I'm trying to setup IPv6 in a PPTP client configuration on Maverick, but in network manager only IPv4 is available.
On LAN and WLAN IPv6 is working fine but I want to avoid when using a VPN all IPv6 connection are bypassing the VPN which compromises the VPN to a certain extent ..
I have got pptpd linux server and pptp linux client which connects successfully. Now I want setup idle time (inactive) in pptp linux client so that if the pptp tunnel is inactive say for example 5 minutes it will be automatically disconnected. how can do that, is there any built in feature on pptp client?
View 1 Replies View RelatedI'm trying to connect to a Microsoft ISA PPTP server from my Linux box. The box I'm connecting from is itself a router. I have no problem connecting a Windows XP machine to the VPN via this machine. This is fine, but I would rather connect via the Linux machine, giving me far more advanced routing options (i.e. no to send every packet from the XP box completely unnecessarily via the PPTP tunnel). The Linux router is running Debian Lenny.
I've checked iptables. There were initially some issues. I've fixed those.
Invoking pppd from the console, I can see that authentication succeeds, but then some negotiation goes wrong and the server terminates the connection. Here's the output from pppd, with the more sensitive stuff removed:
Code:
<hostname>:~# pppd call <peer> nodetach debug
using channel 19
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe3e45f75> <pcomp> <accomp>]
code....
I used to play with gw6c ( a client for tunnel broker ) It works well with fedora9 , fedora 10, but not with leonidas. my rpm is gw6c-6.0-0.4.beta4.fc9.i386.rpm ( a little old!) when I tried to install i have got this: libcrypto.so.7 est ncessaire pou w6c-6.0-0.4.beta4.fc9.i386 I try to make a soft link to libcrypto.so.0.9.8k, but nothing; The question :-Is there a solution for that pb - did you know a better client for non native ipv6 connectivity?
View 2 Replies View RelatedI am trying to connect my pptp client Linux to a pptp Linux server using modem but no success. I can only tweak ppp linux side Observing the following log I found it�s due to MPPE Support configuration mismatch in pppd, pppd (linux client) is refusing to accept MPPE encryption.
pppd[24545]: pppd 2.4.5 started by root, uid 0
chat[24547]: abort on (NO CARRIER)
chat[24547]: abort on (NO DIALTONE)
chat[24547]: abort on (ERROR)
chat[24547]: abort on (NO ANSWER)
chat[24547]: abort on (BUSY)
[Code]....
im centos 5.3 At first, I used pptp-1.7.2-3.rhel5.i386.rpm from [URL]. But it didn't appear any process of install without a warning about the key problem, and I can't use rpm -e to uninstall it, I just uninstall it from xwindow. Then, I download the pptp-1.7.2-3.tar.gz from [URL] After make and make install, it appeared a problem when i do # pptpsetup --create tunnelname --server xxx.xxx.xxx.xxx --username somebody --password sercet。It told me "./pptpsetup: couldn't find MPPE support in kernel."
But im centos 5.3,and uanme -a: Linux localhost.localdomain 2.6.18-128.el5 #1 SMP Wed Jan 21 10:44:23 EST 2009 i686 i686 i386 GNU/Linux The kernal is support MPPE, and I have reinstalled the ppp-2.4.4.2-el5.rf.i386.
i have installed Linux i.e ubuntu 10.04 on my PC in which i have installed pptp client and able to connect it successfully but problem is that it unable to browse internet. in windows it works fine.
View 1 Replies View RelatedTrying to connect to my office as a PPTP client, I have setup my PPTP connection in Ubuntu 10.04, and the connection is active, as I can see from the top bar, and the output of ifconfig:
Code:
eth0 Link encap:Ethernet HWaddr 00:18:8b:b7:a3:ef
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:580 (580.0 B) TX bytes:580 (580.0 B)
ppp0 Link encap:Point-to-Point Protocol
inet addr:192.168.0.166 P-t-P:192.168.0.254 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
RX packets:9 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:108 (108.0 B) TX bytes:96 (96.0 B)
wlan0 Link encap: Ethernet HWaddr 00:19:d2:7a:96:e5
inet addr:192.168.1.107 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::219:d2ff:fe7a:96e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8525 errors:0 dropped:0 overruns:0 frame:0
TX packets:8496 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5799296 (5.7 MB) TX bytes:1408867 (1.4 MB)
Now I want to access the folder named ABC on the remote PC with IP address of 192.168.0.12, with username USER1 and password PASS1.
1st, i managed to make a VPN connection to my server and after a reboot i get this:I've tried everything that google gives me with "ubuntu vpn service failed to start pptp" search terms.2nd, I've got a DSL connection (PPPoE) to the internet. When i connect it, eth0 looses it's ipv4 ip (I've disabled ipv6). How can I keep it?
View 1 Replies View RelatedI've searched the forums (250 thread limit) for a fix on this, but all the questions seem unanswered or unrelated. My situation is this: I'm running Ubuntu x64 10.10 'Maverick'. I have a cablemodem connection for my Internet access. I have home network running on DD-WRT with the dreadful Linksys WRT54G series router.
My DD-WRT router is 192.168.1.1, subnet 255.255.255.0.
My Linux box is 192.168.1.61, subnet 255.255.255.0.
I have a VyprVPN connection set up successfully on Linux. Mostly everything works great, speed's fine, latency is what I expect it to be. Except... I also run an SSH server to remotely admin the box at port 22, an Apache server running over SSL at port 7001, and a Transmission web client at port 7002 (only secured by basic HTTP realms auth). All of these things worked before I got the VPN working, I'm of course using NAT at the DD-WRT router.
The endresult I am looking for, is to have the security and protection of the VPN (even if it's only perceived) for everything I do on this machine -- EXCEPT on Apache, the Transmission web panel, and the SSH server, which I want to access from the outside world. I have no firewalls running or configured, not even iptables, not even the SPI firewall on DD-WRT. All connections to the aforementioned services from the outside world timeout coming in to the Linux box. They all work from inside my home network (182.168.1.0/24). In case it's needed, he's my routing:
[Code]....
I've been using IPv6 on my local network and through a Hurricane Electric IPv6 tunnel. I've heard that one of the built in features of IPv6 is encryption, both scrambling the data and authenticating where the traffic came from. I've done some searching and heard of SWAN and Racoon, but some of the stuff I found is old and I would like to know what the easiest/best way to set up IPSEC for IPv6 is.
View 3 Replies View RelatedI have a he.net ipv6 tunnel account and a manage to pass all the test to sage mode, but with debian 6.
I would like to have a step-by-step setup of centos 5.5 with iRedMail 0.7, but for only ipv6.
IP6TABLES
iRedMail with LDAP
DHCP for ipv6 (optional, just wanted to see the config)
Can't seem to add jpg files.
I am trying to connect to a PPTP VPN at work, and I cannot accomplish that. Both server and client are using Ubuntu 10.10.
Code:
Jan 7 11:32:26 multicore-dev03 NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
[code]....
i have a VPN server PPTPD on Centos 5.3
eth0: 62.2.2.x (public on the internet)
GW: 62.2.2.1 (cisco router)
i want to configure my ppptp server to allow users access internet with their own public ips of class 62.2.3.0 62.2.4.0 62.2.5.0
every time i configure my server all users can get thier IPs but they only go out with my server IP same as NAT not routing.
can you show me the proper configuration to make my users connect with public IP and have internet access. use specific DNS ( i did this but some users can not brows by DNS)
is there any way to specify an expired date for each pptp user.
I have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.
The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.
If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.
I have a Slicehost VPS and I'm trying to set up PPTPD on it. I only have one IP address (the public IP of the box). All the PPTPD howto's I've seen rely on assigning remote clients IPs from the local subnet (e.g. the PPTD server's local IP is 192.168.0.20, and remote IPs are taken from a pool of 192.168.0.30-40).
However I don't think I can do that as I only have the one IP address on Slicehost's network - that public IP (and all other IPs in the segment are public). So what I really want to do is to be able to create a private LAN segment or virtual network adapter and have VPN clients assigned addresses in that segment, then routed out onto the Internet effectively using the PPTPD box as a router. I am using Ubuntu Hardy (LTS).
I installed Fedora Linux and I am using GNOME. I've created a vpn connection and is connected to the server without problem (Please see attached photos); But after being connected, Upon opening the site ,Vpn will automatically disconnect.
View 1 Replies View RelatedI want to be able to use my Dial-up networking VPN connection on either my windows desktop or Fedora 12 laptop to dial into my network. My server is Fedora 10. This question is how do I setup the server. I already have the clients configured..I've tried this but it looks like its for LPT2 or IPSEC tunnels. I am looking for PPTP (Dial-up
View 3 Replies View RelatedI need to setup a PPTP vpn server i am planing to get a VPS server from ixwebhosting they will install either on for the following os
1...centOS
2...debian
3...openSUSE
which would be best for a PPTP server, i belive i would have to install POPTOP server on them my self! or is there a better way to do it?
I'm looking for some information on setting up a VPN client through Networkmanager in Gnome. My company uses a Sonicwall VPN server, and I'm having trouble getting my F11 laptop to connect. I've tried OpenS/WAN with no luck, and stumbled across Networkmanager's VPN setup. I can choose Cisco Compatible VPN (vpnc) which says it's compatible with Sonicwall IPSec-based VPNs. Is there a how-to I can check out, or has someone else got this setup to work?
View 2 Replies View RelatedI have one Windows-XP on Machin 1 and one Linux on Machine 2. I want make Linux machine as CVS server and Windows Xp as CVS client. How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
View 1 Replies View Relatedhow to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.
View 2 Replies View RelatedIs it possible to setup samba to work over IPv6?
View 2 Replies View RelatedI'm trying to connect to [URL] but it will not work no matter what settings. I have ticked MPPE, configured gateway, username, MSCHAP and MSCHAPv2 are ticked, using 128-bit encryption. I have tried to forward port 1723 and 1127 in my router, I have also ticked "enable PPTP PassThrough" in the router. I cannot telnet to vpn.itshidden.com. This is on Ubuntu Lucid. These are my logs from an unsuccessful connection attempt:
[Code]....
I am having trouble connecting back to my vpn at work while I'm at home. Mainly need to get our local svn repos for at home development. I successfully connected to the vpn following this [URL]..I am running Lucid Lynx 64bit and I followed the 9.10 section of the tutorial on setting up PPTP connection.
It worked fine. Then I walked away from my computer and it was disconnected when I came back 2 hours later. I was unable to connect back to it. I used my laptop which is running windows 7 and it connected just fine. So, now I am unable to connect to it and have no idea why. I viewed my system log and don't know what to do with the information. Could someone help me out on this.
Jan 18 18:51:43 david-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Jan 18 18:51:43 david-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 5532
Jan 18 18:51:43 david-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
[Code]...
10.04 Ubuntu, Have tried every single combination of fields in the Advanced options area when setting up the VPN.
Code:
Apr 25 02:48:10 John NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Apr 25 02:48:10 John NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 12263
Apr 25 02:48:10 John NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
Apr 25 02:48:10 John NetworkManager: <info> VPN plugin state changed: 1
Apr 25 02:48:10 John NetworkManager: <info> VPN plugin state changed: 3
[Code].......
I just installed ubuntu 9.10 but there isn`t pptp VPN on Network manager. How can I install its packages?? I dont have any internet access on my linux because the only way to connecting to the internet is pptp VPN for me.
View 1 Replies View RelatedI setup a PPTP VPN connection in ubuntu 9.10 (x86_64) using NetworkManager. After enabling the VPN connection, I can browse web pages (it's perfect) but after a while the vpn connection is terminated! The following is my syslog after connecting and terminating:
Code:
Mar 12 22:10:10 amir-desktop NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Mar 12 22:10:10 amir-desktop NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 2204
[Code]....
Having problems connecting to a work's VPN server.syslog output pasted here:
Code:
Sep 7 22:45:31 localhost NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.pptp'...
Sep 7 22:45:31 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 1771
Sep 7 22:45:31 localhost NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections
[Code]...
I got this working om my laptop but on my desktop this keeps going wrong, its an upgraded system to 10.04. Made a standard pptp connection using network-manager (and the connection is 100% fine, working on laptop and on windoooz machine) This is syslog any ideas, i reinstalled network-manager-pptp and pptp-gnome, but no go no go..
[Code].....