Fedora Hardware :: Xfi Titanium Sound - Use 5.1 Analog Audio System
Jan 26, 2011
I installed a fresh copy of Fedora 14 a few days ago. The default drivers for this device worked OK but I read on some forums that OSSV4 had improved performance/capabilities. I came across this thread on the forums which I followed. (incloded removing pulse audio) Since then I have visited almost every forum/site I can find to try to resolve my issue. I have reinstalled pulseaudio and editied almost all of the conf files I could find relating to the xfi cards.
I was worried that I may have changed a config file that I shouldn't have. I removed all of the pulse audio apps using: su -c "yum remove alsa-plugins-pulseaudio pulseaudio padevchooser pavumeter paprefs pavucontrol" and also removed the config backups so that on a new install they would be replaced. I will post any information needed to resolve this issue, my goal is preferably not to use pulseaudio and successfully be able to use my 5.1 analog audio system I am sure that the system is able to see the card, but loading the driver / sound utilities is not working.
View 3 Replies
ADVERTISEMENT
Mar 9, 2010
I'm trying to get skype going in Fedora 12 KDE x86_64 (fully updated). I did some testing with and without the pulseaudio server installed. With the pulseaudio, I didn't manage at all. I know I got it working before _without_ pulseaudio, but after a yum update the pulseaudio got reinstalled and the mic stopped working. Now I traced this problem down to what I think is wrong: I have a HDA Intel sound card, but 'cat /proc/asound/devices', doesn't show me any analog capture input at all:
cat /proc/asound/devices
2: : timer
3: : sequencer
[code]...
View 1 Replies
View Related
Aug 22, 2010
New Ubuntu installation with a big problem: no sound.
OS: Ubuntu 10.4.1
Hardware: HP Pavilion Elite e9150t (64 bit)
Sound card: Creative Sound Blaster X-Fi Xtreme Audio
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
[Code]...
View 9 Replies
View Related
Oct 25, 2014
I am trying to get my soundcard, Creative X-Fi Titanium HD, on my new Debian Jessie Beta 2 installation working. I can hear sound from the speakers and sound is getting recorded from my mic, but the output is somewhat connected to the input. I had the issue on my Windows installation and had to turn it down in my soundcard settings. But after playing around in alsamixer and trying to switch inputs and turning down/up the volume on different channels, I had no success fixing the issue.
Link to my alsa-info: [URL] ....
View 3 Replies
View Related
Mar 8, 2011
I have just gotten unbuntu install and was force to learn cuase while installing i accidently messed up the part of windows it needs to start i think on another hard drive.
i dont mind anymore. its a easy learn but now i down to the nitty gritty stuff.my audio outputs. i have a biostar board with reltek onboard audio.board model: TF8200 A2+ now i am just looking for a way to manage what one of the 6 ports do what.. like before in windows 7 with the realtek program. i could make every single on back their all fronts. or all line ins. or anything in between.
i dont really no what else to say. what ever other info you need just ask and ill reply fast.ps Ubuntu is awesome. its so slick with compiz and conky is nice to. only other problem i have now is music manager/player/mp3 sync. anyone know a good program off the top of your head?
View 2 Replies
View Related
Jul 18, 2010
I could effortlessly set my output in Sound Preferences to be Analog 5.1. Now I just discovered that this option has disappeared, for no apparent reason. I haven't been messing around with any settings, other than installing updates as they've been rolled out. Would be nice to have 5.1 surround back as an option.
View 1 Replies
View Related
Aug 25, 2010
With openSuSE 11.3 the (analog) sound is very low as compared to the previous release (11.2). I have installed all I could think of like ALSA, but still no success. The installation uses the internal sound card of the M4A785-M mobo with the VIA VT1708S chipset.
View 4 Replies
View Related
Dec 26, 2010
I finally decided to transition to a 64-bit install (AMD64). (same machine, just reinstalling as a 64-bit kernel starting w/ a Debian squeeze netinstall image) My audio chipset is nvidia MCP61, and it was working perfectly under a 32-bit kernel (I did the transition because a poorly-written system backup script (my fault) hosed /usr, /bin, and /sbin) When everything was up and running:
*: KDE4 only recognized the output device as ALC1200 Analog
*: kmix only had a single channel(master)
*: alsamixergui did recognize all the channels
*: some games (sauerbraten, for example) had no sound in KDE4.
*: some games (warzone2100, for example) did have sound in KDE4.
*: the games that had no sound in KDE4 did have sound in fluxbox.
I removed the following packages (some of which I had installed to try to get audio working properly):
[Code]....
View 2 Replies
View Related
Jun 12, 2010
Cannot hear any sound from the system
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 0/1
Subdevice #0: subdevice #0
View 3 Replies
View Related
Dec 28, 2010
SOUND from analog Capture is out of sync in Pinnacle Studio 14.
[code]...
This problem can occur during capture from an analog capture card if CPU utilization exceeds 95 percent. To avoid this problem, configure virtual memory to be "System managed" by following these steps:
1. Choose Start -> Control Panel.
2. Open the System control panel.
3. Click the Advanced tab.
4. Click the Advanced tab.
5. In the Virtual memory box, click Change.
6. Select System managed size, and click Set.
7. Click OK.
View 1 Replies
View Related
Nov 23, 2010
Alright, just installed maverick, got the sound to work great on the 7.1 with pulseaudio. works great in movies, and everything else just wonderfully. the only thing i am stumped by is how to get the sound to loop from my digital input on my soundcard to my analog speakers also on the same soundcard. i know the sound feed works on the input as the makeshift VU meter/bar on my digital input in the sound preferences moves, but i can't get the sound to actually come through on my speakers.
View 1 Replies
View Related
Nov 8, 2010
I am unable to get any audio to play. I configured alsa and checked to make sure nothing was muted. I think the problem might be KDE related but I'm not sure. Also when I restart the computer I get this error. "the audio playback device HDA intel (ALC887 Analog) does not work".
View 14 Replies
View Related
Aug 3, 2010
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
View 4 Replies
View Related
Oct 6, 2010
my sound driver keeps on crashing saying "hda intel stac92xx analog does not work". What i mean my crashing is if I get a sound of flash player in mozilla, i would not get sound from the player or a chat notification and vice versa. can u plz help me on this. here is my diagnostic report. [URL]....
View 9 Replies
View Related
Mar 22, 2010
every time I want to listen music from my headphones I have to do like:
1. Main menu >> System >> Preferences >> Sound >>> Output >>>> Connector >>>>> Analog Headphones
and vice versa.
I have no experience in bash scripting and I have no idea how to find automatic solution to my problem.
The problem in pseudo-code:
Begin
if
headset plugged in front jack
then Connector := Analog Headphones
else
Connector := Analog Output
End
View 9 Replies
View Related
Feb 25, 2009
I've joined this forum because I couldn't find any answer anywhere else by searching the internet. I've installed a F10 64-bit default installation (with updates until 25 Feb. 2009), using nvidia latest proprietary driver, pulseaudio, kde4, proprietary flash 10 beta 64-bit plugin with firefox. When I play music on Myspace the sound dropouts randomly each 3 to 30 seconds when using my M-Audio Delta 66 soundcard.
I'm using the same configuration in F8 without this problem. After login (in F10) and some other times I also have a Kernel failure message: ALSA sound/core/pcm_lib.c:154: BUG: stream = 1, pos = 0xaaa, buffer size = 0xaaa, period size = 0xaaa I don't know if it has got anything to do with the dropouts. There are no messages in /var/log/messages when the dropouts occurs.
[Code]...
View 3 Replies
View Related
Jan 4, 2010
I am trying to use FC12 to edit multimedia projects for my work.
Right now I just want to edit some audio in Audacity.
I switched back to Linux after a few years, because it usually is "better" than Windows.
I cannot get any sound. I installed ALSA removed and reinstalled PulseAudio and everything else I could find in a forum, to no avail.
Linux tells me my sound card is: 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
I used to be able to play MP3s but that went away in the process of all this.
Is there one solution I am missing, or do I have to change everything around depending on what I am doing?
I would like to use Linux for this but deadlines might make me go back to the dark side....
View 2 Replies
View Related
Sep 2, 2010
Trying to make the switch to Fedora. For the most part, everything seems to be working fine so far. When I first logged in, I got a message about a kernel crash (with the red siren) but I was not able to send the error report. I have since updated Fedora with the latest updates and have not seen this again yet.
The problem is that I have no sound. I have unmuted the sound in the sound preferences, and it appears to be correctly detected in the hardware tab as:
[SB X-Fi Xtreme Audio] CA0110-IBG
My motherboard is an MSI P6N Diamond with onboard sound.
When I run the lspci -v command, the following is shown:
When I go to the ALSA website and click Soundcards, I see the following:
X-Fi Xtreme Audio (PCI)
CA0106
[PCI] snd-ca0106; [ ] supported [ ] not supported
I am using Fedora 64-bit Desktop Edition. I am also using headphones, as I do not have speakers to test with.
View 6 Replies
View Related
Jun 18, 2011
I upgraded from 13 to 15 using preupgrade, and suddenly I don't have any audio / sound. I tried pavucontrol but it shows no hardware device available; alsamixer do show the hardware, though, as "HDA Intel". I attached alsa-info output. Running lspci I go this as audio device:
Quote:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
View 2 Replies
View Related
Sep 30, 2009
My wife is reluctant to move from WinXP so I started my own personal campain to promote fedora at home but my wife complains that I "spend too much time fidling with the thing(PC)" and that "it wasn't the case with WinXP" so I =was looking for ways to impress my wife with fedora's capabilities so I flashed her with compiz and dual screen using our old 52" projection tv as a DVR but rhe problem is that my daughter want to watch her DVDs and my wife want to watch a ..... video.I have a system with two Sound card one embedded on the main board and one on a PCI slot and what I am trying to achive is haveing two applications, like two instances of VLC play their sound on the souncard I select per instance, or one Sound card playing VLC and the other playing a ..... video's sound.
I have looked at pulse audio properties and it detects both of my sound cards just fine and it plays wonderfully on either but that is just it... it will pay on either but not both.I have read that you can configure pulse audio to use your second sound card as sorround or duplicate audio but the idea is dicrete audio from dicrete application. Is there such an use case already supported by pulseaudio?So there might be a solution if I disable Pulse Audio but I rather not but I'm open to either.
View 1 Replies
View Related
Mar 17, 2010
I've got a couple of odd issues in my 64bit install of Fedora 12. Firstly, I get some sound corruption when playing mp3s, video, in fact any audio. The first time a video or mp3 runs it seems fine, but for a certain time after-woods all i hear is weird static popping noises (hard to describe) with none of the original audio present. The problem seems intermittent, and can also happen when say i fast forward music of videos. I had this same issue under Ubuntu, and happens in both Gnome and KDE.I just experimented with fast forwarding an MP3. If I click some place along the progress bar it works fine. If i drag the bar it then corrupts the sound.
I also have an issue with multiple applications accessing the audio device at the same time. This is an issue I did not have under Ubuntu. The first app will work fine and play the video or music. However any other apps i start up will not do anything. As an example, if I have ..... loaded in FIrefox and have played a video, and then I load a video in the movie player on my desktop, it will not play the video until i quit firefox. I have tried all sorts of options with pulseaudio, including switching the virtual device on for multiple playback, but to no avail.I have not tried the 32bit version to see if this is an issue with 64bit and my PC.
View 3 Replies
View Related
Nov 17, 2010
I have just upgraded to Fedora 14, with some hope that a F13 kernel crash issue would be resolved. Alas, not, and I have lost audio in one of my sound cards. I am using 2 sound cards in my computer. The first one (VT 1708 on the M2V MX SE motherboard) is used for FLDIGI (ham radio program). The other one (Creative Labs SB Live!) is tied to a speaker/microphone. At some point in mid 2010, I started getting kernel crash reports (not sure which kernel version this started), and the VIA VT 1708 audio controller stopped working. The SB Live! card works fine.
From mesg, I get:
[9.181148] WARNING: at drivers/pci/pci.c:105 pci_ioremap_bar+0x2c/0x5b()
[9.181186] [<c05c36ad>] ? pci_ioremap_bar+0x2c/0x5b
[9.181194] [<c05c36ad>] pci_ioremap_bar+0x2c/0x5b
[9.181299] ALSA sound/pci/hda/hda_intel.c:2510: ioremap error
I've just pulled out the SB LIVE! card to see if it is causing the VT 1708 controller to fail...there appears to be no interaction.
From lspci -v, I get:
20:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
Subsystem: ASUSTeK Computer Inc. Device 8290
Flags: fast devsel, IRQ 17
Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
Kernel modules: snd-hda-intel
So it seems to know it's there. How to get my sound back (and get rid of this kernel crash every time I start my computer)?
View 1 Replies
View Related
Jun 5, 2011
My audio worked completely perfectly running Fedora 14. I upgraded to Fedora 15 and discovered my audio no longer worked. As far as I know I didn't change anything. I do hear random pops and clicks from my speakers every few seconds. It's a bummer because this worked out of the box on Fedora 14 without any screwing around, and now it's totally broken in fedora 15. Everything else about my upgrade has been going pretty well, but life without sound is not nearly as fun and it's frustrating to have something not work that used to work just fine.
Here is some information and things I've tried:
- Just for grins I booted from the Fedora 15 live CD and observe the exact same issue as I see when I boot from my HD (just pops and clicks out of the audio.)
- motherboard: ASUS M4A88TD-V EVO/USB3 (using onboard audio)
- lspci reports: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
- cat /proc/asound/card0/codec#0 | grep -i codec reports: Codec: Realtek ALC892 (this is what the motherboard manual lists as the audio hardware.)
- I've run pavumeter as some have suggested and I see outputs on both left/right channels when audio is playing (but still hear nothing but clicks and pops.)
- I've run "alsamixer -c 0" and verified all my levels are maxed out.
- I've opened up the sound settings dialog box and made sure the correct hardware device is selected, tried different profiles, tested left/right speakers, still no progress at all.
- I know I have the speakers on and plugged into the correct output jack, but just for fun I tried plugging the speakers into each of the other possible jacks, but that didn't help.
- lsmod (fedora 15) reports:
View 5 Replies
View Related
Dec 21, 2010
I want to run SoundRecorder (or audacity). I just want to create a small audio file. I can't seem to get the mike to record. I start the record function and expect to see changes in the "Level" indicator that correspond to sounds that I utter.
-Search of google shows lots on solutions for non fedora 14
-FAQ - no hits
-Musicians Guide is 248 pages long and I did not see a solution for this simple case.
I have installed jack-audio, audacity and dependencies.
View 3 Replies
View Related
Jun 5, 2011
I've got no sound. I'm not sure if I should post this in the hardware forum or not because i'm not completely sure that it might be hard ware. Here's the card that's in my laptop though. Raedon HD 4200 - RS880 Audio Device. And yes I made sure my sound was off mute.
View 7 Replies
View Related
Apr 18, 2010
the situation was that i had 2 fedora 12 boxen. one played flash videos with sound, and one did not! eventually i found the actual problem, and it was trivially fixed (i don't want to remember the many blind alleys i went into first...).
when i looked at
system ==> sound preferences ==> sound
and selected the 'applications' tab, i got the line:
"no application is currently running or recording audio.",
but the mute check box to the right of the 'output volume' slider at the top of the tab was unticked.
however, when i was running a flash video, i had a line:
"alsa plug-in (npviewer.bin) ..." with another mute check box on the right that was ticked! unticking this new mute check box, enabled firefox to play videos video's with sound!
View 2 Replies
View Related
Jul 23, 2009
I am trying to play sounds via : sound applet on gnome taskbar, right click: sound prefs, sound vol is set via applet at say 45%, yet I can't hear the alert sounds I am pressing such as, glass & sonar, is this common with pulse atm or a combo of that and my onboard realtek ac-97 sound chip?
View 2 Replies
View Related
Oct 1, 2010
I have installed Fedora 13 on my laptop, but there is something wrong with the sound。It just comes from both the computer and the headphone. I have installed alsa, you can see as follows:
[PDS@localhost ~]$ rpm -qa | grep alsa
alsa-lib-1.0.23-1.fc13.i686
alsa-driver-1.0.23-84.fc13.i686
alsa-firmware-1.0.23-1.fc13.noarch
report-config-localsave-0.10-5.fc13.i686
alsa-kmdl-2.6.34.7-56.fc13-1.0.23-84.fc13.i686
alsa-plugins-pulseaudio-1.0.22-1.fc13.i686
alsa-tools-firmware-1.0.23-1.fc13.i686
alsa-driver-devel-1.0.23-84.fc13.i686
alsa-lib-devel-1.0.23-1.fc13.i686
report-plugin-localsave-0.10-5.fc13.i686
alsa-utils-1.0.23-3.fc13.i686
Here are the screenshot of the sound preferences.
View 2 Replies
View Related
Nov 10, 2010
I noticed that any CPU load, while using Rakarrack guitar effects, causes the sound to distort and it generates loads of noise. This actually happens when using anything while running Jack audio. If I'm recording, I get tons of noise on the recorded track when I play it back (and live when monitoring) because any CPU usage seems to interfere with the signals. It even does it live in the playthrough (monnitor).
I realized it had to do with CPU usage when I noticed a pattern with the noise correlating to the plasma CPU monitor widget I had running originally. The noise refreshed when the monitor did. Since then, I noticed that anything that puts a slight load on the system will cause this disruption (even moving a window around, or anything in the background processes).
Anyone who is experienced with Jack audio, and possibly rakarrack as well, know the cause to this? I figured loading a low resource WM and eliminating unneeded processes can help but it doesn't since the recording program itself, while recording, is enough to cause this problem. (I know this because playing the guitar in Rakarrack, without recording and just using Jack to run the sound to the speakers, doesn't have constant noise but when recording, there is a constant noise)
View 9 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
