my sound driver keeps on crashing saying "hda intel stac92xx analog does not work". What i mean my crashing is if I get a sound of flash player in mozilla, i would not get sound from the player or a chat notification and vice versa. can u plz help me on this. here is my diagnostic report. [URL]....
View 9 RepliesMy laptop's internal microphone doesn't work. I ran alsa-info.sh to collect data about my configuration.
Code:
Since the full info dump was a little bit too big to post here, I put the file in its entirety on Pastebin. I also noticed that KMix doesn't display any inputs/outputs...
I have a strange problem with my audio on Linux. Some months ago I bought a new laptop (an Asus M51Vseries (M/B version M51Vr)), and now I want to install Linux on it. However, there are some problems. When I first booted up my newly installed Linux distro, Debian Lenny (kernel 2.6.26-1-686), I had sound when I tried to play movies, mp3s, etc. However, after next boot, the sound had disappeared. Nothing came out of the speakers even though everything had worked before. Nothing had changed in the mixers as far as I can tell, either. So I googled a lot and came about pages telling me I should edit /etc/modprobe.d/alsa-base and passing on a model option. Unfortunately it didn't work. I then put off the project a while, and yesterday I tried installing Linux again. Magically, sound worked again, and after rebooting, it had gone. I am at my wit's end.
When I think about it, I find it strange that sound that HAD worked, should stop working, and then start working again by passing a model=... (I tried several) in alsa-base.According to alsamixer (and yes, all channels are at the highest volume level, NOT muted), the chip is a Realtek ALC663. The Alsa version is 1.0.16.I hope you are able to help me. I really want to get rid of Windows, but I won't accept not having sound.
I've been using it since it was put on current and have been having X crash on me repeatedly or getting a black screen from which I can only recover by a hard reboot. This is happening under a couple of different WMs without compositing (so this isn't the same issue that I was having with KDE and xscreensaver).
I'm using the i915 driver with stock 2.6.37.6, but I also tried a 2.6.38.2 kernel but had the same problem with both.
Here's a backtrace (for what it is worth):
Code:
[ 10161.149] 0: /usr/bin/X (xorg_backtrace+0x28) [0x4a02d8]
[ 10161.150] 1: /usr/bin/X (0x400000+0x60fc9) [0x460fc9]
[ 10161.150] 2: /lib64/libc.so.6 (0x7fd25616a000+0x340b0) [0x7fd25619e0b0]
[ 10161.150] 3: /usr/lib64/libdrm_intel.so.1 (drm_intel_bo_emit_reloc+0x0) [0x7fd254a2eb90]
[Code].....
I am unable to get any audio to play. I configured alsa and checked to make sure nothing was muted. I think the problem might be KDE related but I'm not sure. Also when I restart the computer I get this error. "the audio playback device HDA intel (ALC887 Analog) does not work".
View 14 Replies View RelatedI got a LG notebook R580, and there is no sound at Debian with Kernel 2.6.26-2-amd64, driver snd-hda-intel[URL]
View 5 Replies View RelatedOk this is not a question but more or less a small tutorial to help those who have had just as much trouble or more in getting the intel driver + DRI working.
View 2 Replies View Relatedtrying to get ALSA running on a mainboard with onboard Intel soundchip using the snd-hda-intel driver. aplay detects no devices and amixer says: "Mixer attach default error: No such file or directory". Tried everything from the ALSA troubleshooting manual but no success... why is the card not recognized?Here is the output of a debug script I found. Up to now I just did "configure;make;make install" with alsa-utils, alsa-lib and alsa-driver...
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code]....
Wireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.
With openSuSE 11.3 the (analog) sound is very low as compared to the previous release (11.2). I have installed all I could think of like ALSA, but still no success. The installation uses the internal sound card of the M4A785-M mobo with the VIA VT1708S chipset.
View 4 Replies View RelatedI have a Gigabyte mainbord with an Intel IHC9 sound chip. When I configure it via YAST the test-sound plays fine, and when I issue:
sudo speaker-test -Dplug:front -c2 -l5 -twav
some friendly voice starts speaking as well.
But:
speaker-test -Dplug:front -c2 -l5 -twav
doesn't bring about anything sound-like.
My settings are stored at:
[URL]
I have made a custom kernel a few weeks ago, and just today the sound on everything isn't working. Upgraded alsa to 1.0.24 to try to fix and nothing... What do I need to do?
View 2 Replies View RelatedBasically what the title says.I have an ASUS P7P55 WS SUPERCOMPUTER motherboard with the latest BIOS.
View 2 Replies View RelatedI just installed ubuntu, and it seems the sound doesn't work with my sound card, it is part of the Intel ICH6 family. I don't get any output at all.
View 1 Replies View RelatedI cant install or do to work the compiz...
my driver is Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
what can i do to have all effects and working fine?
I installed a fresh copy of Fedora 14 a few days ago. The default drivers for this device worked OK but I read on some forums that OSSV4 had improved performance/capabilities. I came across this thread on the forums which I followed. (incloded removing pulse audio) Since then I have visited almost every forum/site I can find to try to resolve my issue. I have reinstalled pulseaudio and editied almost all of the conf files I could find relating to the xfi cards.
I was worried that I may have changed a config file that I shouldn't have. I removed all of the pulse audio apps using: su -c "yum remove alsa-plugins-pulseaudio pulseaudio padevchooser pavumeter paprefs pavucontrol" and also removed the config backups so that on a new install they would be replaced. I will post any information needed to resolve this issue, my goal is preferably not to use pulseaudio and successfully be able to use my 5.1 analog audio system I am sure that the system is able to see the card, but loading the driver / sound utilities is not working.
SOUND from analog Capture is out of sync in Pinnacle Studio 14.
[code]...
This problem can occur during capture from an analog capture card if CPU utilization exceeds 95 percent. To avoid this problem, configure virtual memory to be "System managed" by following these steps:
1. Choose Start -> Control Panel.
2. Open the System control panel.
3. Click the Advanced tab.
4. Click the Advanced tab.
5. In the Virtual memory box, click Change.
6. Select System managed size, and click Set.
7. Click OK.
Alright, just installed maverick, got the sound to work great on the 7.1 with pulseaudio. works great in movies, and everything else just wonderfully. the only thing i am stumped by is how to get the sound to loop from my digital input on my soundcard to my analog speakers also on the same soundcard. i know the sound feed works on the input as the makeshift VU meter/bar on my digital input in the sound preferences moves, but i can't get the sound to actually come through on my speakers.
View 1 Replies View RelatedI am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies View Relatedmy headset has a headphone jack and microphone jack.
if i go to sound preferences > Hardware (Tab) and select Profile: Analog Stereo Input, then I can record sound with Sound Recorder. but in order to be able to hear what I recorded, I then have to go back to sound preferences > Hardware (Tab) and select Profile: Analog Stereo Output.
i see there is a profile option "Digital Stereo (IEC958) Output + Analog Stereo input", but when that one is selected, i can't hear anything through the speakers..., so, still having to switch back and forth as described above. perhaps a profile option with "Analog Stereo Output + Analog Stereo Input" would work, but it is not there...
why do i have to switch back and forth? (actually, it seems this setting-switching-requirement is true of the laptop's built-in speakers and mic as well, not just the headset...)
(Everything in GNOME ALSA Mixer is unmuted and set to maximum volume. Capture is at maximum and the "Rec" box is checked...)
I use ubuntu 10.10 and for some reason the sound doesn't work. tried everything reinstalling ALSA and alsa driver doesn't even work any help, it's a toshiba satellite L505-S6946
View 5 Replies View RelatedSound works with Jaunty Jackal. Does not work with Lucid Lynx. It appears that Lucid Lynx will only acknowledge that I have a modem as a sound card. I just want to add my RealTek ALC880 driver so the sound will work. I've made sure that I have audio privileges, I made sure that nothing is muted using alsamixer. I've been looking at threads and documentation for four days just to fix the sound issue and so I can be prepared in case this 'feature' ends up being continued in Maverick Meerkat and when I upgrade I can use M.M. with minimal fuss.
View 1 Replies View RelatedI have a few issues with my new install of Ubuntu. My screen resolution doesn't go above 800 x 600 and my sound card does not work. I believe these are driver issues.
[Code]....
I have installed xubuntu 10.04 on a HP Pavilion dv1049ea and am having trouble installing the drivers for the graphics card. When installing i had to use the boot option -xforcevesa in order to get the screen working. Now that it is installed there is constant screen flicker but apart from that all other aspects of the system are working fine. In the display menu i am unable to change the refresh rate. How do i change the running driver from vesa to the correct intel driver? The graphics card is an Intel Graphics 82852/82855.
View 2 Replies View Relatedi upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
every time I want to listen music from my headphones I have to do like:
1. Main menu >> System >> Preferences >> Sound >>> Output >>>> Connector >>>>> Analog Headphones
and vice versa.
I have no experience in bash scripting and I have no idea how to find automatic solution to my problem.
The problem in pseudo-code:
Begin
if
headset plugged in front jack
then Connector := Analog Headphones
else
Connector := Analog Output
End
I was just given a computer from a coworker and installed the latest Slackware version on it. I then installed Gnome Slackbuild and installed the Nvidia driver.I've run alsaconf and it seems to run fine without any errors and unmuted all the channels in alsamixer.
View 6 Replies View Relatediv been on the beta 2 for a long time! and its working really nice but the pulse audio loves to crash it crashs flash and the computer it self like the browser and all and when ever i start skype witch i need for work it crashs and forces me to re boot witch is annoying and i hear can crash a harddrive im wondering if any one can help me! if it my sound card or ubuntu ?
View 4 Replies View Relatedok, here we go. updated last week from opensuse 11.3 to 11.4 via upgrade process.
everything is fine except that every day i wake up and sit down at the computer and go through my twitter, rss, etc., and end up going to videos or some other web site to play something - and there's no sound. sometimes there's also no sound in kaffeine.
so the first time this happened, i did some research, downloaded the s.t.a.r.t. script (which includes running the alsa-info script), and ran it, capturing all the info and put it in a text file which you can see here:
richard hack audio specs - pastebin.com
running rcalsasound restart usually crashes the flash player in my firefox 3.6.16. reloading the page then restores the sound.
in one case, closing and restarting kaffeine restored the sound.
but in every case, the next day, for three days now, as soon as i sit down at the computer, the sound is dead again.
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.