I'm not sure how you do it, but it seems like you should be able to. How do you upgrade the version to 13 without burning a new CD? I just used slackpkg update, slackpkg upgrade-all, but when I tried install-new it had nothing to do.
View 5 RepliesI wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies View RelatedI've been using Eric's KDE packages since last June or so, and have been using the same command the whole time to download them. But today I went to get KDE 4.4.5 for the fresh 13.1 install I just did on my wife's laptop and KDE 4.4.85 (hell, yeah!) for my -current box. In both cases the command returned the same error. Here's the command and error message on my -current machine:
Code:
gene@lemon:~$ rsync -av --progress rsync://alien.slackbook.org/ktown/4.5.85 .
@ERROR: Unknown module 'ktown'
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
I have 4 1GB memory modules in my AMD64 X2, and Slackware 64-13.1 'free' tells me I only have 3.7GB. Never heard of this problem on a 64bit system.
View 6 Replies View RelatedI just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View RelatedEvery times, after a fresh install of ubuntu karmic, i use update manager for to get all possible updates and regularly on reboot i have a filesystem check with immediate reboot.P.s. I tried also to divide the updates, but in this way happens even twice.
View 4 Replies View RelatedI am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?
View 4 Replies View RelatedBefore i would to say sorry because my bad English,
i have install slackware 13.1 with no problem,but the problem is that i reboot after finish install.
in the middle it's stop booting and can't continue...
I installed slack 13 from disk 1, and then went ahead and installed the missing sets using slapt-get (t,tcl,x,xap and y). I skipped the kde and kdei sets. When I start xfce, the fonts are all messed up as shown in the attachment.
View 2 Replies View RelatedI recently finished a fresh reinstall of Fedora 11 on my ASUS EeePC 1000HA today. Once I rebooted, it asked for the usual "first time user thing" and I proceeded. After that screen, I was brought to the loging manager, so I logged in, and was presented with my destkop. I fired up the terminal, added myself to the sudoer's file and did a "sudo yum update" but was given the following error (the beginning of the text got cut off due to how lengthy the update list was): [URL].
View 3 Replies View RelatedI just installed Debian 6 & prior to my first update my sound worked fine. But after accepting all the updates based on the repositories below the system can't identify my sound card.
deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110112-01:05]/ squeeze main
[URL]
Sound Card (1st one / second is built in audio on a video card)
joe@Tux-Box:~$ lspci | grep -i audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: nVidia Corporation Device 0be9 (rev a1)
Errors (outside of just not being able to play any audio)
joe@Tux-Box:~$ alsamixer
Cannot open mixer: No such file or directory
When I try to open sound applet in pannel ->
No volume control GStreamer plugins and/or devices found.
joe@Tux-Box:~$ cat /proc/asound/cards
--- no soundcards ---
- The user is part of the audio group.
- I was playing around with run levels and if I
ctl -alt F2
log in as user
su -
password
init 5
hit reset on the computer.
When it reboots I have sound. I attempted changing /etc/inittab but after rebooting no sound. I am still unsure of what to do.
# The default runlevel.
id:5:initdefault:
# was 2 above at install - sound came on at 5
I have just installed Slackware 13.37. After the install - when executing startx for the first time, the xfce desktop freezes when its almost (?) fully loaded.
While loading I can move mouse and if I hit caps_lock the lamp at the keyboard turns on and off.
In the setup I choosed to use vesa - allthoug I afterr that even tried to boot from lilo into vga-mode.
I am, a litle rusty after have been brainwashed through Ubuntu for a few years (sigh) - so I really am not sure which config-file I should edit, and xorg.conf seems to be empty.
I have installed Suse 11.3 on my computer yesterday but since then I have been trying to update it but unable to do so. Everytime I try I get this error message: "system management is locked by the application with pid 6953 (usr/sbin/packagekitd). close this appliaction before trying again."
View 8 Replies View RelatedI have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.
An error accoured during the root filesystem check.
Installed fresh Slack 13.0 version, at 7GB virtual hdd, with cfdisk, created two primary partitions, 500 mb for swap, whats left, to second partition, made it bootable, installed full software package, used all default selections, only refused to configure network. At first restart, I got a screen with many statements, that looks like errors, and a last one, that looks like critical error.
An image I have been working on Windows my whole life and only worked with already installed linux systems a bit. Installed RedHat and FreeBSD on VirtualPC previously and succesfully. Now, I stumble upon this error and cant think of next step.
I just finished an install of Slack64 current and it's crashing when I try to start up KDE. I tried setting the VESA framebuffer to 'normal' in /etc/lilo.conf, but no dice.
Here's the log file: [URL]
GFX Card: Radeon HD 6850 (yeah I know.. this is probably the source of the conflict)
I just did a fresh install of Slackware 13.1:
However, I get 4 grub listings for Slackware.
1. leads to kernel panic.
Code:
2. leads to kernel panic but with
Code:
3.... welcome to Linux 2.6.33.4 (tty1)
4. Welcom to Linux 2.6.33.4-smp (tty1)
I have never had any trouble with grub, and consequently never had to edit much in grub.
I had to reinstall OpenSUSE after I reorganized my hard Drive partitions... I was trying to update the system when I encountered an ERROR: Problem connecting to a software origin There was a (possibly temporary) problem connecting to a software origins. DETAILS File"/repodata/repomd xml' not found on medium [URL] My repositories too seem all right.
View 8 Replies View RelatedAs the thread title suggests, I am getting error messages while trying to update a fresh install of the 64-bit desktop edition. Here are the errors:
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2316, in _update_packages
txmbr = self.yumbase.update(po=pkg)
File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 3761, in update
available_pkg, updated_pkg)
[Code]...
I've been kind of spoiled by Slackware, where updating an installation without networking is just a matter of storing all the updated packages somewhere (directory, CD, USB, etc.) and doing a:
Code:
upgradepkg *.tgz
I'm trying to figure out how to achieve similar simplicity on Ubuntu (specifically, Ubuntu 8.10). I know how to update the packages on the live CD itself (and have done it several times), but in this particular case I need to install using the unedited, official CD.
I'm currently looking at this (and will set up a VirtualBox image to try it out), but it seems to me like the actual packages are never even mentioned in the article, only the meta-data. I need to be able to do an apt-get update/upgrade on this box and have it use the updated packages which I will have stored on a mounted filesystem.
Just tried to install gnucash on a fresh install of 13.37. ALL dependencies are installed, with no errors from any. The gnucash slackbuild dies with a message that says "gnome.h, no such file or directory". All I can find is that it is and very old dependency of gnome.
View 9 Replies View RelatedAny kde app(dolphin, device notifier...) can't see my internal drive with ntfs and any connected flash drive. I've thought that this is problem with missing dependecies or hal but 'lshal -m' shows messages when J connect flash drive so i don't know where the problem is. I've installed all required and recommended and some optional packages from URL...and it has no effect. Does anybody know what i have to do to make it work.
View 2 Replies View RelatedI just installed 10.04 on an Acer 4736 laptop and was prompted for a software update of about 170 MB.
I went through with the update downloads and installation, got an error message of some packages not being found, and clicked on the "close" button on the dialogue to finish with the whole thing.
Now the Update Manager window with the grayed-out package updates didn't go away, and the cursor would always show the "busy" circle thing. I waited for a while, but nothing happened. I tried opening Firefox to check for anything about this on the net, but it wouldn't open.
So I left it alone, and it the screen went black (screensaver, I guess). When I tried to get back to the desktop, I couldn't. Screen wouldn't respond and it stayed black; no password prompt or anything.
Ctrl-Alt-Backspace wouldn't take me back to the login screen either.
Just installed OpenSuse 11.3 kde version on my laptop. After install added few repositories and updated the system. Now the whole desktop looks very polished however problem started after that. When i tried to open Dolphine, Fire fox, Terminal or for that mater any application nothing happens. None of the applications opened successfully. Then i tried to configure plasmoid widgets and for my surprise all worked fine. With this problem i can not login to opensuse desktop.
View 2 Replies View RelatedI've been a long time Debian user but now I'm working with Red Hat and I'm a bit lost. I just installed a fresh install of CentOS 5.5 on a new Dell server. Dell provides a current Red Hat 5.5 driver for mpt2sas. How do I install this driver?
The Dell instructions are not that helpful. They explain an RPM Install and a DKMS Install - what's the difference between the two?
I just upgraded to Fedora 15 this afternoon from the install DVD.
When I try to do an update with the software update app I get an transaction error:
could not add package update for upstart-1.2-4.fc15(i686)updates: upstart-1.2-4.fc15.i686
Here is what rpm reports as being available:
When I tried yumex I get a different error:
I'm getting a tad frustrated. Having gone down a dead end on this thread: [URL] I reloaded 10.10, wiping out previous install. Everything was working as it should. I then updated (today, Sept 16, 2011) When rebooted, the system went right to a grub prompt.
View 9 Replies View RelatedI ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
After a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
I have been trying to install openSUSE 11.4 on a Windows 7 laptop, but the suggested partitioning sucks and I lack the skills to do it manually. I would like to format the laptop drive, give up Windows for good and do a fresh install of openSUSE 11.4. openSUSE wants me to keep Windows boot. But I do not want it!
I have tried for an hour now. Can't format, there is no options for that in the openSUSE 11.4 install. There are expert options, but I really do not know how many partitions does openSUSE require. For some strange reason openSUSE wants to keep my Windows partitions. WHY? And if I delete all of the partitions, it wont automatically recreate the needed partitions for openSUSE, it only displays errors and won't let me continue.
For the love of God, do I have to open the laptop, remove the hard drive, put it in another computer and format there?
Why isn't there an option for removing all partitions, formatting the drive and installing openSUSE?
How to disable the forced Win 7 dual boot openSUSE offers and do a fresh install with only openSUSE 11.4 WITHOUT ANY WINDOWS DUAL BOOT BS.
By the way, since my laptops internal DVD is broken and I will not repair it until my daughter is old enough to handle optical drives, I use USB DVD and it won't give me any boot options but starts installation right away. This is also strange.