I am unable to get any audio to play. I configured alsa and checked to make sure nothing was muted. I think the problem might be KDE related but I'm not sure. Also when I restart the computer I get this error. "the audio playback device HDA intel (ALC887 Analog) does not work".
View 14 RepliesEvery time I log in, I get the following notification from Phonon: The audio playback device does not work. Falling back to RV635 Audio device [Radeon HD 3600 Series] Digital Stereo (HDMI) and of course, I get no sound.
Sound is integrated Intel HD "82801I (ICH9 Family) HD Audio Controller" (courtesy of lshw), and it did work before, it just seems to have appeared suddenly out of nowhere, I can't even tell when and whether it's connected to any updates or other configuration changes.
I finally decided to transition to a 64-bit install (AMD64). (same machine, just reinstalling as a 64-bit kernel starting w/ a Debian squeeze netinstall image) My audio chipset is nvidia MCP61, and it was working perfectly under a 32-bit kernel (I did the transition because a poorly-written system backup script (my fault) hosed /usr, /bin, and /sbin) When everything was up and running:
*: KDE4 only recognized the output device as ALC1200 Analog
*: kmix only had a single channel(master)
*: alsamixergui did recognize all the channels
*: some games (sauerbraten, for example) had no sound in KDE4.
*: some games (warzone2100, for example) did have sound in KDE4.
*: the games that had no sound in KDE4 did have sound in fluxbox.
I removed the following packages (some of which I had installed to try to get audio working properly):
[Code]....
My laptop's internal microphone doesn't work. I ran alsa-info.sh to collect data about my configuration.
Code:
Since the full info dump was a little bit too big to post here, I put the file in its entirety on Pastebin. I also noticed that KMix doesn't display any inputs/outputs...
Well, when I run alsaconf, it finds my 82801H and I go on to setting it up, it says it will run, but it doesnt run.
Quote:
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
But my song don't work, ..... works, but no sound in that, and i have tried running alsamixer to raise the volume to the peak.
I have a vague idea that, this sound card has difficulty in linux but all I get is 3 year old patches for gutsy gibbon and fixes that are non-slackware so I dont have the files and what not.
I have been trying, but never seem to understand why it says it works when it doesnt work.
Oh turns out, from thinkwiki, [url]
Its AD1984 actually, and it didn't work on 2.6.24.2 mine is 2.6.29.2 .
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies View Relatedmy sound driver keeps on crashing saying "hda intel stac92xx analog does not work". What i mean my crashing is if I get a sound of flash player in mozilla, i would not get sound from the player or a chat notification and vice versa. can u plz help me on this. here is my diagnostic report. [URL]....
View 9 Replies View RelatedSounds like a trivial thing, but how do you do it? How do you play a plain red book audio CD? I have tried xmms, audacious and mplayer. The only success I have had (if you can call it that) is with the latter, mplayer. Using the command:
Code:
mplayer -cdrom-device /dev/sr0 cdda://3 -cache 6000
I get the warnings:
Code:
Cache not filling, consider increasing -cache and/or -cache-min!
Cache not filling, consider increasing -cache and/or -cache-min!
The program plays the audio, but there is a huge latency prior to starting the playback, making it very cumbersome to change tracks and having to wait. I have tried with various cache values as well as using the "-cache-min" argument, to no avail. What values are certain to work?
As for xmms and audacious I get the errors:
Audacious: When trying "audacious /dev/sr0"
Code:
unix-io: read failed: Input/output error.
MADPlug-Message: Rejecting file:///dev/sr0; cannot read from file.
unix-io: read failed: Input/output error.
unix-io: read failed: Input/output error.
XMMS: When trying "xmms /dev/sr0": No error
It simply does nothing except starting up and not playing. My system is a 32-bit Slackware 13.1.0 on a fast x86. I have tried with different audio CDs.
I have installed the Jack audio connection kit from [URL] The two listed dependencies, libsndfile and libsamplerate are installed and everything seemed to go well, except it's not listed in the KDE menus. But that's Ok. I can start it from /usr/bin/jackd But no I can't because I get these error messages:
oot@ed:/# jackd -R -d alsa
jackd 0.116.2
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver ..creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit control device hw:0 ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to capture-only mode cannot load driver module alsa
[code]....
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies View RelatedI am having difficulty with playing back movie dvd's and audio cd's. I recieve this error from trying to playback X-Men3 in vlc. Playback failure:DVDRead could not open the disk "/dev/sr0".Your input can't be opened:VLC is unable to open the MRL 'dvd:///dev/sr0'. Check the log for details. I have libdvdcss and w32codec-all... mplayer, smplayer, vlc, xine, xine plugins...I can explore the dvd in konqueror and the vob files are reconized as files to be played. However If i click to play nothing will open/happen.
View 9 Replies View RelatedI use ubuntu lucid x86_64 with pulseaudio. There seems to be some issues with how the audio is sent to the sockets. When playing an MKV with surround sound "front" recieves none of the actors voices. it almost sounds like it is the rear sound. Centre/subwoofer sound works correctly. I also get a problem with headphones and front where I cannot mute front and allow only headphones instead I can just mute headphone socket. This is entirely confusing so I hope someone can help me in the right direction.
Hardware: Nvidia 7600 gfx P5QL-EM mobo with 8 channel surround sound audio and hdaudio/ac97 cable which is set to hdaudio on mine in both bios and physically connected cable.
[Code]...
I've setup an HTPC with xbmc, and I'd like to output the audio from the system to both my digital and analog outputs on my mother board. How do I do it? Can their be a script that duplicates the output of one to the other? Here's what aplay -l said:
[Code]....
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
I thought it was a driver issue, but after messing around with the ALSA mixer a lot, it turned out that when I enabled headphones(or disabled, honestly not sure) that my headphones worked, and when I took them out the speakers worked. Then when I rebooted for whatever reason, only the speakers(built-in) worked. Really, I'm not sure why this is.
When I got them to work there was a switch for the headphones in the graphical mixer(which is what I used, not the ncurses[?] ALSA thing), but I can't seem to find that anymore. It's not a major issue, it just puts me off watching videos and listening to music because my laptop speakers are really low quality. I'd go out to buy a pair of external speakers, but obviously with the audio jack not working, this could be problematic.
I guess I could buy USB external speakers but then the probability of Slackware having pre-installed audio drivers for a cheap generic brand of speakers is so low it doesn't justify the effort of going and buying some, nor the money that would be spent. Willing to enter any commands/w.e. I'll be on Slackware all the time 'cause I need a Linux system right now.
I've these intel 82801i, but my mic doesn't work, for skype etc.
If I compile alsa alsa-driver-1.0.9rc4a
Code:
gives:
Code:
Code:
I have a toshiba netbook, and I'm running linux slackware 13.The sound card is an HDA intel.So far I've ran alsaconf and configured the above mentioned sound card. I've also gone into the alsamixer and unmuted everything and turn the volume up.I get absolutely no audio.
View 15 Replies View RelatedI have made a custom kernel a few weeks ago, and just today the sound on everything isn't working. Upgraded alsa to 1.0.24 to try to fix and nothing... What do I need to do?
View 2 Replies View RelatedI'm trying to get skype going in Fedora 12 KDE x86_64 (fully updated). I did some testing with and without the pulseaudio server installed. With the pulseaudio, I didn't manage at all. I know I got it working before _without_ pulseaudio, but after a yum update the pulseaudio got reinstalled and the mic stopped working. Now I traced this problem down to what I think is wrong: I have a HDA Intel sound card, but 'cat /proc/asound/devices', doesn't show me any analog capture input at all:
cat /proc/asound/devices
2: : timer
3: : sequencer
[code]...
I have just gotten unbuntu install and was force to learn cuase while installing i accidently messed up the part of windows it needs to start i think on another hard drive.
i dont mind anymore. its a easy learn but now i down to the nitty gritty stuff.my audio outputs. i have a biostar board with reltek onboard audio.board model: TF8200 A2+ now i am just looking for a way to manage what one of the 6 ports do what.. like before in windows 7 with the realtek program. i could make every single on back their all fronts. or all line ins. or anything in between.
i dont really no what else to say. what ever other info you need just ask and ill reply fast.ps Ubuntu is awesome. its so slick with compiz and conky is nice to. only other problem i have now is music manager/player/mp3 sync. anyone know a good program off the top of your head?
I could effortlessly set my output in Sound Preferences to be Analog 5.1. Now I just discovered that this option has disappeared, for no apparent reason. I haven't been messing around with any settings, other than installing updates as they've been rolled out. Would be nice to have 5.1 surround back as an option.
View 1 Replies View RelatedI've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
I installed a fresh copy of Fedora 14 a few days ago. The default drivers for this device worked OK but I read on some forums that OSSV4 had improved performance/capabilities. I came across this thread on the forums which I followed. (incloded removing pulse audio) Since then I have visited almost every forum/site I can find to try to resolve my issue. I have reinstalled pulseaudio and editied almost all of the conf files I could find relating to the xfi cards.
I was worried that I may have changed a config file that I shouldn't have. I removed all of the pulse audio apps using: su -c "yum remove alsa-plugins-pulseaudio pulseaudio padevchooser pavumeter paprefs pavucontrol" and also removed the config backups so that on a new install they would be replaced. I will post any information needed to resolve this issue, my goal is preferably not to use pulseaudio and successfully be able to use my 5.1 analog audio system I am sure that the system is able to see the card, but loading the driver / sound utilities is not working.
When I try to playback a sound file in aucadity just after having played one in rhythmbox or totem or vlc (or presumably any other media player), I get the following message :
"Error while opening sound device. Please check the output device settings and the project sample rate."
When I try again 2 or 3 seconds later, playback works fine. In fact if I wait 2 or 3 seconds after having stopped playback in rhythmbox or totem before starting playback in audacity, audacity doesn't give me the error message at all. Just wondering what causes this delay (as there are no delays when I go from rhythmbox to totem or vlc or anything else).
I am using open -suse 11.1 .During start up I am getting notification such that,The audio playback device HDA intel (ALC888 Analog) does not work falling back to default.
View 2 Replies View RelatedI recently installed Ubuntu on my HP Pavilion dv4-2012br and am really enjoying it, except that it is conflicting with my sound card. The only way I can hear some sound is going into System> Preferences> Sound> Output and selecting "Internal analog stereo audio" which makes the sound hollow and not at all pleasant to listen to music. When I mark "RS880 audio device [Radeon HD 4200] Digital Stereo (HDMI)" the sound is not played.
I followed step by step these instructions: [URL] yet the only way to run the audio through the "Internal analog stereo audio. "
Just adding: I used the "Install with Synaptic Package Manager" way to do it. And i'm using a desktop version of Ubuntu.
Here are some screenshots:
[URL]
I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
Okay, when I load epsxe it loads just fine and I got it playing playstation games BUT the audio doesn't work. I have this issue with Basilisk II and it never got solved. When I load the epsxe executable I get
Quote:
I've currently pieced together a asoundrc that gives me audio via HDMI and analog so I am able to get sound both on my externally connected monitor via HDMI and my notebook's speakers. Problem is, the analog output through the notebook's speakers/headphone jack is much much lower than it can be. In Windows 7 the volume is higher at the same level.
[Code]...
my headset has a headphone jack and microphone jack.
if i go to sound preferences > Hardware (Tab) and select Profile: Analog Stereo Input, then I can record sound with Sound Recorder. but in order to be able to hear what I recorded, I then have to go back to sound preferences > Hardware (Tab) and select Profile: Analog Stereo Output.
i see there is a profile option "Digital Stereo (IEC958) Output + Analog Stereo input", but when that one is selected, i can't hear anything through the speakers..., so, still having to switch back and forth as described above. perhaps a profile option with "Analog Stereo Output + Analog Stereo Input" would work, but it is not there...
why do i have to switch back and forth? (actually, it seems this setting-switching-requirement is true of the laptop's built-in speakers and mic as well, not just the headset...)
(Everything in GNOME ALSA Mixer is unmuted and set to maximum volume. Capture is at maximum and the "Rec" box is checked...)