what would be the simplest way to find out device IP address? I don't know its factory set address, so my plan is to connect laptop directly to it with ethernet. it should respond to ping.
View 7 Replies
after a yum update on my CentOS 5.3 I got this error when shutting down eth0 on reboot...
Shutting down interace eth0: Device eth0 has MAC address XXX instead of configured address XXX ignoring [FAILED]
If I give "ifconfig" in my laptop I get eth0,lo,wlan0.In that where do I find my Ip address in Ubuntu in 10.04. In eth0 I dont find inet address.Where can I find it?
View 2 Replies View RelatedRecently, I created a device sc0 through device mapper. The divice could be found in /dev/mapper/sc0. My problem is that the device doesn't exist in /dev/partitions which will block my following test.BTW, I found dm-0 in /dev/partitions. Is it the same as /dev/mapper/sc0? But the device /dev/dm-0 doesn't exist!
View 2 Replies View RelatedI've bought an X10 Home Automation USB interface: the CM15.
This is the information lsusb gives:
skerit@KIP-DU-SKER:~$ lsusb Bus 008 Device 002: ID 0bc7:0001 X10 Wireless Technology, Inc. ActiveHome (ACPI-compliant)
But this tells me nothing about where the device file is! How can I find that, or create one myself?
I am trying to find out the mac address of the eth0 port on linux probe. This port is controlled by kernal and hence I don't have control over it. How do I find out the mac address of this port ? Is there any system call which will take the ip address and will do the lookup on the linux's ip table to get the mac address ?
View 6 Replies View RelatedI just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
How to set the ip address to particular device(ethernet device)
View 2 Replies View RelatedHow to set the ip address to particular device(ethernet device)
View 4 Replies View RelatedI am trying to use the printer port. But, I get this
Code:
Broadcom EJTAG Debrick Utility v1.6r-hugebird
Failed to lock /dev/parport0: No such device or address
johnh@tux:~/Ubuntu One/hh$
run from johnh I permission denied sudo-ing I get above.
I have a 2nd ethernet card in my system that I use to share my internet connection. eth0 is connected to the internet, and eth1 is used for my 2nd computer to connect into. Whenever the 2nd computer is turned off, eth1 forgets its ip address, then when then 2nd computer is turned on, it can't access the internet until I reset the ip address on eth1 ("ifconfig eth1 up 192.168.1.1). I only see this behavior under ubuntu 10.04, not the previous distro that ran on this box, slackware 12. How do I keep eth2 from forgetting the ip address when no computer is attached?
View 6 Replies View Related[root@servers guest]# /bin/mount -o -uid=root,gid=root,username=userid,password=user1passwd //172.16.1.212/backup/user1backup /mnt/tmp
retrying with upper case share name
mount error 6 = No such device or address
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
[root@servers guest]#
I also tried:
[root@servers guest]# /bin/mount -t cifs -o -uid=root,gid=root,username=user1,password=user1pass //172.16.1.212/backup/user1backup /mnt/tmp
but no luck!
Ubuntu was a good choice for free server O/S. I am currently downloading it. My ISP wants to bind my static IP to a MAC address of the device that will be making my connection for me. Should my server be behind my router or in front of it? I kinda wanted it to be the access point and be able to monitor the usage from all the terminals in my house. We have 4 other PC's, a laptop and a PS3. My server is a Acer Altos G530 with 3.2 Xeon Processor, 4 gb of ECC DDR,
View 7 Replies View RelatedI am trying to perform VM cloning using KVM in a centos 5.6 machines. I copy the memory contents of a running vm to an external state file and try to use that to start another VM in a different machine. While starting the cloned VM I provide a different mac address but once it resumes it has the old one . I tried changing the mac address in ifcfg-eth0 but I get the error: Device eth0 has a mac address xx:xx instead of configured xx:xx.Ignoring .
Is there some way to change the ip/mac of the cloned vm without the need to restart the VM ( Then the purpose of cloning will be defeated). Thanks a lot for the info.
Slackware 10.2. My usb ports work fine when used directly. When I insert a USB hub to duplicate a port I get the message USB device not accepting new address=2 error=-71
View 1 Replies View RelatedIs it possible somehow to block some bluetooth device with specif address (mac) ?
(like iptables block by mac)?
I have configured DNS on ubuntu server 8.10 and it is working fine. There is one question I have though. Everytime I ping a LAN device by name I get the reply from the server with only the IP Address.
View 2 Replies View RelatedLast night, OSSEC sent me some warning emails related to bad hard disk:Code:Apr 3 20:26:58 207 kernel: sd 0:0:0:0: SCSI error: return code = 0x06000000
Code:
Apr 3 21:57:52 207 kernel: EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode block - inode=299533439, block=599064613
[code]....
We�re experimenting with deploying SUSE 10 SP3 systems and adding them to a Windows domain and DNS. Oddly, when we register in DNS, it gets registered under two address: the real IP address, and the address 127.0.0.2. Also, an ip addr command shows that the loopback device lo has two addresses: 127.0.0.1 and 127.0.0.2.
The above behavior is just on SP3. On SUSE 10 SP2, the lo device has only the 127.0.0.1 address, and the system is able to register correctly in DNS.
Do you know what the 127.0.0.2 address signifies, or how to get rid of it?
is this normal to see in dmesg multiple times after booting (screenshot)
Code:
lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I have an LTO-3 tape drive.
It shows
Code:
when I do:
Code:
I am running as root
Would like to NOT reboot this server. (WEBSITE) It is running Red Hat Enterprise Linux ES release 4 (Nahant Update 8)
Found a raw device for my card when reading through the /proc/partition list but got a "no device" message when mounting the card - mount -t vfat /dev/sda1 /var/card though there is sda in the list.How to know if sda1 exists?
View 1 Replies View RelatedUnfortunately accidentaly I disconnected my usb drive my computer and my VMs run from so I just rebooted for a quick fix Now I can't open virt-manager locally and the VM's can't get network connections I see this in the logs after the last two reboots
Code:
grep lxc /var/log/messages |tail -n 2
Jan 7 00:45:04 F820 libvirtd: 00:45:04.524: warning : lxcStartup:1895 : Unable to create cgroup for driver: No such device or address
Jan 7 11:52:53 F820 libvirtd: 11:52:53.325: warning : lxcStartup:1895 : Unable to create cgroup for driver: No such device or address
[code]...
I tried restarting libvirtd after with no love so I rebooted and cgroup was gone this was a clean install of F14, after this started I brought the system current, I can provide the packages installed but they errors didnt change
I'm running 9.10. I was installing ALSA so that I could run my EMU 1616, and when I tried to go through the steps to install, I'm running into two errors that I've noticed so far. I think. Anyway, the first is that is states that the panelw library isn't there, and that alsamixer: function snd_ctl_open failed for default: No such device or address. The alsamixer one is really odd, since it's there, but I don't know why it won't run.
I initially had it running, and now it isn't. I've yet to get sound out of my EMU. the terminal window also tells me that it can't find the snd_emu file, even though it exists on the computer as well. I need an answer for a dummy.
I need to find mac address when i know the ip of one client ( for example ). How can I do this ? ( Command )
View 9 Replies View RelatedI want to know how I can investigate...
Q1- what IP address somebody has in the same network?
Q2-Is there any command I can use to figure that out?
I have a Brother MFC-5490CN AllIn One on a LAN and I need to know it's IP address.
How do I find the address?
Is there any linux command to find out the BMC Controller's mac address? The tools like ipmitool provide ways to configure IP to the lan of BMC controller, but our goal is to find out the MAC address automatically using some commands/tools.
View 1 Replies View RelatedUsing linux, how can I find out the IP address of a computer based on its MAC address?
View 1 Replies View RelatedI am setting up a server on a Intel Nuc PC. I have a problem though. I cannot get it to find a IPV4 address.
View 14 Replies View Related
