Programming :: Reading The Absolute File-path As Sorted?
Jun 13, 2010
I wanted to read out the absolute file-path (filename) as sorted in a folder (on Linux). The reading the file-paths is ok but I have problems in sorting.
Code:
selectedDirectory = fl_dir_chooser ("Select Imagedirectory:",NULL,0); //This is just a widget to show the folder.
DIR *d;
dirent *de;
[code]....
The files -105.dcm, -106.dcm, -107.dcm lie in the folder at the bottom and -36.dcm, -37.dcm- at the top. The program compares 1 and 3 of 105 and 37, 1 is lesser than 3, then prints out first, but does not know that 105 is three digits and 37 is two digits.
Java applet not loading image with relative path(e.g. images/1.jpg) but loads image with absolute path(i.e. from /root/user/images/1.jpg) . This is a problem when i want to host the applet on web server
Does anyone know how to get the path with a inode number by C programming? Or can I get the absolute path without giving a "path" but a inode number by C?
like this: get_path(unsigned inode); not such this function: getcwd(".", xxx); taowuwen@gmail.com
I have a program that takes a relative path as input appends it to a some path string to get the actual path.
Now all I can input is the relative path. So if I want to go one level above my input will be ../mypath.
If I know the depth of the path used internally, I can use .. as many times to go to the root directory and then give the absolute path. But suppose I do not know the depth of the directory, can I construct a relative path string such that it considers it as a relative path. One way could be to have enough .. in the path string so that I can force an absolute path for some maximum depth of path.
Is there some path string syntax that I am not aware of but can achieve this?
prefix=user@my-server: find . -depth -type d -name .git -printf '%h�' | while read -d "" path ; do ( cd "$path" || exit $?
[code]....
How shall i go about changing the absolute path to relative path, so that /home/git/mirror/android/adb/ndk.git gets converted to /mirror/android/adb/ndk.git //echo <command> "$prefix$PWD.git" ?? - anything for relative path?
I have a binary file, which I need to process using my C++ application. Only thing I know is first chunk of the file is long, second chunk is int, third chunk is char etc... The binary file actually contains something like below. (which is represented in hex base).
D7 07 00 00 00 00 00 00 37 18 00 00 DE 07 ............ so on.....
I need to procees the file in the following way.
* I know the first data segment in my file is long. So it takes 4 bytes. * so I need to read the first four bytes. That is D7 07 00 00. * Then I need to reverse this as 00 00 07 D7. * Finally I need to get the decimal value of above hexa decimal line. ( 00 00 07 D7) * i.e. 00 00 07 D7 (in hex) = 7D7 (in hex- after removing leading 0 s) = 2007 (in decimal)
I have two files of data with different numbers of columns and rows. I want to read this two files in two arrays and then compare for example the second column of first data file with the third column of the other text file and if the difference between of two numbers is less than a threshold then the program print the information in the rows which fulfill this condition in the third text file. I have written below program but the problem is that it does not go through all rows of second file.
declare -a a declare -a b r=` awk '{n++} END {print n}' second.txt ` echo $r awk ' {
[Code]....
Actually I have two data files one of them contains 44406 and the other one has 12066 rows and I want to check whether the difference between the components of two specific columns is less than a threshod but I have simplified it here. I had written this code and then I have realized that this code just goes through the number of rows as the same as the first.txt file and ignores the rest. I could not find the problem yet.
I made a string key-value mapping struct in C, and functions to add and remove entries. I would also like to write a function to read in this file format:
I need to Read a path of a file witch is written in Text file i used this
Code:
FILENAME=$1 while read line do echo $line done < $FILENAME
it worked and showed me the Line witch was written in my file but now my problem is how am gonna use that line as a path i mean for example if am gonna execute a linux command on that file like dpkg -i /path/to/the/file how am gonna export it from The $Line variable and use it after the command.
I am trying to read certain lines within a file and give the output of the certain lines that dont equal my value, I think showing you would be easier. There is multiples of these inside one file...
Code:
LV Name /dev/vg00/lvol1 LV Status available/syncd LV Size (Mbytes) 300lable/syncd
[code]....
I want to read everything in the file, if the status is not available then it should display the name (directly above status). If they are all availbale then do nothing. I think I know how to do it which includes putting the info in string form and placing in hash but it is proving to be out of my skill range.
To save on the writing of WAY to many files with very little in them, I want to put it all in one file and read a specific few lines. There will be six variables to be read at a time. Format is as such:
//Set 1 string name 5 12
[code]....
From name to 5th number is a set. The name will be of different lengths for each set. This will be a big file of probably 40+ sets. My problem lies in reading one and only one set be it set 5 or set 34. It needs to be done in C++.
I am trying to read a file character wise and trying to write the same character to another file. In this process, I unable to read and write white spaces successfully to the new file. The script reads the white spaces but while writing the white space is lost. The section of the code, is given below. Please advice how can i read and retain the white space while writing to a new file.
Code:
if [ -s f_test.txt ] && [ -f f_test.txt ]; then echo "File Exists !!" while read -n1 char; do
how to program in bash, an i have a problem, i am trying compare values in between 2 values (from another file), so far my solution is to make a nested for loop, but that causes it to compare every value. Here is a visulization of what i want
file.a 2,3,4,5 file.b 3 5
[code]...
i want the values 2, 3, 4, 5 from file.a to be compared inbetween values 3 5, 6 9,1 2, 4 7 from file.b (var1 is the value im comparing, var2 is the less value, var 3 is the greater value)
for i in $var1 do for k in $var2 do
[code]....
my problem with the above code is it compares EVERYINNG, not the values inbetween what i want (which is 3 5, 6 9 etc).
There is the Archive::Zip I think I can use with Perl 5.10 but I don't know how. I don't want to read or write any files, just zip something in memory, with best compression, like
$text = "this is a test"; $zippedtext = &Zip($text); sub Zip {
I need to read a binary file using my C++ application. That binary file may contain arbitary characters and it also contains 0 at some places. I need to read the file without considering null terminating character. (i.e. considering 0 as a normal byte and not as the end of the string)Can some one suggest me a method to read the buffer while ignoring the null terminated character.
I would like to read unix file permissions into a bash array for processing but tbh I have no idea how to do this. Then I will check for each individual access right l, d, x etc.
I've been dabbling in IDL lately, and it seems useful enough, but occasionally I come across a problem like this: I'm trying to call an IDL procedure from within an IDL script which is called from a .csh script. (Don't ask, trust me, you don't want to know.) The IDL procedure may or may not be in the same directory as the .csh, so I'm calling it by it's full path: /home/ic/rad_sim However, all IDL will do is give me a syntax error and tell me ic is an undefined variable. Putting ic in double quotes makes the undefined variable error go away, but it still reports a syntax error.
So the above is the error message I am receiving when trying to compile (at make stage when error received) binutils 2.20.1. I am compiling in Virtualbox and the base machine is SourceMage 64bit.
Is there a way to get the full path of a file in C? I have a method that accepts a file name as an argument and is supposed to read the content of the file. The file name might include "../" so this might lead to accessing files outside of the current directory. I tried to use fstat but I could not figure out how to get the full path.
I'm fighting my way through JAVA. But have hit another wall. Basically I need to to set paths in java so it can set/read files/director for Linux,Mac and windows.
The tutorials I'm using says to do this through the FileSystems class eg
Code:
However this reports it is missing, so a look on line says I need the headers so I set them with
Code:
This gives the following error
This has me totally confused as the tutorial shows this and checking online shows this, do I need to link in libraries or something like that?
I don't understand the results of a simple performance test I ran using two basic scripts (running on a high end server):
perfVar.zsh :
#!/bin/zsh -f MYVAR=`cat $1` for i in {1..10}
[code]...
Performance test result:
> time ./perfVar.zsh BigTextFile > /dev/null ./perfVar.zsh FE > /dev/null 6.86s user 0.32s system 100% cpu 7.177 total > time ./perfCat.zsh BigTextFile > /dev/null ./perfCat.zsh FE > /dev/null 0.01s user 0.10s system 91% cpu 0.118 total
I would have thought that accessing a VARIABLE was way faster than reading a FILE on the file system... Why this result ?Is there a way to optimize the perfCat.zsh script by reducing the number of accesses to the file system ?
I want to assign an address location to a pointer and wanted to display the value at that memory location.I wrote a small program for this and it is like this : (i am using gcc 4.4 compiler)
# include "stdio.h" int main() { unsigned int *a; a=(unsigned int *)0x3f8; printf("%u",*a); return 0; }
