I've just installed a vpnagent on my Slackware 12.2. A script running the vpnagent daemon is /etc/rc.d/init.d/vpnagent_init. My network is started with rc.inet1. The queston is at which point during the startup to run "vpnagent_init" script. I thought to add a call to rc.locale.
View 1 RepliesI decided to use my old computer for torrent downloads and perhaps for mirroring the slack -current. However, the computer is rather weak: Celeron 1,2Ghz, 256 MB RAM. So, which slack release is better to use? I aim to use the jfs file system, but I'm not sure it is good choice.
View 4 Replies View RelatedI'm Linux beginner. I have cisco vpnclient always down I need to run it automatically when it is down.
View 1 Replies View RelatedCisco vpn client would freeze the system. The only way to recover is to do a hard reset. The funny thing is I had it working before, so it may be random. However, it just happened 3 times in a row and I haven't tried again. I'll try again tonight. I'm pretty sure I'm running the latest client for 64bit linux systems. I'll confirm that when I get a chance, as well as my kernel.
View 7 Replies View RelatedIn order to gain access to my university network remotely I was asked to open a website that would act as a gateway. Upon opening the site I was asked to run a Java application, which installed a Cisco AnyConnect VPN client on the system. However, now I do not need this, but I cannot find a way to uninstall it. It does not appear in the Synaptic Manager or the the ubuntu Software centre, so I cannot find the package to uninstall it. The software does appear in the 'Internet' section in the Application drop down menu and runs without the need of Firefox. I read the Cisco release notes but I could not find a way to uninstall the software.
View 3 Replies View RelatedAny updated guides anyone know of that works with Ubuntu 10.10 to get Cisco VPN Client (not Anyconnect) working with the latest version of Ubuntu?
View 4 Replies View RelatedWell I right clicked on the icon on my desktop and by accident when I wanted to copy the command the starts the program i pasted something else on top of it! What I am trying to find out now is what the command is to make it work again. I got so far /opt/cisco/vpn/ but im missing the last part.
View 1 Replies View RelatedI'm trying to install the Cisco VPN client on Ubuntu 11.04, kernel version 2.6.38-8 generic-pae. I need a step by step process since I am an absolute beginner with Ubuntu and this is my first install on the operating system. I have already tried the network manager but connection always fails. I have also tried the website [URL] but this always fails, seems this was made for earlier versions of Ubuntu and earlier kernel versions.
View 9 Replies View RelatedI am looking for a softphone that I can connect over a client VPN to my cisco uc520. It works great in windows. Does anyone know of one that works? Cisco doesn't seem to have one that runs in linux.
View 3 Replies View RelatedProbably there is bug in kernel used FC11 [url] This bug freeze computer after ping or other data sending over VPN connection.
Is there any chance to backport this patch to kernel in FC11?
More about this in topic:[url]
I need Cisco AnyConnect VPN client for Ubuntu. Where can I download it? Please give me the link.
View 5 Replies View RelatedWhen I try to connect to my company's VPN using the Cisco VPN client, I get a kernel panic. Please don't suggest I should Cisco's client, it only works with Kernels older than 2.6.24 (I have 2.6.35).
So I use vpnc. The error message is:
Quote:
$ sudo vpnc
[sudo] password for phirt:
Enter password for user@group@fubar.net:
received notice of type (ISAKMP_N_NO_PROPOSAL_CHOSEN)(14), giving up
vpnc: quick mode response rejected: (ISAKMP_N_INVALID_MESSAGE_ID)(9)
this means the concentrator did not like what we had to offer.
Possible reasons are:
[Code]...
I have got different clients with different SOHO routers on sites (Netgear , Linksys, SnapGear,etc.) All those clients use VPN IPSec . As you know that those routers has many entries :
Tunnel name
key lifetime
Preshared Secret
Phase 1 proposal
Phase 2 Proposal etc.
I am trying to familiarize myself to use different VPN clients (a piece of software ), that will be installed on clients, laptops to access their work network from home. I came across a problem with Cisco VPN client V5.0.06 I could not find all the above entries. I know Cisco devices are proprietary, does that mean cisco vpn client is not compatible with those router?
I am trying to install this vpn thing for school (I need to access some of my info). I seem to get to the installation part somehow but I keep getting this message
Making module
make -C /lib/modules/2.6.31-17-generic/build SUBDIRS=/home/mblack3/Desktop/vpnclient modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-17-generic'
CC [M] /home/mblack3/Desktop/vpnclient/linuxcniapi.o
/home/mblack3/Desktop/vpnclient/linuxcniapi.c:12:26: error: linux/config.h: No such file or directory .....
In order to gain access to my university network remotely I was asked to open a website that would act as a gateway. Upon opening the site I was asked to run a Java application, which installed a Cisco AnyConnect VPN client on the system. However, now I do not need this, but I cannot find a way to uninstall it. It does not appear in the Synaptic Manager or the the ubuntu Software centre, so I cannot find the package to uninstall it. The software does appear in the 'Internet' section in the Application drop down menu and runs without the need of Firefox. I read the Cisco release notes but I could not find a way to uninstall the software.
View 5 Replies View RelatedI just got DHCP working, but I need to add a "Pre-Defined Option" for the Cisco VoIP network here. At least that's what it's called in Windows. This "Pre-defined Option 150" is necessary on Windows dhcp servers tied to Cisco VoIP networks, but I have no idea where to start getting that set up in Fedora.
View 3 Replies View RelatedI'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
I was given a Cisco IP Phone (model 7962) and CyberGuard Firewall/VPN (model SG300) from my company. So that I can work from home. But I've been struggling for the past couple of days trying to get it to work. The phone successfully configures it's ip; but it hangs on "Registering".
The setup is such:Cisco phone plugs into the CyberGuard and gets assigned a private IP address; 192.168.48.34; from the CyberGuard.
CyberGuard plugs into my Slackware (12.1) box and gets assigned a private IP address; 10.0.0.191; from the dhcpd server on my Slackware box.
Slackware box then masquerades that 10.0.0.191 into my static public address on the internet.
Port 1723 (PPTP) is open in the iptables firewall on my Slackware box. I've also tried disabling the firewall (ie opening all ports) on my Slackware box.
On my Slackware box; via iptraf; I can see traffic between my Slackware box, the CyberGuard, and my company's server.
Traffic such as:
Code:
And on the company's server; the following is observed:
Code:
My company just keeps saying "open port 1723 + 47". But as I stated above; I have opened them. And Internet searches have revealed absolutely nothing. At this point; I am completely lost as to what may be wrong.
Any guide which describes setting up a vpn connection on Lenny using the command-line and NOT the gui?
I assume "aptitude install network-manager-openvpn" is the package I'll need but what files nor how to configure them.
I want to configure a conncetion to ipvanish.
How can i set-up L2TP client on my ubuntu-11.04? There is no such option in my vpn connection types.
View 2 Replies View RelatedI am using VMware player running Ubuntu10.04. I have setup a NFS server machine and a client machine. On my NFS server,
eth0 inet address:192.168.126.129
eth1 inet address: 192.168.255.129
On my client,
eth0 inet address:192.168.126.130
eth1 inet addess:192.168.255.128
Am I right to say, from the server machine, if I ping 192.168.126.130, I am calling the client machine? NFS server ip address is 192.168.126.129? and what about 192.168.255.129? and 192.168.255.128?
I am trying to setup a web-based secure ftp client that can handle not only file transfers to and from one of my company's servers, but also allow new clients of ours to visit our site, create an account of their own and use it to log in and begin transferring files. This way, the users can manage their own accounts.
I don't know a lot about exactly what is running on our server, though I am almost positive it is debian based. I really only have access via ssh and ftp. I may be able to do more in the server room, but haven't tried. I thought about using net2ftp, but that doesn't seem to work with sftp, and also doesn't allow the creation of new users on the server.
Is there anything out there for me??You will undoubtedly require more information from me, so please let me know what it is and where I can find it and I'll get back to you as quickly as I can.
How can i setup SSH server on one machine and openssh client on another machine running suse 10.3
View 2 Replies View RelatedI tried collecting steps for LDAP Client setup.
View 3 Replies View RelatedI want to explore DNS and Sendmail. So I downloaded exe of Vmware 2.0 on Windows Xp. I installed Fedora Linux on Both.
Now I have bridged networking and do did provided:
Instance 1:
Machine IP: 192.168.1.100
Instance 2:
Machine IP: 192.168.1.101
BIND Software is installed on both the machine.
I want to make 192.168.1.100 as Server and 192.168.1.101 as Client.
Also do let me know how can I setup DNS server?
Will it be possible to learn DNS server and client configuration through VmWare?
I'm trying to ssh to a client machine which as freeipa client setup Login works great but ssh via GSS.Is there a way to see what's being sent where? I already have the highest debug turned on the ssh side.
View 1 Replies View RelatedI'm looking for some information on setting up a VPN client through Networkmanager in Gnome. My company uses a Sonicwall VPN server, and I'm having trouble getting my F11 laptop to connect. I've tried OpenS/WAN with no luck, and stumbled across Networkmanager's VPN setup. I can choose Cisco Compatible VPN (vpnc) which says it's compatible with Sonicwall IPSec-based VPNs. Is there a how-to I can check out, or has someone else got this setup to work?
View 2 Replies View Relatedis there anyone knows how to setup and configure thin client in edubuntu 10.04?. From the beginning installation until thin client work.we have 2 set of computers. 1 computer installed edubuntu 10.04 and installed LTSP (Linux Terminal Server Project) in the OS without NIC Card. And the other computers has only NIC card.. We setup it in the bios as a "First Boot" Network Card. We connect 2 computers using "pair-to-pair connection". There and after, we restart the 2 computers. "Nothings Happened".
View 3 Replies View RelatedI'm trying to setup IPv6 in a PPTP client configuration on Maverick, but in network manager only IPv4 is available.
On LAN and WLAN IPv6 is working fine but I want to avoid when using a VPN all IPv6 connection are bypassing the VPN which compromises the VPN to a certain extent ..
I've had someone approach me recently about setting up an Ubuntu server for his small business. Having never done this for a paying client before, I have absolutely no idea where to begin as far as pricing goes. Here are some of the things I've been asked to put together:
Install and configure Ubuntu Server 11.04 with:
- Apache (LAMP)
- Samba
- SSH
- Subversion
- Webmin
As well as configuring mdadm RAID and setting the system up for multi-user access. For an experienced Linux user like myself, I don't believe that it will take me very long to get things up and running, but again, I have no idea where to even begin as far as pricing goes. Keep in mind that this client is a small business owner of a game development company with only 5 employees. I am told that he only has a "modest" budget to work with. Additionally, it is possible that I will be hired in to this company shortly, to help with game development and to maintain this system which I am setting up. I would like to use this opportunity to make money, of course, but I also want to be reasonable with the client so that I may be hired in to his company in the coming months for a programming job.