Networking :: Configure Cisco VPN Client To Be Used With SOHO Routers?
Feb 4, 2010
I have got different clients with different SOHO routers on sites (Netgear , Linksys, SnapGear,etc.) All those clients use VPN IPSec . As you know that those routers has many entries :
Tunnel name
key lifetime
Preshared Secret
Phase 1 proposal
Phase 2 Proposal etc.
I am trying to familiarize myself to use different VPN clients (a piece of software ), that will be installed on clients, laptops to access their work network from home. I came across a problem with Cisco VPN client V5.0.06 I could not find all the above entries. I know Cisco devices are proprietary, does that mean cisco vpn client is not compatible with those router?
View 1 Replies
ADVERTISEMENT
May 7, 2011
I'm trying to install the Cisco VPN client on Ubuntu 11.04, kernel version 2.6.38-8 generic-pae. I need a step by step process since I am an absolute beginner with Ubuntu and this is my first install on the operating system. I have already tried the network manager but connection always fails. I have also tried the website [URL] but this always fails, seems this was made for earlier versions of Ubuntu and earlier kernel versions.
View 9 Replies
View Related
Jun 18, 2009
Probably there is bug in kernel used FC11 [url] This bug freeze computer after ping or other data sending over VPN connection.
Is there any chance to backport this patch to kernel in FC11?
More about this in topic:[url]
View 14 Replies
View Related
Dec 3, 2010
When I try to connect to my company's VPN using the Cisco VPN client, I get a kernel panic. Please don't suggest I should Cisco's client, it only works with Kernels older than 2.6.24 (I have 2.6.35).
So I use vpnc. The error message is:
Quote:
$ sudo vpnc
[sudo] password for phirt:
Enter password for user@group@fubar.net:
received notice of type (ISAKMP_N_NO_PROPOSAL_CHOSEN)(14), giving up
vpnc: quick mode response rejected: (ISAKMP_N_INVALID_MESSAGE_ID)(9)
this means the concentrator did not like what we had to offer.
Possible reasons are:
[Code]...
View 3 Replies
View Related
Jun 24, 2010
I'm Linux beginner. I have cisco vpnclient always down I need to run it automatically when it is down.
View 1 Replies
View Related
May 6, 2011
I've just installed a vpnagent on my Slackware 12.2. A script running the vpnagent daemon is /etc/rc.d/init.d/vpnagent_init. My network is started with rc.inet1. The queston is at which point during the startup to run "vpnagent_init" script. I thought to add a call to rc.locale.
View 1 Replies
View Related
Jan 22, 2010
Cisco vpn client would freeze the system. The only way to recover is to do a hard reset. The funny thing is I had it working before, so it may be random. However, it just happened 3 times in a row and I haven't tried again. I'll try again tonight. I'm pretty sure I'm running the latest client for 64bit linux systems. I'll confirm that when I get a chance, as well as my kernel.
View 7 Replies
View Related
Mar 4, 2010
In order to gain access to my university network remotely I was asked to open a website that would act as a gateway. Upon opening the site I was asked to run a Java application, which installed a Cisco AnyConnect VPN client on the system. However, now I do not need this, but I cannot find a way to uninstall it. It does not appear in the Synaptic Manager or the the ubuntu Software centre, so I cannot find the package to uninstall it. The software does appear in the 'Internet' section in the Application drop down menu and runs without the need of Firefox. I read the Cisco release notes but I could not find a way to uninstall the software.
View 3 Replies
View Related
Oct 12, 2010
Any updated guides anyone know of that works with Ubuntu 10.10 to get Cisco VPN Client (not Anyconnect) working with the latest version of Ubuntu?
View 4 Replies
View Related
Dec 2, 2010
Well I right clicked on the icon on my desktop and by accident when I wanted to copy the command the starts the program i pasted something else on top of it! What I am trying to find out now is what the command is to make it work again. I got so far /opt/cisco/vpn/ but im missing the last part.
View 1 Replies
View Related
Aug 4, 2011
I am looking for a softphone that I can connect over a client VPN to my cisco uc520. It works great in windows. Does anyone know of one that works? Cisco doesn't seem to have one that runs in linux.
View 3 Replies
View Related
May 15, 2010
I need Cisco AnyConnect VPN client for Ubuntu. Where can I download it? Please give me the link.
View 5 Replies
View Related
Jul 7, 2010
I am trying to install this vpn thing for school (I need to access some of my info). I seem to get to the installation part somehow but I keep getting this message
Making module
make -C /lib/modules/2.6.31-17-generic/build SUBDIRS=/home/mblack3/Desktop/vpnclient modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-17-generic'
CC [M] /home/mblack3/Desktop/vpnclient/linuxcniapi.o
/home/mblack3/Desktop/vpnclient/linuxcniapi.c:12:26: error: linux/config.h: No such file or directory .....
View 1 Replies
View Related
Mar 4, 2010
In order to gain access to my university network remotely I was asked to open a website that would act as a gateway. Upon opening the site I was asked to run a Java application, which installed a Cisco AnyConnect VPN client on the system. However, now I do not need this, but I cannot find a way to uninstall it. It does not appear in the Synaptic Manager or the the ubuntu Software centre, so I cannot find the package to uninstall it. The software does appear in the 'Internet' section in the Application drop down menu and runs without the need of Firefox. I read the Cisco release notes but I could not find a way to uninstall the software.
View 5 Replies
View Related
Jun 30, 2010
I am using two ethernet interface, in fact one ethernet interface eth0 and other is USB netconenct ppp0. I am using fedora 12 - 32 bit. I can individually use both connections. say if I disconnect ppp0 (wvdialer), everything works fine and same in other case. Now my problem is I want torrent client to use ppp0 and all other applications like firefox and other use eth0. So that I can use both interfaces effectively.
I changed in ktorrent client's configuration, and change interface to ppp0 from all interface, but it didnt work. When my eth0 id down I can ping using ppp0, but when eth0 is also up, I can ping via eth0 but not via ppp0 (ping xxxxx -I interface). What is I am doing wrong? How can I configure torrent client to use ppp0?
View 3 Replies
View Related
Jul 5, 2009
How I am configure DNS Client and server in Redhat Linux 4 in my lab.I have total 5 computers and they are Lan connected.I want to make one of them server and the others are client.
View 1 Replies
View Related
Aug 24, 2010
I bought a network printer, gave it a host name, address should be assigned by my cable or DSL router. Thats what DHCP and DNS is made for right?Now I will print to that printer from my (Lucid) Kubuntu box and resolve it by it's hostname.I can't ping it by printername, I can't ping it by printername.local.It works when I login my router, read out the IP address and hostname the printer registered at the routers DHCP-table and use that address.What can be done that a router transfers the hostnames it has in it's IP-table to clients upon DHCP resolve AND whenever a client get's a new IP-Address?
View 9 Replies
View Related
Sep 4, 2010
i do love to learn this stuff so i thing I'll give it a shot as far as setting mail, ftp, and other services i think i can manage. what i really has no clue of with where to begin is how to make this: there are foot computers, 2 of them need to access the net and 2 should not. of course, all of the PC's should be able to talk to the main server (the ftp, mail , file sharing server)so, where is my starting point?
View 2 Replies
View Related
Oct 14, 2010
in my office we are using cyberoam firewall to manage entire network , in that lot of option is there even we can configure pptp,ipecac vpn also using cyberoam.totally cyberoam acts as a server, how can i configure ppptp vpn in centos 5 as client of the cyberoam, then only i can access the office network from my home.
View 3 Replies
View Related
Mar 29, 2010
I have set up one Fedora 10 server.I found that rsyslog service is running on Fedora 10 server.How to configure rsyslog on Fedora 10 to collect the log from Cisco ASA5510 ?
View 2 Replies
View Related
Dec 29, 2010
someone who has configured vpn tunnel with Cisco ASA 5510 3DES-168 in centos 5.3 if some one has configured
View 6 Replies
View Related
Nov 1, 2010
i hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies
View Related
Aug 23, 2010
I'm new to CentOS and has recently use it.
I'm looking for a way to configure DHCP client so it would dynamically set the hostname and register itself to a DNS server. I don't have access to the DNS server.
View 6 Replies
View Related
May 27, 2011
Where are there good instructions to configure the DynDNS update client? It is not updating my IP number.
View 5 Replies
View Related
Nov 8, 2010
I am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.
View 2 Replies
View Related
Mar 31, 2011
i must make this work with the use of virtual pc's. I have vm player and installed fedora ( the latest version ) and one xp . So i have 2 virtual pc's. I'm making it simple for start so i can add more pc's when i see that it is working. I have setup a dhcp server at the fedora virtual pc. The fedora virtual pc is like a soho router. The xp pc is getting ip from dhcp while the fedora one has a static one.
My pc is behind an adsl router. Both virtual pc's can see each other which means i have no connectivity issues.Im trying to setup a squid proxy ( transparent one ) so for example the xp pc can access porn sites and such. I used all required configuration for the squid to work and started the service. Ive also inserted with iptables the commands to forward all incoming port 80 packets to port 3128 ( the squid ). It doesnt seems to be working and i thik i know why but i dont know how to fix it.
Because the xp has a gateway at 192.168.1.1 ( the adsl router ) packets go directly to it and not to the soho router ( fedora virtual pc as i intend to do) What can i do to solve this problem ? How can i forward all packets to go to the fedora virtual pc first and then the fedora pc to forward them (if necessary) to the adsl router? PS. I used Bridged connection on the networking configutration on the vmware player ! If you also want i can post the code for squid or iptables if needed !
View 1 Replies
View Related
Sep 1, 2010
I have 2 routers both with 5 network cards (both different subnets). On both machines I have the following configuration: Eth0 is the internet conection, Eth1 is the conection to the other router and the other network cards are for the subnets.My current Ip tables script allows all the subnets of one router to see each other but not the subnets of the other router.
In the new situation I want not all but specific subnets to see each other (no problem here)The issue is that some of theese subnets are subnets of the other router. For example the subnet of eth2 router1 should be able to connect to eth 3 on router2. This is were eth1 comes in play. My plan was to configure iptables so that in above example eht2 would be forwarded to eth1, which will forward to eth1 on router2.Then the iptables configuration on router2 will forward it to the network card of the correct subnet.
eth2 (router1) -> eth1 (router1)
eth1 (router1) -> eth1 (router2)
eth1 (router2 -> eth3 (router2)
[code]....
View 5 Replies
View Related
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
May 20, 2011
My boss gave me the task (on a very tiny budget) of wanting to connect our remote offices to our network. Solution I came up with is Site-to-Site VPN.
I want to use OpenVPN on the Linksys Routers (again very tiny budget) and have them connect to our Cisco ASA5505 Firewall, but I am running into major problems.
Question is, even though they both use IPSec SSL are they compatible? If not, is there a work sround?
View 1 Replies
View Related
Jun 14, 2010
So I have 3 home routers, 1 belkin and 2 netgear. I have my ISP internet connection coming into my belkin, which I then have the 2 netgear routers (from their WAN) plugged into Belkins LAN ports. Now the Ubuntu computers I have on Netgear LAN 1 and Netgear LAN2 can get to Belkin just fine (at 192.168.1.1), but I am unable to access a computer on LAN1 from a computer on LAN2 and vice-versa. My Belkin is 192.168.1.1, my Netgear1 WAN is 192.168.1.100 and Netgear2 WAN is 192.168.1.200. I have the netgears both assigning DHCP IP's from range of 192.168.0.100 to 192.168.0.150 on their LAN ports.
Now, I have set Netgear LAN1 port 80 NAT'd to go to one of my computers on it. I try to access 192.168.1.100:80 from a computer on Netgear LAN2 network and it say host unreachable.What am I doing wrong?
View 1 Replies
View Related
