure exactly why this is happening, but I need some help in getting some of this text readable again. Please see the attached screenshot of a blank Calc spreadsheet, and it might shed some light on this. You might also notice that in the screenshot, the default font size is 10, but if I change this to 12, and then load it on say, a Windows computer, the text will appear to be much larger than a 12. I'll also include my xorg.conf, in case that has anything to do with it.
Code:
IS there a way to change the Font color of the top menu (File, edit, view History, etc) in firefox or all windows? I'm using a skin that I love but cannot read the menus at the top because the color is blending in.
View 1 Replies View RelatedI'm running OpenSuSE 11.3, upgraded from 11.1, with the Nvidia video driver. The font size for Yast, Firefox, and several other things is too small. I've tried changing it using the Appearance section of Personal Settings. That changes the font size in some contexts such as the window titles and task manager, but not in all contexts. In Firefox I've tried something similar, but it doesn't affect the font used in the tabs, function bar on the top, etc. The font in those parts of Firefox is the same as the one in Yast. So there's some other font setting around, but I haven't been able to find it. I've tried Google and SDB, but have no success searching there.
View 9 Replies View RelatedI am running openSUSE 11.4 KDE 64bit. I found the default font in YAST, for example, in Bootloader and Software Management, is about 8-9 points which is too small to read. Why on earth does openSUSE set a tiny font size as default?
I did try Configure Desktop >Application Appearance, etc. as well as qtconfig in the terminal but these seem not to increase the font size to 12-14 points.
When I am in the middle of reading a post in Akgregator and I decide I need larger characters, I press [Ctrl [+]] to increase font size. This increases the characters displayed but also displaces my vertical reading position so that I have to scroll to the text I have been reading.
View 3 Replies View RelatedI'm new to Suse and am wondering how to adjust the font size displayed by the terminal command. What I would like to do is make the font larger.
View 3 Replies View RelatedI am using freefonts2 packages with subpixel hinting support, but it is strange that some websites still show ugly fonts, i.e Make the most of Skype - free internet calls and great value calls
[Code]..
how to solve this issue? There are several websites showing ugly fonts, the rest is fine.
I disabled font smoothing in control center, but Firefox is still using smooth/blurry fonts. Everything else is how I want it. How to turn this off? I prefer the old ugly crisp fonts.
View 1 Replies View RelatedI just installed openSUSE 11.3 (Gnome). I am using Korean language, but I don't want to make Korean language as my default language. So I installed Korean lang as secondary language. It works well.But the problem is Korean font. Actually BEFORE installing the language, the font look much nicer. But as soon as I installed the language, the font became ugly.Even if I uninstal the language, the font still remains the same (ugly).
Where is the font setting for other languages stored? It would be nice if I can set default fonts for Korean language manually.
I'd like to change the font characteristics (size, colour) on initial login screen (list of users) however I cannot find the configuration options.
View 6 Replies View RelatedEssentially I have found this guide, but it is for miktex, i need a guide for texlive on Debian/Ubuntu which will not pollute dpkg installed texmf.
I'm interested in converting TrueType font to be usable in (pdf)(La)TeX.
All the power google turn up just stuff f relating how to install microsoft fonts or do stuf on MikTeX.
I CANNOT USE XeLaTeX!!! I use pstricks and the font must be available in plain TeX! Otherwise my document looks inconsistent!