Slackware :: Failed To Initialize NVIDIA Graphics Device On Startx With Slackware 13.1
Aug 24, 2010
I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.
View 14 Replies
ADVERTISEMENT
Jan 3, 2011
when i start uubuntu it automatically goes to tty with out letting me login. then when i press startx it says:
NVIDIA: failed to initialize the nvidia graphics device pci:0:13:0
nvidia: please check your systems kernal log for additional erroe
nvidia: messages and refer to chapter 8
nvidia: failed to initialize the nvidia graphics device!
nvidia: screen found, but none have a usable configuration
fatal screen error: no screen found
right before this i had activated a nvidia graphics device
View 9 Replies
View Related
Aug 7, 2010
I've been having a recurring problem on Slackware64 13.1. If I open VLC (or any other media player available for Slackware) before I open Firefox, then my sound works 100% and there's never any problem, however, if I open Firefox first, and there happens to be a flash video loading, then any other media player (mplayer-plugin, Amarok or VLC) will fail to play sound. VLC tells me:
Quote: Potential ALSA version problem: VLC failed to initialize your sound output device (if any). update alsa-lib to version 1.0.24 or higher to try to fix this issue. Now, I'm happy to do that if it will actually fix the problem, though I'll have to figure out how seeing as I'm something of a n00b. The thing is that I've not really done anything to alsa except run alsaconf on my first boot, so I'm not sure if that's really the problem I've been using Slackware64 for a few months now, I'm on my first ever install and for the most part I'm loving it. Been working through the little things that have been annoying me, and for the most part I've managed to find solutions either by reading the Slackbook, by browsing LQ or by doing a quick Google search. However, I can't seem to find any reference to this specific problem anywhere and I'm not sure what I should do.
View 14 Replies
View Related
Apr 7, 2010
I just finnished my slackware upgrade to current (as you may know from my previous post), and now i am facing another problem.When i type startx i get error:Failed to initialize the GLX module,...,try reinstalling the NVidia driverno screens foundOkay, i thought i should reinstall the Nvidia drivers..And then when i ran the driver install file, i got another error:Unable to load the kernel module 'nvidia.ko'....Kernel module load errorWhat should i do now ? Nothing works! New kernel
View 6 Replies
View Related
Aug 13, 2010
I'm just about to install Alien Bob's multi-lib packages for Slackware64. Everything looks easy, but I've got a question about this part of the instructions:
Quote:
After installing the -compat32 packages, you may have to re-install your binary Nvidia or Ati video X.Org drivers. These driver packages contain both 64bit and 32bit libraries to be maximally useful on a 64bit multilib OS. If you installed the driver files for both architectures, the mesa-compat32 package will overwrite some of the 32bit library files.
On the other hand, if you originally only installed the 64bit driver libraries for your Nvidia/Ati card, it is recommended after installation of the multilib packages, to re-install the binary driver package. This time, choose to install the 32bit driver files as well.
The graphical 32bit applications that you are going to run on your multilib installation will require these 32bit driver libraries. Crashes are likely to occur if you fail to install the correct files.
Right now, I'm on pure 64-bit Slackware64-13.1, and I'm using the Nvidia driver from Slackbuilds.org (along with the nvidia-kernel and libvdpau packages from there too).
So:Do I have both 32- and 64- bit bindary drivers installed as part of the package from Slackbuilds.org?
Could I avoid all this hassle by simply not installing the mesa-compat32 package?
If I do need to reinstall the Nvidia binary driver, do I just upgradepkg --reinstall nvidia-driver-195.36.15-x86_64-1_SBo.tgz?
View 14 Replies
View Related
Apr 15, 2010
I am using nvidia fx 5500 graphic card and still have unresolved problems with graphic. At this moment I cannot set X window system to work properly. My first attempt after installing slack -current was to install nvidia's 'blob' driver. As it is know 'blob' conflicts with 'noveau' open source driver for nvidia cards. 'Blob' cannot install with noveau running. Thus I blacklisted 'noveau' and installed the 'blob'. After I restarted the computer it seemed it is Ok, but 1) it is really very hard to set the proper value of gamma correction, contrast and brightnest, 2) after logout the X server didn't restart and computer was 'dumb'.
I have some prerequisites to suspect the 'nv' X.org native driver for bugs, but I tested and driver is ok, however it is impossible to work wit this driver, it can only accomplish 60 Hz V. refresh,
[Code]...
Additionally: in fact I have to graphic devices - nvidia on AGP and VIA graphic onboard card (VT1344). BIOS points to AGP as primary graphic device.
View 10 Replies
View Related
Jul 30, 2010
I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:
Code:
(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[code]....
Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?
View 2 Replies
View Related
Jul 23, 2011
when i use the command startx my slackware goes to kde but when use X deos not. what is X command or whow i can make my X open kde with it
View 10 Replies
View Related
Apr 28, 2010
After installing "nvidia-driver" and "nvidia-kernel" through "sbopkg" I ran "glxinfo | grep -i nvidia" as user (not root) Shows: "Xlib: extension "GLX" missing on display ":0.0". GLUT: Fatal Error in glxinfo: OpenGL GLX extension not supported by display: :0.0" I'm really sure that there is a problem with this or error instead. Or is there any other way of installing nvidia..? "uname -a" "Linux purple 2.6.29.6 #2 SMP Mon Aug 17 11:58:18 CDT 2009 x86_64 Pentium(R) Dual-Core CPU E5300 @ 2.60GHz GenuineIntel GNU/Linux"
Quote:
Linux is not user-friendly. It _is_ user-friendly. It is not ignorant-friendly and idiot-friendly.
View 27 Replies
View Related
May 5, 2011
I have 2 NVIDIA card intalled - GT 240 and Geforce 9500.After updating by repo kernel to ver 2.6.37.6-0.5.1 and Nvidia driver by to ver 270.41.06 X server cant start
Part of X server log
347.737] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:2:0:0. Please
[ 347.737] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error
[ 347.737] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the
[code]....
So for now only dismounting one of cards gives working X server.
View 7 Replies
View Related
Oct 20, 2010
I have a Slackware 13.1/64-current system running the 2.6.35.6 kernel that I have installed the most recent nvidia drivers for (as of yesterday or day before) 260.19.12. If I boot up into run level 4 after running nvidia-xconfig in a console and run glxinfo as root I get:
Quote:
bash-4.1# glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
If I edit /etc/profile or /home/username/.bash_profile and add the following:
Quote:
export LIBGL_ALWAYS_INDIRECT=X
I have set both X=0 and X=1 as reported by [URL] I get the screen of information except it says
Quote:
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
my lspci -v for the graphics card looks like this:
05:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8500 GT] (rev a1) (prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device 2353
Flags: bus master, fast devsel, latency 0, IRQ 16
[code]....
I am sure I missing something from my xorg.conf but at this point I am not sure what I have been searching on this for days to no avail. From the log the only thing that looks like is a problem is it doesn't load the keyboard and mouse but it gets loaded later on in the file.
View 13 Replies
View Related
Oct 3, 2010
Every time I start up my Ubuntu 10.04 install, instead of the graphical login screen, I get an error dialog stating the following:
Code:
Ubuntu is running in low-graphics mode. The following error was encountered. You may need to update your configuration to solve this.
Also in the dialog are several lines of text:
Code:
(EE) <date and time> Failed to initialize the NVIDIA kernel module. Please see the system's kernel log for additional error messages and consult the NVIDIA README for details. ***Aborting*** Screen(s) found, but none have a usable configuration.I'm not sure what it means by "kernel log," or where any error logs might be saved. Any tips? Perhaps if I can find such error logs, posting them will help diagnose the problem.
If it matters, I have 2 monitors, an NEC AccuSync 120 CRT and a Samsung BX2440X LCD. I use them in Xinerama mode with the Nvidia drivers under my Ubuntu 9.10 install and have no problems there. To get normal graphics under 10.04, I have to start up in low-graphics mode, kill X server, reinstall the Nvidia proprietary drivers, and restart the X server. Then I have to do it all over again after the next restart, every time I want to run 10.04.It's very annoying.Also possibly relevant: I use the latest 32-bit Nvidia drivers for 10.04, version 256.53.I've found a few other threads where people had problems similar to this, but nothing exactly like my situation nor any real resolution so far. I hope it can be fixed, because there are other things about 10.04 that I really like.
View 4 Replies
View Related
Feb 15, 2010
64bit Slack doesn't recognize my ethernet device. ifconfig -a show no eth0. It's an onboard nvidia MCP55 ethernet nic. Never had this problem using 32 bit Slack.
When I try to modprobe forcedeth I get the following error:
repeats those two statements 3 times
I just recompiled my kernel with every possible 10/100 ethernet device included in the modules. Still no go.
View 3 Replies
View Related
Mar 25, 2010
I'm running ubuntu 9.10 64 bit (2.6.31-20-generic) on a Z600 HP. My graphics card is Nvidia quadro NVS450. I am using the Ubuntu Nvidia driver 185.18.36. I am experiencing random, daily system freezes where the system has to be manually rebooted. After installing the crash dump packages I am now getting a crash dump file and it's clear the problem relates to my graphics card.
Is this a red herring or the cause of my problems:
(EE) Failed to load /usr/lib/xorg/modules/extensions//libglx.so
(EE) Failed to load module "glx" (loader failed,
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
The NVIDIA X Server Settings shows a message "Failed to query the GLX server vendor".
Here is my xorg.conf file:
$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009
Section "ServerLayout"
[Code]...
View 2 Replies
View Related
Aug 17, 2010
I have had this error for way too long. This post will be done in parts. I've had it for months now and I'd like to solve it. Every suggestion on linux forums, ubuntu forums, or some XYZ-linux blog seems to either work for just one boot or none at all. since I have updated my kernel on several occasions, I have also re-installed my NVIDIA kernel module by downloading the run file from NVIDIA's website. It also follows instructions from this post. I have installed the linux header files and the xorg-dev files from repository
I have also tried this.
My hardware (Alienway m17x - VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 260M])
Code:
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Flags: bus master, 66MHz, fast devsel, latency 0
[Code].....
View 3 Replies
View Related
Jul 8, 2010
my sound works when i boot up but as soon as i play a couple of files with VLC video or audio it doesn't matter the sound stops and comes up with an error saying: ALSA version problem:VLC failed to re-initialize your sound output device. Please update alsa-lib to version 1.0.22 or higher to fix this issue.Potential ALSA version problem:VLC failed to initialize your sound output device (if any).Please update alsa-lib to version 1.0.23-2-g8d80d5f or higher to try to fix this issue. I found latest version on net and installed and yast said install fail version already installed my sound device is HDA Intel (ALC C880 Analog)
View 1 Replies
View Related
May 1, 2010
I keep getting a warning messaged almost every time I reboot about Ubuntu running in low-graphics mode on a Macbook 5,1. This has been happening since Lucid Beta 1.
Quote:
Failed to initialize the NVIDIA kernel module. Please see the
system's kernel log for additional error messages and
consult the NVIDIA README for details.
[code]....
After I finish loading in low graphics mode I have to run "sudo nvidia-xconfig". Then, the next reboot the graphics card driver is loaded properly. Is anyone else experiencing this problem or have an idea how to correct it? I know it is a long shot, but do you think doing a fresh install of the stable release would work?
View 3 Replies
View Related
Jun 12, 2010
This problem has bothered me in both my previous install of 10.04 and my current one. Intermittently, booting into ubuntu results in ubuntu running in low-graphics mode, informing me that the Nvidia kernel module has failed to initialize.Running nvidia-xconfig does not help. Removing and then reinstalling the nvidia driver in Hardware drivers does not help. I experience the issue with both the 173 and current drivers.I love ubuntu, but this is making me seriously consider exploring other distros. Perhaps this not a bad thing - after I return from this exploration,
View 1 Replies
View Related
Feb 26, 2011
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies
View Related
Aug 9, 2011
I am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.
There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message:
"Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."
View 1 Replies
View Related
Oct 9, 2010
I started a thread asking for advice in the hardware forum. I didn't want to post a duplicate thread, but I was unable to get it moved here, so I'm kindly asking you slackers to help me install the aforementioned driver.
View 1 Replies
View Related
May 19, 2010
As Pat stated in the Changelog, Slackware-13.1 don't ship the nouveau X driver (yet).But it's not hard to get it either.
1. Upgrade your kernel to 2.6.34
2. Get and install the driver:
Code:
git clone git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/
cd xf86-video-nouveau
./autogen.sh
make
[code]....
PS. There is no source tarball yet for this driver.If you want to upgrade:
Code:
cd xf86-video-nouveau
git fetch
git rebase origin
[code]....
View 12 Replies
View Related
Sep 13, 2010
i've added a user using
useradd turf passwd turf and so on.. after loggin, i can't startx..
View 5 Replies
View Related
Apr 28, 2011
I did a fresh install of Slackware64 13.37. All went well. I download the latest Ati video drivers, 11.4, and build the slackware package. Install, and run aticonfig --initial all good. But when I run startx I only get a black screen
View 13 Replies
View Related
Mar 3, 2010
I'm running Slackware current, and just did a slackpkg upgrade. I can't startx. I get the following:
FATAL: Error inserting i915 (/lib/modules/2.6.33-smp/kernel/drivers/gpu/drm/i915/i915.ko): Invalid module format
(EE) intel(0): No kernel mode setting driver detected.
(EE) Screen(s) found, but none have a usable configuration
View 14 Replies
View Related
Jun 23, 2011
ive used ubuntu and fedora before, but i asked around for the "best" linux distro and they told me slackware or archlinux so i desided to pick slackware ive installed it and when im in the console mode its the swedish keyboard settings, that i choose in the install but when i go into visual mode startx i dont have the swedish keyboard so i was wondering if eny of you know how to change it
View 3 Replies
View Related
Jan 28, 2010
Thing is : I have an Install DVD created from current with the script from AlienBob about two months ago, I use it as my "default" Slackware64 13 install.
I had my drivers working ( KO modules loaded in kernel 2.6.29.6 ) I had to build for Broadcom Wireless and Nvidia GPU. Today I decided to make an upgrade w slackpkg, blacklisted kernel kernel headers, and everything pertaining to it. Still the damn thing installed 2.6.32.x. anyway, ran lilo to take notice of the change, and rebooted. booted allright, only when i Init 4, it failed to startx. new kernel, new mods needed to be loaded, i picked my DVD with drivers, and tried to run the Nvidia proprietary installer...
It uninstalled the previous driver and started compiling a new kernel module..I had the previous DVD installer of Slackware64 Current, as well as my private repo of packages, either built by me with src2pkg or makepkg, or from slackbuilds, I had my /home partition mounted apart, so i regenerated my system in about one hour...
View 5 Replies
View Related
May 27, 2010
Just installed Slack-13.1 and it looks really good. At least as root. Problem is, I create a normal user, and when I log in as the user, startx just gives me a black screen.
View 2 Replies
View Related
Jan 14, 2010
Having slackware 13 after executing startx it gives me white screen. Heres log:
Code:
kephald starting up
XRANDR error base: 159
RRInput mask is set!!
RandRScreen::loadSettings - adding mode: 59 1024 x 768
RandRScreen::loadSettings - adding mode: 60 800 x 600
RandRScreen::loadSettings - adding mode: 61 640 x 480
RandRScreen::loadSettings - adding crtc: 57
RandRScreen::loadSettings - adding output: 58
Setting CRTC 57 on output "VGA" (previous 0 )
CRTC outputs: (58)
Output name: "VGA" .....
ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error)
"akonadiserver" crashed too often and will not be restarted!
No battery found.
This is not a laptop, quitting ...
<unknown program name>(26219)/: Communication problem with "korgac" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." "
QProcess: Destroyed while process is still running.
Graphic card is intel 82865g
Video driver installed is 2.9.0 from robby workman,
Kernel is 2.6.32.3 generic
View 9 Replies
View Related
Jan 27, 2010
I recently installed Slackware 13. But every time I run startx I get my XFCE screen & it hangs up. Command line works absolutely fine.
View 6 Replies
View Related
