Hardware :: Audio Channel Output On Hda-intel Based Device?
Oct 6, 2010
I use ubuntu lucid x86_64 with pulseaudio. There seems to be some issues with how the audio is sent to the sockets. When playing an MKV with surround sound "front" recieves none of the actors voices. it almost sounds like it is the rear sound. Centre/subwoofer sound works correctly. I also get a problem with headphones and front where I cannot mute front and allow only headphones instead I can just mute headphone socket. This is entirely confusing so I hope someone can help me in the right direction.
Hardware: Nvidia 7600 gfx P5QL-EM mobo with 8 channel surround sound audio and hdaudio/ac97 cable which is set to hdaudio on mine in both bios and physically connected cable.
[Code]...
View 1 Replies
ADVERTISEMENT
Oct 29, 2010
Is it possible to convert a 2.1 channel mp3 or any video file to get a respective 5.1 file permanently so I could play them on external music system which is 5.1 speaker system. Any sites where i can usually songs n video with 5.1 channel.
View 2 Replies
View Related
Aug 7, 2009
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies
View Related
Mar 27, 2010
I finally got audio working on my ubuntu 9.10 desktop... now I am having sound issues watching movies from a network share.The sound device continually randomly changes to "dummy output device" and then there is no sound output. The sound icon dissapears on the toolbar. To get it back and audio to start working I have to $sudo alsa force-reloadIt seems to happen everytime there is a network delay, the movie will stop for a second and then when it plays the sound is gone
View 1 Replies
View Related
Dec 17, 2010
So my aim is to install openSUSEx64 11.3 onto my Macbook; but for whatever reason, upon boot-up, the system won't recognize the USB thumb drive with the expanded image of openSUSE on it. I followed steps in Terminal to expand the image onto the said USB stick and know it worked properly because Terminal said "Process Completed." Do I need a special type of USB thumb drive or am I missing something? I am using a late-2009 Macbook. By the way, these were the steps used to prep the USB thumb stick:
1. Open a Terminal (under Utilities)
2. Run diskutil list to get the current list of devices
3. Insert your flash media
4. Run diskutil list again and determine the device node assigned to your flash media (e.g. /dev/disk2)
5. Run diskutil unmountDisk /dev/diskN
6. Execute sudo dd if=/path/to/downloaded.img of=/dev/diskN bs=1m
7. Run diskutil eject /dev/diskN and remove your flash media when the command completes
View 2 Replies
View Related
Jul 11, 2011
how do you change the default audio output device if you have multiple sound cards?
View 14 Replies
View Related
Jan 29, 2011
Ubuntu 10.04 XFCE desktop.The Audio Output Device is "/dev/dsp1".When I specify this in VLC, the audio works perfectly.But when I am looking at a web page with flash, I can only see the video.There is no audio.How do you make Flash use the "/dev/dsp1" Audio Output Device?How do you make "/dev/dsp1" the default Audio Output Device for this system?
View 1 Replies
View Related
Dec 26, 2010
I finally decided to transition to a 64-bit install (AMD64). (same machine, just reinstalling as a 64-bit kernel starting w/ a Debian squeeze netinstall image) My audio chipset is nvidia MCP61, and it was working perfectly under a 32-bit kernel (I did the transition because a poorly-written system backup script (my fault) hosed /usr, /bin, and /sbin) When everything was up and running:
*: KDE4 only recognized the output device as ALC1200 Analog
*: kmix only had a single channel(master)
*: alsamixergui did recognize all the channels
*: some games (sauerbraten, for example) had no sound in KDE4.
*: some games (warzone2100, for example) did have sound in KDE4.
*: the games that had no sound in KDE4 did have sound in fluxbox.
I removed the following packages (some of which I had installed to try to get audio working properly):
[Code]....
View 2 Replies
View Related
Feb 22, 2010
Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.
View 1 Replies
View Related
Nov 8, 2010
I am unable to get any audio to play. I configured alsa and checked to make sure nothing was muted. I think the problem might be KDE related but I'm not sure. Also when I restart the computer I get this error. "the audio playback device HDA intel (ALC887 Analog) does not work".
View 14 Replies
View Related
Oct 5, 2010
Does anyone know how I can force single channel sound output? I'm deaf in one ear and want to mix the channels (especially when I need to use headphones).v
View 3 Replies
View Related
Jan 5, 2011
I am having an intel machine with linux' redhat 5.4 distro. It's superb when it comes to server making and other admin. kind of stuffs but it fails when it comes to multimedia for i am unable to configure the sound file (asound.rc), i tried various codes but it only gives sound output on 2 front speakers. i want to activate other two rear speakers and the center one as well. this is my card info Multimedia audio controller: VIA Technologies, Inc. VT8237 AC97 Audio Controller
this is what my sound files have
/etc/asound.conf --------
#Generated by system-config-soundcard, do not edit by hand
#SWCONF
#DEV 0
defaults.pcm.card 1
[Code]...
View 1 Replies
View Related
Mar 25, 2010
I have the issue that the right channel is nearly to be muted (very low gain, high distortions).
This is my scenario now:
cat /proc/version
Linux version 2.6.30-spalsh (2.6.30) (root@angel3) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Mon Dec 14 22:03:13 CET 2009
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
grep Codec /proc/asound/card0/codec#0
Codec: Realtek ALC883
I am using alsa driver snd-hda-intel
View 2 Replies
View Related
Feb 19, 2011
My motherboard is Intel DG31PR with 5.1 Realtek HD on board sound card I can't find 5.1 options on sound preferences on ubuntu 10.10... how can i setup a 5.1 audio channel...?
View 5 Replies
View Related
May 22, 2010
It seems that when I start up any video in VLC recently that it automatically opts for the left only audio channel. This means that I have to go into the audio options with every movie or show I watch and switch it to stereo mode. I was wondering if anyone knew a way to get VLC to automatically start up in stereo. The videos I have been watching have stereo audio so that is not the problem. I have worked though all of the advanced audio options and I haven't found a way to be able to set this up.
View 2 Replies
View Related
Mar 7, 2010
I installed KMplayer but I cant play video files...No video output but can get only the audio output...So how to make this work for videos?
View 2 Replies
View Related
Jan 25, 2011
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
View 3 Replies
View Related
Jan 7, 2010
I'm running Ubuntu 9.04 and I've just gotten round to updating the sound. The ALSA built in is too old to have support for the X-Fi chip used in the Forte so I built and installed ALSA 10.0.22.1. On reboot, it detects the card as X-Fi Titanium series (as expected), but when I run the test
Code:
speaker-test -D surround51 -c6 -twav I only get output from Center, Rear Left, Rear Right and LFE - i.e. the front channel is missing. I'm not sure if there are any ALSA configuration files left lying around from my old sound card (Intel HDA audio) and I've forgotton what they might be called or where they would be.
Can someone tell me the locations of the various ALSA configuration files? Or is this a known thing about the Forte? (Maybe the card has the front two channels wired differently or something) Or maybe there's a configuration option I've missed.
View 3 Replies
View Related
Jul 19, 2011
I don't know anything about ubuntu. Could you guys help me out. I'm pretty knowledgeable with windows if you guys need a printout of something let me know. My friends getting really frustrated about this. Help!!i
So here's the situation. He plugs his audio jack into his computer and then into the speakers but it still plays from the computer speakers.
View 7 Replies
View Related
Aug 6, 2010
Or at least that's what I figured, when watching videos from ....., etc., the sound in the left channel turns into distorted high frequency noise, anyone had the same issue? Is there a fix for this? Sound in other applications works just fine.EDIT: Oh, and I'm using the proprietary flash plugin, has worked just fine on my Ubuntu Studio on the exact same computer.
View 5 Replies
View Related
Aug 23, 2010
Say I have 2 speakers connected to 2 different sound cards. Under Windows, is it possible to have some sort of virtual device that would forward an audio stream to both sound cards? If this can't be easily done under Windows, a solution for Linux is also fine. lternatively, if the 2 speakers are connected to different channels of a sound card, is there any vendor-independent way to duplicate audio to both channels?
View 1 Replies
View Related
Mar 4, 2011
Is possible to have two identical sound card outputs? For example, is I want to use two headphones at the same time.
View 6 Replies
View Related
Sep 15, 2010
I have installed Tvtime and XawTv applications and I am currently trying to configure both these applications to detect my tv tuner card (pixelview play tv pro with conexant cx2388 chipset). configure both video and audio with channel scan for my tv tuner card?
View 2 Replies
View Related
Dec 19, 2010
I wonder is there a reason to run a 64-bit version on ubuntu on my laptop It's T7300 CPU, 2GB RAM - Model Sony Vaio VGN CR123E also I saw only 64-bit for AMD that's why i'm asking
View 2 Replies
View Related
Mar 11, 2010
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies
View Related
Oct 31, 2010
We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.
We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:
We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.
View 4 Replies
View Related
Dec 7, 2010
I am a new member on this site. I come from a Windows background and want to take the RedHat System Admin class. I want to install a Linux distribution on my stand alone (possible on a VM and an intel-based). My question is which one is better suited for me in preparing for the training. Should I install RHEL 5, Centos, Fedora or Ubuntu?
View 5 Replies
View Related
Jun 25, 2011
PC seems to run fine in single channel mode but monitor reports no input in dual channel mode and memtest86+ lists from 1-3 errors per pass in single channel mode. Motherboard (Gigabyte P43T-ES3G) can't be set for the 1.65 volts required by the RAM (2x2 of OCZ3P1333LV4GK PC3 10666). The mobo voltage choices are 1.6 or 1.7 volts. I have tried both and increased the MCH voltage from 1.1 v to 1.2 v, but so far can't get it to run in dual channel mode at all and single channel mode seems to run fine but I still get errors in memtest86+. Also tried optimized Bios settings and loosened memory timings (from 7-7-7-16 to 8-8-8-27 and tRFC 60 to 70) and reset Command Rate from 0 to 2. CPU is Core 2 Quad @ 2.4 Ghz, PSU is rated at 400 watts, Video card is Gigabyte GT220.
View 2 Replies
View Related
May 2, 2010
This is a fresh install of Ubuntu 10.04 on a Dell XPS M1530. I'm getting very frequent disconnects to my wireless network, despite good signal. I have wicd and nm-applet running side by side, wicd doesn't work by itself and nm-applet won't get a new IP after reassociating with the AP.
Wireless connection is steady in Windows 7, so I'm guessing it's a problem with the driver.
Wifi card: 0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
Driver:
Code:
[ 22.889588] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.32-21-generic-ks
[ 22.889592] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[Code].....
View 2 Replies
View Related
Jun 29, 2011
I'm trying to crack my wep password just for kicks, but I keep running into the same error. When I try to use airplay-ng for the packet injection, it always gives me the error " wlan0 is on channel -1, but the AP uses channel 6". I've tried setting wlan0 to channel 6 manually, but that doesn't help. I spent a while searching for a solution, but it seemed like each page had a different, usually highly complex solution, that still doesn't work. I have the most recent drivers for my wireless card, and it meets all the requirements. So, is there any solution to this that will actually work?
View 9 Replies
View Related
