Red Hat :: Cisco VPN Client Always Down
Jun 24, 2010I'm Linux beginner. I have cisco vpnclient always down I need to run it automatically when it is down.
View 1 Replies
ADVERTISEMENT
Slackware :: Setup For VPN Cisco Client On 12.2
May 6, 2011I've just installed a vpnagent on my Slackware 12.2. A script running the vpnagent daemon is /etc/rc.d/init.d/vpnagent_init. My network is started with rc.inet1. The queston is at which point during the startup to run "vpnagent_init" script. I thought to add a call to rc.locale.
View 1 Replies View RelatedOpenSUSE :: Cisco VPN Client Freezes System
Jan 22, 2010Cisco vpn client would freeze the system. The only way to recover is to do a hard reset. The funny thing is I had it working before, so it may be random. However, it just happened 3 times in a row and I haven't tried again. I'll try again tonight. I'm pretty sure I'm running the latest client for 64bit linux systems. I'll confirm that when I get a chance, as well as my kernel.
View 7 Replies View RelatedUbuntu :: Cannot Uninstall Cisco AnyConnect VPN Client
Mar 4, 2010In order to gain access to my university network remotely I was asked to open a website that would act as a gateway. Upon opening the site I was asked to run a Java application, which installed a Cisco AnyConnect VPN client on the system. However, now I do not need this, but I cannot find a way to uninstall it. It does not appear in the Synaptic Manager or the the ubuntu Software centre, so I cannot find the package to uninstall it. The software does appear in the 'Internet' section in the Application drop down menu and runs without the need of Firefox. I read the Cisco release notes but I could not find a way to uninstall the software.
View 3 Replies View RelatedUbuntu :: 10.10 - Any Updated Guide For Cisco VPN Client
Oct 12, 2010Any updated guides anyone know of that works with Ubuntu 10.10 to get Cisco VPN Client (not Anyconnect) working with the latest version of Ubuntu?
View 4 Replies View RelatedUbuntu :: Cisco AnyConnect VPN Client Broken
Dec 2, 2010Well I right clicked on the icon on my desktop and by accident when I wanted to copy the command the starts the program i pasted something else on top of it! What I am trying to find out now is what the command is to make it work again. I got so far /opt/cisco/vpn/ but im missing the last part.
View 1 Replies View RelatedUbuntu Networking :: Installing Cisco VPN Client On 11.04
May 7, 2011I'm trying to install the Cisco VPN client on Ubuntu 11.04, kernel version 2.6.38-8 generic-pae. I need a step by step process since I am an absolute beginner with Ubuntu and this is my first install on the operating system. I have already tried the network manager but connection always fails. I have also tried the website [URL] but this always fails, seems this was made for earlier versions of Ubuntu and earlier kernel versions.
View 9 Replies View RelatedUbuntu :: SoftPhone - Connect Over Client VPN To Cisco
Aug 4, 2011I am looking for a softphone that I can connect over a client VPN to my cisco uc520. It works great in windows. Does anyone know of one that works? Cisco doesn't seem to have one that runs in linux.
View 3 Replies View RelatedFedora Networking :: Cisco VPN Client - Bug In Kernel FC11
Jun 18, 2009Probably there is bug in kernel used FC11 [url] This bug freeze computer after ping or other data sending over VPN connection.
Is there any chance to backport this patch to kernel in FC11?
More about this in topic:[url]
Ubuntu :: Download Link For Cisco AnyConnect VPN Client?
May 15, 2010I need Cisco AnyConnect VPN client for Ubuntu. Where can I download it? Please give me the link.
View 5 Replies View RelatedUbuntu Networking :: Connect To Company's VPN Using The Cisco VPN Client?
Dec 3, 2010When I try to connect to my company's VPN using the Cisco VPN client, I get a kernel panic. Please don't suggest I should Cisco's client, it only works with Kernels older than 2.6.24 (I have 2.6.35).
So I use vpnc. The error message is:
Quote:
$ sudo vpnc
[sudo] password for phirt:
Enter password for user@group@fubar.net:
received notice of type (ISAKMP_N_NO_PROPOSAL_CHOSEN)(14), giving up
vpnc: quick mode response rejected: (ISAKMP_N_INVALID_MESSAGE_ID)(9)
this means the concentrator did not like what we had to offer.
Possible reasons are:
[Code]...
Networking :: Configure Cisco VPN Client To Be Used With SOHO Routers?
Feb 4, 2010I have got different clients with different SOHO routers on sites (Netgear , Linksys, SnapGear,etc.) All those clients use VPN IPSec . As you know that those routers has many entries :
Tunnel name
key lifetime
Preshared Secret
Phase 1 proposal
Phase 2 Proposal etc.
I am trying to familiarize myself to use different VPN clients (a piece of software ), that will be installed on clients, laptops to access their work network from home. I came across a problem with Cisco VPN client V5.0.06 I could not find all the above entries. I know Cisco devices are proprietary, does that mean cisco vpn client is not compatible with those router?
General :: Cisco VPN Client - Implicit Declaration Of Function
Jul 7, 2010I am trying to install this vpn thing for school (I need to access some of my info). I seem to get to the installation part somehow but I keep getting this message
Making module
make -C /lib/modules/2.6.31-17-generic/build SUBDIRS=/home/mblack3/Desktop/vpnclient modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-17-generic'
CC [M] /home/mblack3/Desktop/vpnclient/linuxcniapi.o
/home/mblack3/Desktop/vpnclient/linuxcniapi.c:12:26: error: linux/config.h: No such file or directory .....
Ubuntu Installation :: Cisco AnyConnect VPN Client - Uninstall The Software
Mar 4, 2010In order to gain access to my university network remotely I was asked to open a website that would act as a gateway. Upon opening the site I was asked to run a Java application, which installed a Cisco AnyConnect VPN client on the system. However, now I do not need this, but I cannot find a way to uninstall it. It does not appear in the Synaptic Manager or the the ubuntu Software centre, so I cannot find the package to uninstall it. The software does appear in the 'Internet' section in the Application drop down menu and runs without the need of Firefox. I read the Cisco release notes but I could not find a way to uninstall the software.
View 5 Replies View RelatedNetworking :: Connecting Debian Client To Voyager Client Via Crossover Cable?
Jan 6, 2011trying to create a "local network" by directly connecting an IBM Thinkpad with Debian Linux installed on it to an Alix computer running Voyager Linux. I'm following a "how to" I found to create a music server, hence the requirement. My issue is I can't get a static IP address to be configured on the Debian machine.I've trawled the net and have found the instructions about editing the /etc/network/interfaces and have tried to do this. First I tried to get DHCP working so I could connect the Debian machine to the net and this proved successful. I edited the interfaces file to look as follows:
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
Then I tried adding a static IP address to the machine. As this is a network purely between two machines I made up the IP addres and used 192.168.0.1 and used a NetMask calculator to give me a NetMask of 255.255.255.254 (I told the calculator there would be 2 machines on the network). I then edited the interfaces file as follows:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
I re-booted the machine (ifdown eth0 followed by ifup eth0 keeps saying that eth0 hasn't been configured - a problem there that I don't understand), but during boot up time it failed to assign the Static IP address to eth0 and made me go into SU mode. To fix it I simply replaced the interface file with the static IP inputs with the file that had the DHCP entries (I'd made a copy of the DHCP file), and re-started the machine. Everthing came up fine. So the first question is how do I get a static IP address to be assigned to eth0 such that whenever I shut down and restart the machine the static IP address is always loaded?
The second question is around creating the network via the cross over cable. From what I've found via Google, all I should have to do is create a static IP address on the Debian machine and a static IP address on the Voyager machine. Once they're connected by the cross over cable they should see each other. Is that correct, or do I have to do anything else?
Programming :: Detect A Closed Tcp Client Connection When Client Is Only Receiving Data ?
Mar 9, 2011I am writing a TCP server in C, and the server listens to incoming client connections and accepts them. It then creates a thread to handle the client. The clients are expected to only receive data from my server and not send any data. So if I use a select() call with a recv(), I believe that the recv() will just block forever since there will not be any data coming from the client. If I use a non-blocking recv(), then this will just return a 0 which tells me nothing because the client is not expected to send any data. I am not sure if I have misunderstood some socket concepts, but I need a solution to detect when the client has disconnected so that I can close the socket and stop sending data to the client. As I understand it, simple ACKs etc are not captured by the recv(), and only data sent by the client will cause recv() to return a non-zero value, so I am not sure how to know when the client has disconnected.
View 7 Replies View RelatedFedora :: Cisco VPN Crashes 11 Completely?
Oct 19, 2009I'm running fedora 11 and cisco version 4.8.01 (0640). When I connect to my work, and get authenticated, the system freezes completely. In searching it looks like at one point updating the kernel to a new version resolved this, at least for the 64bit implementation. I'm running 32bit and I'm on kernel kernel-PAE-2.6.30.8-64.fc11.i686 which is a newer version then what was listed in the other thread.
View 7 Replies View RelatedFedora :: Cisco PacketTracer Crash In 12?
Dec 10, 2009Does anyone experiencing problems with PacketTracer 5.2 in Fedora ? When try to save a project the program crashes with the following error on stderr:
Code:
CPtmpConnection::socketError
callManager : onError
callManager : onDisconnect
Segmentation fault (core dumped)
In /var/log/messages I saw the following error :
Code:
Dec 10 11:03:05 localhost kernel: PacketTracer5[4173]: segfault at 38 ip 00ce4525 sp bffda150 error 4 in libQtXml.so.4.5.3[cca000+43000]
Seems to be a QT4 problem ....
Ubuntu :: 10.04 - Unable To Connect To Cisco VPN
Aug 31, 2010I am trying to configure and connect Cisco VPN on Ubuntu 10.04. I've imported .pcf file. The new vpn conn appears in the VPN Connections option. Now when I select it, it doesn't connect. Nothing happens. I am not able to connect to VPN at all. I tried using kvpnc as well but it didn't work either.
View 1 Replies View RelatedGeneral :: Can Not Ping 192.168.0.1 Cisco Router Or Anything Else On 192.168.0/24
May 8, 2011I have two network interface eth0 and eth1 eth0 is on 192.168.0/24 network connected to the internet eth1 is on 10.10.10/24 network and DHCP for this network the clients connected to this interface can not connect to the internet but they can ping 192.168.0.4 which is the eth0 ip but can not ping 192.168.0.1 cisco router or anything else on 192.168.0/24 I have tried few tricks but still not working
1) iptables -t nat -A POSTROUTING -s 10.10.10.0/24 -o eth0 j SNAT --to 192.168.0.4/24 it did not work
2) iptables -t nat -A POSTROUTING -o eth1 -j SNAT --to 192.168.0.4 did not work as well
Software :: Cisco IP Communicator CUBUNTU?
Mar 12, 2010I need Cisco IP communicator for my Ubuntu. Please guide me the download location and installation procedure. Or reccommend an equivalent software
View 1 Replies View RelatedUbuntu Servers :: 11.04 LTSP Connect Client Hard Drive - Register In The Fstab On The Client?
May 26, 2011I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies View RelatedFedora :: Remote Desktop Client (RDP) Aka Terminal Services Client?
Nov 25, 2009Is there a good terminal services client available I can connect to my Windows boxes from Fedora12? I am willing to pay for a commercial license if there is a good one
View 7 Replies View RelatedUbuntu :: Connecting To Cisco Device With Gtkterm?
Mar 19, 2010Code:
dmesg | grep tty
[ 0.002489] console [tty0] enabled
[ 0.956262] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.956684] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
I configured /dev/ttyS0 in port setting in gtkterm, but I get error "Cannot open /dev/ttyS0 : No such device or address" yes I'm opening the terminal as
Code:
sudo gtkterm
Ubuntu :: Cisco - Firefox - HTTP Post ?
Aug 7, 2010I am using the following software stack:Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) (Kubuntu) cisco anyconnect vpn client 2.3.2016, Mozilla Firefox 3.6.8
The problem I have is that once I join my company vpn, I have full access to corporate services confluence, jira, servers, etc. However when I use firefox to try and resolve a jira and post a body of text the connection timesout.
If i use any other browser it works fine, if slow, if i transition workflows it works fine, and if i use windows and firefox with the same cisco client it works fine.
This appears to be a specific issue with Firefox. I have noticed that in general firefox is slower on ubuntu than on any other platform.
Ubuntu Networking :: Connection Not Working Over Cisco VPN
Jan 12, 2011I am using ubuntu 10.10 and facing problem with cisco VPN connection. VPN connection is getting successful but not able to connect to destination servers.I also tried to add default gw to the the IP which is assigned to my VPN connection but still access to VPN machines not working.
View 1 Replies View RelatedUbuntu :: Using Cisco VPN For Connecting To Office Network?
Feb 1, 2011I followed [URL] to install and use Cisco VPN to connect to my office network. After importing the .pcf file, I am able to connect without any issues. However, once the connection is established, I am not able to either browse the internet or open any intranet sites. If I do ifconfig, I do not get a office IP however the tunnel IP shows up correctly. I am not sure what the issue is.
View 1 Replies View RelatedUbuntu Networking :: Use VPNC To Connect To A Cisco VPN?
Feb 28, 2011I use VPNC to connect to a Cisco VPN. I am able to connect, but some issues exist when I use SSH. For example, I login through SSH to a computer in the VPN and I execute ls => it works. If I execute ls -la => connection stalls. I think it stalls every time it is supposed to return more content (top, ls /etc).
If I do scp from my end to server => works. If I do scp from server to my end => connection stalls.
General :: Cisco Packet Tracer Fedora 12
Mar 2, 2010You have accepted the terms to the EULA. Cisco Packet Tracer will now be installed.
Attempting to install package now Preparing...
I need to do a project for my cisco class and i need to get this Packet Tracer to start working!
Networking :: Connecting To Cisco Devices Via Serial
Mar 31, 2010I did a forum search and too much came up that was not the answer I was looking for. I have only Linux devices at work and I was wondering how do Linux Administrators connect to Cisco devices via serial console cable. Cisco recommends 'Hyper Terminal' which was a Windows add-on applications licensed to XP. I think Vista and 7 no longer have the license to use Hyper Terminal. Regardless I don't have any versions of Windows and would like to use a serial cable from Com port 1 to the console port on the device. I can't use SSH since some devices don't support SSH and or I have to do a password recovery.
View 4 Replies View Related