Ubuntu Servers :: How To Setup Thin Client In Edubuntu 10.04
Oct 8, 2010
is there anyone knows how to setup and configure thin client in edubuntu 10.04?. From the beginning installation until thin client work.we have 2 set of computers. 1 computer installed edubuntu 10.04 and installed LTSP (Linux Terminal Server Project) in the OS without NIC Card. And the other computers has only NIC card.. We setup it in the bios as a "First Boot" Network Card. We connect 2 computers using "pair-to-pair connection". There and after, we restart the 2 computers. "Nothings Happened".
View 3 Replies
ADVERTISEMENT
Jun 6, 2011
I have been working/implementing LTSP based thin clients now using Ubuntu 10.04 LTS 32bit server. I intend to change the default purple Ubuntu splash. I have already removed the "quiet splash" parameters in the pxeconfig file. And it works, giving me a text boot. But what i needed was a replacement for the splash.
View 1 Replies
View Related
Jul 22, 2011
I am trying to install and configure LTSP on a server for a HP thin client to boot off. The version of Ubuntu that I am using is 11.04 x86 and it is a fresh install on a dual core system with 2GB RAM. I followed a guide which comprised of these commands.
sudo apt-get install ltsp-server-standalone openssh-server sudo ltsp-build-client or if your on a 64-bit system with 32-bit machines do sudo ltsp-build-client arch i386 for editing the servers IP values use /etc/ltsp/dhcpd.conf after that you need to restart DHCP server sudo /etc/init.d/dhcp3-server restart
and update sshkeys -sudo ltsp-update-sshkeys and if you updated dhcpd.conf then you need to update you image also by typing in terminal ltsp-update-image
Everything seemed to install as it should but when I try to boot from the thin client it just times out and says no DHCP or proxy invites received. I turned DHCP off on the router and even tried another router, but I still get nothing. I am at a bit of a loose end and I hope someone on here can point me in the right direction of where I am going wrong.
View 1 Replies
View Related
Feb 7, 2011
I have recently set up a network of 21 computers running Edubuntu 10.10 I use iTalc to communicate with the pcs and also to shutdown all of them at once. The only problem I have, is it doesn't start up again with iTalc. So I switched to ClusterSSH. Only problem I have now is that everytime I run cssh, I need to manually add IP addresses of all the pc's, before I can start issuing commands. Is there a config file or something I can populate with all the IP addresses so that it starts up with all of them already added? And while we are at it, the command to start up a computer on the network?
View 2 Replies
View Related
Feb 25, 2010
I just finished setting up a new computer lab at my kids school, using LTSP and 22 think clients connecting to Ubuntu.Everything is going beautifully, and I'm using static IPs and autologin so that when each computer is turned on it logs itself in with no userintervention. The problem is, when users go to the top right system menu and select "Shut Down", they are brought out to the login screen for a second and then immediately logged back in automatically to the Desktop. How should I be shutting down the thin clients?he only way to do it at the moment is to have everyone hold the power button down until the CPU shuts off, but it feels sloppy and unhealthy.
View 3 Replies
View Related
Jul 10, 2010
I have an old HP T5700 thin client. I have replaced the FLASH memory with an 2.5" hard drive and have installed a minimal version of Ubuntu Lucid on it. I would like to get the audio to work - specifically the microphone. sudo aplay -l gives:
[Code]...
View 5 Replies
View Related
Mar 22, 2011
I'm attempting to take Ubuntu 10 down to an image as small as possible to support Citrix Receiver. We currently log them into a browser interface using Firefox where they authenticate against a Citrix DDC and then launch the plug-in. I'm wondering if there is a simple way to determine what services I can shutoff to limit the footprint of the OS. Some of the machines have only 256MB of RAM. They run the plug-in just fine, but there's a lot background activity affecting the machines...
View 4 Replies
View Related
Jan 6, 2010
After switching over to linux on my desktop PC (ubuntu) I would like te learn more about linux.I'm trying to get an ELO touchscreen working on an IBM thin client. At the moment I managed to boot it from a CF card.(normally it boots kernel.2200 from a host PC but to avoid interference with the operating system, a flight simulator, I want to try it first with the system booted from a flash card)
I tried to install the 32 bit Linux driver from the ELO-website but did not succeed.I was following the manual.I managed to extract the files and copied them to the right directory but when I type in "make" the command is not recognised. I don't know if it would ever work, but when I tried "make" on my Ubuntu machine I get error #2?! What does that mean.
View 3 Replies
View Related
Jan 23, 2011
I'm looking for a Micro Distro based on Debian, to install it on a bootable USB stick and to use it as a Thin Client.
View 2 Replies
View Related
Mar 12, 2010
I would like have my client computer be able to boot off of a cd right into a terminal server connection. Not click here, then there, enable wireless....so on.. Just boot into a terminal server connection screen.
View 1 Replies
View Related
Sep 20, 2010
i want to share the Internet connection to thin client from my Ubuntu server,Internet is accessible to my Ubuntu server but i am unable to boot from thin client to server,i configured DHCP but of no use.can any plz send me the detailed steps to configure thin clients in my network
View 1 Replies
View Related
Nov 30, 2010
getting a CAC reader to work with a PXE booted Ubuntu LTSP thin client?
View 3 Replies
View Related
Dec 2, 2009
I have Samba PDC server on CentOS 5..we have 10 thin clients in our network which were working fine previously with the windows Terminal services... Now i have replaced my windows 2003 Domain to Samba Domain Controller.. Is there any why i can connect our thin clients with SAMBA DC in the our environment?
View 2 Replies
View Related
Feb 10, 2011
Environment: Ubuntu 9.04 Server/Thin Client. I tried to use KTouch in a classroom with 20 students working at thin client workstations. I thought KTouch was supposed to keep track of the students' typing statistics, what lessons they completed, etc. However, the students get no statistics or any record of what they have done.
Where can I find information on how KTouch is supposed to record/store this information?
View 2 Replies
View Related
Sep 22, 2010
plz can any one help me in configuring linux server 5.0 to share the internet connection to thinclient and the steps reqiure at client side and server
View 2 Replies
View Related
Jun 4, 2009
Does anyone know if hp thin client linux version supports desktop icons?
View 3 Replies
View Related
May 31, 2011
I've had someone approach me recently about setting up an Ubuntu server for his small business. Having never done this for a paying client before, I have absolutely no idea where to begin as far as pricing goes. Here are some of the things I've been asked to put together:
Install and configure Ubuntu Server 11.04 with:
- Apache (LAMP)
- Samba
- SSH
- Subversion
- Webmin
As well as configuring mdadm RAID and setting the system up for multi-user access. For an experienced Linux user like myself, I don't believe that it will take me very long to get things up and running, but again, I have no idea where to even begin as far as pricing goes. Keep in mind that this client is a small business owner of a game development company with only 5 employees. I am told that he only has a "modest" budget to work with. Additionally, it is possible that I will be hired in to this company shortly, to help with game development and to maintain this system which I am setting up. I would like to use this opportunity to make money, of course, but I also want to be reasonable with the client so that I may be hired in to his company in the coming months for a programming job.
View 9 Replies
View Related
Jul 26, 2011
We are using thin client systems in our work environment. There is a central ubuntu server and by using thin clients, we are connecting to our homes. The problem is when I try to install an application, it reported me that I had 200 mb of disk space. But when i try to look from console, I see that /home folder has over 250 gb s of disk space. Even when I try to look from baobab, Disk Usage Analyzer in Ubuntu, i see that my home file system is full.
So what's the reason that I am receiving different kinds of disk space report from different sources? Our system admin here told me that some applications foolishly try to see the physical devices on the thin client and got confused as a result. Is this true?
View 1 Replies
View Related
May 22, 2011
I am trying to build a file server with RAID 5 over a couple of 1TB HDDs, to serve about 10 client machines using Ubuntu Server. I already own a 22-port switch: HP ProCurve v1810G-24 Switch (J9450A), which I am assuming will do the job. And for the actual server I am thinking of buying: HP ProLiant DL120 1U. Will this hardware suffice, or am I missing something important to get the whole thing running?
View 9 Replies
View Related
Dec 12, 2010
I have recently installed an ltsp system, client and server. Everything works except i cannot get my client side serial ports to work or register for that matter. Can anyone point me to the steps i should take to get these working.
View 1 Replies
View Related
Oct 2, 2010
I want to setup an email client in order to send/receive emails, but since i am experiencing some issues with my ISP, i decided to setup an SMTP server with Postfix on my machine.The problem is that i can receive emails but i can not send.I read almost every thread in here refering to Postfix, but i could not find the problem on my configuration.So here it is..
Code:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
[code]....
View 6 Replies
View Related
Jun 29, 2010
I would like to know how to install a webmail server and a suitable client to help connect to it that is compatible with both windows and linux ubuntu.
View 1 Replies
View Related
Aug 1, 2009
Anyone know how to compile fedora core to be used as a thin client / dumb terminal with a small kernel?
View 4 Replies
View Related
Jan 19, 2009
My brother and I want to set up a server off of which we would provide the processing power for several thin clients. Is it possible to serve the thin clients with images of Windows XP to run?
View 3 Replies
View Related
May 26, 2011
I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies
View Related
Mar 14, 2010
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies
View Related
May 10, 2010
i found this video, and i really want to do the same. *newbie needs to learn [URL]...my question is, what need to be installed and how?
is there any specific configuration to make it works?
and will it work if i want to connect from Ubuntu to Fedora ?
View 1 Replies
View Related
May 31, 2011
How can i set-up L2TP client on my ubuntu-11.04? There is no such option in my vpn connection types.
View 2 Replies
View Related
Aug 1, 2011
I am using VMware player running Ubuntu10.04. I have setup a NFS server machine and a client machine. On my NFS server,
eth0 inet address:192.168.126.129
eth1 inet address: 192.168.255.129
On my client,
eth0 inet address:192.168.126.130
eth1 inet addess:192.168.255.128
Am I right to say, from the server machine, if I ping 192.168.126.130, I am calling the client machine? NFS server ip address is 192.168.126.129? and what about 192.168.255.129? and 192.168.255.128?
View 2 Replies
View Related
Feb 13, 2010
cant find the notices for that version or server is busy for upgrading.
View 6 Replies
View Related
