Ubuntu Multimedia :: Record Sound In Kubuntu 10.04 - Default Device For Audio Recording Does Not Work
Jun 28, 2010
I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
I'm trying to record music playing on my computer with the sound recorder/audacity but there is nothing audible being recorded. I've installed PulseAudio Volume control and selected monitor of internal analog stereo. I can't figure out if I have an output/input incorrectly selected but maybe someone could take a look at the screenshots and provide feedback! I have a dell xps 8100
I posted my question on Linx.com, but have not received an answer after 75 viewers to my question: Ok my respected Linux genius. This is my project. First I have a Windows / Linux combo OS set-up! In my windows, I use the latest realtex sound driver as this gives me complete control with recording output control and Microphone gain control. In the set-up, there is a stereo mixer component with is necessary to engage the direct sound recording from my sound card. To make this all come together, I use a sound recording software [ free sound recorder 9 ] and to convert the recording to a wma, wav, or meg, I use Roxio 10 to produce audio cd's to play on all CD Players.
The challenge for me in Linux is to create the same set-up with Linux applications to produce the same professional results.Presently, my kubuntu 10.04 has Alsa sound drivers, with a version of realtek incorporated. I have the Alsa mixer software as well as Audacity as the sound recorder program. But no matter what I do, audacity depends on the microphone to record, which makes the final recording pure crap. If I lower the microphone boost or gain in my Alsa mix, then Audacity can not record the ambient sound from the speaker output and it will only recognize mono and pulse as the sound method. With the pre mention set up, Who has a set up identical to what is offered to windows that will do exactly the same for Linux. I basically want to record directly from the sound card in my Linux, without depending on using my microphone and then a CD burning program to make the conversion to MPEG or the necessary file format for the burned CD to play in all CD players, not just on a PC) I am trying to stay away from command line language in the terminal. I really need a replacement for Audacity,cause Free Sound Recorder is made for Windows Platform......I need a Linux sound Guru for the answer.I am not doing this to pirate music....I have over 3,450 music track inside my Rhapsody subscription and I like to record music for personal listening on my portable CD player and at 0.99 per track charge to do this in Rhapsody, I might as well by a recording studio and hire the singing artist.Basically in short..I need to know if there is a setting I can engage in my Alsa Mixer panel that will allow me to record directly from my sound card without using my microphone as a default. When I mute the microphone in my Alsa control panel, my Audacity program will not record using the microphone, which I do not want to use anyway. I just want to record straight from my sound card, as this eliminates all hiss, distortion that is inherited with using a microphone.
I'm trying to record some audio from 4-track cassette tapes using Audacity and a Sound Blaster mp3+ external usb audio card.I'm using Karmic.I have fiddled with levels on the sound card using alsamixer, but the only I way I can detect any sound from the tapes when recording is by turning the levels all the way up in alsamixer, and in doing this, I can faintly make out the audio beneath a large wall of static. If the levels are not maxed out, I only get static when recording in Audacity.
I can't seem to get my computer to record the audio from an application... Sound Recorder, Audacity, and outRec all output files but they are just silence, even though when I see them in a media player they show the visualizations. I have followed a couple guides to no avail.
1 i have tried to get my sound output working in totem kaffiene and banshee to no avail. reading through several blogs posts and the such of likes has gotten me to ttry and set pulse alsa and oss so im even more confused. i can get a sound test to play but cannot get music to work??
2 i would really like to use audacity to record but it keeps hanging after about three seconds. i purchased a new acer aspire 5532 and deleted windows 7 to encounter
I am having difficulty changing my default sound card in Kubuntu 11.04. I am able to use Phonon to change it for KDE applications; however, I am unable to accomplish this for VLC and Chromium.
I use an echo indigo audio card. When I do aplay -l I see this card, and I can ouput audio through it by specifically telling mplayer to use this (alsa) device. Now I want to use this card as default for all audio. At the moment the default is pulseaudio through the built in soundcard. How can I change this? Im running Ubuntu 10.04.
I'm having here annoying "problem" with my webcamera. Everytime I want to use it as a microphone it needs to be switched manually in sound settings menu. It's not a big deal but I would really rather let it be switched automatically like plug and play or something like that.
Forgive my newness, but here goes. I installed CentOS 5.5 on a Dell with a Soundblaster card. The soundcard config utility recognizes the device as: Vendor: Creative Labs Model: CA0106 SoundBlaster Module: snd-ca0106 I am able to play the default sound in the utility, however, I get no sound when I select the device in Skype as Default Device CA0106. Is there a permission somewhere I am missing, because I noticed when I try to play an internet radio stream using Shockwave Flash, I also have no audio.
On kubuntu 9.10 my sound was working fine. less than a week ago i upgraded to kubuntu 10.04.After the upgrade the sound did not work at all. i made sure that my volume was turned up and that my volume was not on mute. so far i have gotten no sound on 10.04
i am using ubuntu studio karmic and i have a digitech vx400 audio effects pedal which serves as an audio in/out midi in/out device via usb. i can sucessfully set it as the system sound device in system>preferences>sound for both input and output. but, when i play audio through it it only works for a few minutes before the sound stops completely. if i leave the system settings set to the internal sound card and configure jack audio connection kit to go to the usb device, i get the same results on the usb sound. a few minutes of playback at the most.i can restart sound with either "pulseaudio --kill && pulseaudio --start" or "alsactl init" in either situation. just requires restarting the programs. same results after restarting. i think this is alsa related as i have both the system sound and jack using the alsa driver, but i don't truly understand the relationship between pulseaudio and alsa.
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
I have a Dell Inspirion 5150. The onboard sound card was blown 3 years ago. OS is Ubuntu 8.10. I am also a HAM radio operator and use the computer for digital modes using a USB device that acts as an external sound card modem for me.
The program that I use for that is fldigi. The device is Signalink USB by Tigertronics. the device has the ability to have speakers plugged in to it. Question: Is there a way to have the computer send the audio out the USB cable to the device?
I have looked at my sound settings and there are USB devices but none of them are the one(s) that I use with my Signalink device. If it can't be done, no worries -- have not really needed it so far. Just something nice to have.
Is there any way in Debian to record streaming audio from the soundcard, after it has been decoded by a player or a browser?
Of course, the best way to record streaming audio is to grab the stream directly, but with emerging technologies, before the stream grabbers catch up, it can be difficult or impossible to directly grab a stream. The Akamai HDS format is a good example of this. The fragment packets are hard to grab individually and hard to combine. Something like [URL] .... didn't work for me.
Furthermore, as technology advances, stream grab techniques will have to play catchup.
But what normally works is capture from the soundcard, after the stream has been decoded by the player or browser. I have used Total Recorder [URL] .... on windows to do this for many years.
Is there a debian package that can capture sound from the soundcard, and save it as mp3 or ogg? And will this package run on the raspberry pi?
I recently installed Ubuntu on my HP Pavilion dv4-2012br and am really enjoying it, except that it is conflicting with my sound card. The only way I can hear some sound is going into System> Preferences> Sound> Output and selecting "Internal analog stereo audio" which makes the sound hollow and not at all pleasant to listen to music. When I mark "RS880 audio device [Radeon HD 4200] Digital Stereo (HDMI)" the sound is not played.
I followed step by step these instructions: [URL] yet the only way to run the audio through the "Internal analog stereo audio. "
Just adding: I used the "Install with Synaptic Package Manager" way to do it. And i'm using a desktop version of Ubuntu.
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
I have made a custom kernel a few weeks ago, and just today the sound on everything isn't working. Upgraded alsa to 1.0.24 to try to fix and nothing... What do I need to do?
I just installed skype 2.1 beta 2 (the deb file) from the skype website, but the only option I see under Sound Devices -> Recording is "PulseAudio Server (local)" This doesn't work for me, as the skype test calls don't actually record anything I say. I use skype a lot and FINALLY got it working under karmic, but I needed to upgrade to lucid and now it's broken.
When I open Sound preferences and look at the Applications section, Skype shows up as recording when I run its test call... but no sound is recorded? How is it possible that my sound card picks up something recording but doesn't actually record it when I'm in skype?
i have both pulseaudio and gstreamer installed, my "multimedia audio controller" claims to be a ESS Technology ES1988 Allegro-1 in the system information window and in the report i generated it says my Audio Adapter is "MPU-401 UART - MPU-401 UART" PulseAudio tells me Connection failed: Connection refused and the volume control that came with the system says No volume control GStreamer plugins and/or devices found. I am not understanding, here. do I need some driver that i don't have? i installed all the gstreamer plugins that seemed to pertain to volume that i could find. If i am not very much mistaken, I am using Debian Lenny.
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
I have a question about audio recording. I've always wanted to set up a sort of personal studio. Not anything too professional, but I want to be able to make quality recordings without too many problems. All I'll probably end up using is a midi keyboard electric guitar and bass. But what I was wondering was, is it a better idea to get a Mac for something like that, or will Ubuntu support that just fine? I know there's great software available, and I've got used to using Jack. But I've read problems about real-time kernel support and xruns with Jack and Ardour, and I'm just wondering if that's something that will make using Ubuntu for this complicated.
I want to do a screen capture with audio and video. I use Ubuntu 10.04 64-bit.I have now spend about half a day trying various tools, most of which seem to be half finished or abandoned. I have not found any usable docs for any of these.gtk-recordmydesktop and xvidcap will both capture video, but seem unable to capture audio from a microphone. The mic is connected and the sound preferences "input" tab shows the input level jumping up when I speak, so it must be working.
I tried the pulse audio device chooser app to make sure the mic is selected, but the choices for input are DEFAULT and "other", which shows a blank input with no choices.xvidcap multi-frame dialog has dev/dsp pre-selected as the input device, with no other options. It does not work.If I enable audio with gtk-recordmydesktop, it refuses to start and says it cannot open the sound card. There is no apparently no way to do this using the "advanced" dialog which has DEFAULT preselected as the audio input device and no other options. /dev/dsp also fails to start.I spent some time searching google and the forums here, to no avail. So should I give up trying to do this with Linux or is there some obscure method I only need to discover?I prefer xvidcap, since the ogg format output by recordmydesktop seems to be a write-only format.
First up, let me say this post has almost nothing to do with Ubuntu, so you may ask: Then why am I here? I am here because I didn't know where else to turn.
My main problem here is that I would like to be able to record myself playing a video game on my TV, and be able to toss the file onto my computer to edit/upload. I've heard of 'Dazzle' those TV recorder things, but I'm looking for more of a home quickfix.
What I was thinking of doing was hooking up a DVD player to a tv. Then hooking up my wii to the DVD player, to the TV. This way the game would be displayed on channel three. If I were to do this, would I be able to put a blank DVD in the drive, and set it to record channel three? Since channel three will be my game, would it record the video game? I'm sure if it would, it wouldn't be the best quality.
Can I run this camera: Quote: Bus 001 Device 007: ID 046d:0809 Logitech, Inc as something other than a UVC driven camera? It appears that UVC in 640x480 format is only available at 15 fps. I need to record at fps=30. So I can splice into existing video.
[Code]...
echo "Recording. Ctrl-C or close window to stop" Is there a driver other than 'v4l2' I can use that will give me 30 frames per second?
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
how can I adjust the volume level while recording audio playback and microphone at the same time? I managed to increase the audio playback volume with PulseAudio Volume Control (Input devices -> Monitor of Internal Audio Analog Stereo -> pressing green button "Set as fallback"), but once I click on that green button, no no microphone sound is recorded.
Details:
- using Ubuntu 10.04 LTS - recording audio with Sound Recorder - installed PulseAudio Device Choooser and PulseAudio Volume Control - Input devices -> Internal Audio Analog Stereo --> shows the sound from microphone
[code]...
- how to adjust volume of audioplayback and microphone recording and record both as a mix together? Thanks!
PS: I checked out this thread, but haven't figured out how to adjust the volumes.
