Slackware :: 64 13 - Intel Sound - Rapidly Droping Off
Feb 9, 2010
I have been using Slackware64 newly installed to an external USB drive to get used to KDE4 and whatnot as I currently run Slackware 12.0. It's been very good and I now feel a little alienated when I reboot to Slackware 12 and KDE 3. There is an ongoing problem though. My machine has a front mounted jack socket for headphones which cuts off the feed to my external speakers as it should. When ever I plug in my headphones the volume coming through them rapidly drops off to nothing, If I then unplug them no sound comes back out through the external speakers. It could be that they are being reinstated when I unplug the headphones but the sound level has dropped to zero - as it has in the headphones. The machine has an on board Intel sound device reported like this :
[Code]....
This is a real pain and the only solution seems to be to reboot. This not only happens when in KDE but also if I run "speaker-test" as a test from the CLI as well.
View 2 Replies
ADVERTISEMENT
Aug 30, 2010
I was just given a computer from a coworker and installed the latest Slackware version on it. I then installed Gnome Slackbuild and installed the Nvidia driver.I've run alsaconf and it seems to run fine without any errors and unmuted all the channels in alsamixer.
View 6 Replies
View Related
Nov 17, 2010
I think it's the HDA Intel anyway. In alsaconf it comes up with, 'hda-intel Intel Corporation 82801H (ICH8 Family) HD Audio Controller', and I select that one. When I do, 'aplay /home/emor/sample.wav' it says it's playing but I don't here any audio. I've tried various configurations on both the alsamixer and the graphical XFCE sound mixer, and neither have really done anything. [URL]...
[code]...
View 2 Replies
View Related
Dec 13, 2010
I seem to have problems with sound on a ICH7 chip. the motherboard is an ASUS P5LD2-SE
The kernel is custom, but SND_HDA_* is included. and generally the sound device is identified properly.
Here is some relevant output of aplay -l and -L, lsmod and relevant part of lspci -vv
Quote:
Quote:
(what is this 'null' in the very beginning?)
Quote:
Quote:
I read this relevant thread: [url]
But my GPU doesn't have an HDMI output (and no sound module either). Note that I did see a similar msg
Quote:
To this one (of course it didn't include any nvidia references) but after running alsaconf, alsamixer, alsactl store once the msg vanished.
This thread didn't help either [url] as I'm running slackware64 13.1 on this pc and there are no newer alsa* package versions for me to install than the ones I already have.
View 2 Replies
View Related
Jan 2, 2011
i did a recent install of slackware 13.1 in my toshiba nb200 netbook and everything is running good, except the sound. i can listen to only one audio stream from one software. if videos (firefox) is playing a video, audacious won't play, and vice-versa. i did some research but i didn't find a solution for this problem.
[code]...
View 2 Replies
View Related
Jan 30, 2010
I have a toshiba netbook, and I'm running linux slackware 13.The sound card is an HDA intel.So far I've ran alsaconf and configured the above mentioned sound card. I've also gone into the alsamixer and unmuted everything and turn the volume up.I get absolutely no audio.
View 15 Replies
View Related
Apr 15, 2010
I am running 10.04 beta right now, on a hp a6740in , I have wireless usb adapter WG111v3 with me for connecting to my home network , It works perfect in windows but i am trying to get working it with Ubuntu since the past year. In 10.04 beta , It MAY connects for sometime and then drops out,trying to connect again and again, asking me to review the password each time.
I have also filed a bug about the same some 6-7 months month ago, but the ubuntu community seems busy with many other things. So i decided finally posting on the forum again , hoping to get a working solution this time(previous was when jaunty launched) This is the only thing that keeps me away from using ubuntu for my general day work, I have already searched through ubuntu forums but always end up with ndiswrapper thing which doesnt works.
View 8 Replies
View Related
May 12, 2010
In a c program the value of an integer variable is changing rapidly. I have to get the value of that variable at a particular instant from another program. How can i do it without using a file?
When i tried with extern variable as
I execute the both .c file from 2 terminals but got only value 0 printed for both var_a and var_b all the time .
View 4 Replies
View Related
Jan 12, 2011
Running Squid version 2.6.STABLE21 on CentOS5 release 5.5 (Final) in non transparent mode. All the browsers are configured to connect to the squid on the said port. And that is working fine in conjunction with dansguardian.I want to integrate ncsa_auth basic authentication mechanism into squid. And the error is what is mentioned in the thread title.
Here is cache.out file contents:
Code:
2011/01/12 18:16:14| Starting Squid Cache version 2.6.STABLE21 for i686-redhat-linux-gnu...
2011/01/12 18:16:14| Process ID 29318
2011/01/12 18:16:14| With 1024 file descriptors available
2011/01/12 18:16:14| Using epoll for the IO loop
2011/01/12 18:16:14| DNS Socket created at 0.0.0.0, port 52054, FD 6
[code]....
View 4 Replies
View Related
Jun 1, 2011
I am running fedora 14,
have 456.2 MB RAM
59.9 GB disk space
Kernel 2.6.35.13-91.fc14.i686
Intel Pentium 4 CPU 2.00Ghz
SIS motherboard
Unknown brand sound card
Have tried tried the following music apps
-Amarok
-Audacity
-Banshee
-Rhythymbox
-Kaffiene
-Movie Player
Have played
-mp3
-m4a
-wav
Used several diff speakers and heaphones
What is the problem?
View 10 Replies
View Related
May 23, 2010
I just got Ubuntu 10.04 installed and I seem to be having a problem as many others with the sound. because a laptop with no sound tends to be a wee bit boring
Code:
View 6 Replies
View Related
Jul 2, 2010
I just did a clean install of Ubuntu 10.04 and the whole installation went fine.
My only problem is that I have no sound MB is Intel DG45FC.
I know the hardware is OK because I tried it in Windows (dual booting).
View 1 Replies
View Related
Oct 3, 2010
I just got installed ubuntu 10.04 in my HP laptop. But there is no sound in my speaker??
View 1 Replies
View Related
Nov 27, 2010
I've recently installed stable (5.x, I think that's lenny...) on a laptop and there's no sound at all.
I had this problem years ago when I last installed linux on here. I solved it then and I thought the solution was unchecking "external amplifier" in alsamixer.
I believe my sound card (Intel 82801DB-ICH4) is detected and the appropriate driver loaded (snd_intel8x0) however, even running speaker-test produces no sound (no error either).
I've read that the intel hda have a model parameter found by greping for codec in /proc/asound/card? but I can't find any information about what codec is used in any path like that. Is there a model parameter for this card too? I'm on a philips freeline X10 laptop.
I ran alsaconf and nothing seemed to change. I tried alsactl init but the command init wasn't found, I suppose that must only be in newer releases. I installed libesd-alsa0 to replace libesd0 but that didn't help (should I revert this file? libesd0 says it's for oss). I also appended "options snd_intel8x0 index=0" to /etc/modprobe.d/alsa-base which got the card registered as the first device.
Here are the outputs of commands I've seen used:
[Code].....
View 14 Replies
View Related
May 31, 2010
I get no sound with kernel 2.6.30-2-686 or 2.6.32-5-686. Works fine in 2.6.26-2-686. Card is found, it accepts streams but plays nothing to either internal speakers or headphones.
View 10 Replies
View Related
Feb 14, 2010
I have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.
View 2 Replies
View Related
Jun 18, 2011
I upgraded from 13 to 15 using preupgrade, and suddenly I don't have any audio / sound. I tried pavucontrol but it shows no hardware device available; alsamixer do show the hardware, though, as "HDA Intel". I attached alsa-info output. Running lspci I go this as audio device:
Quote:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
View 2 Replies
View Related
Jun 30, 2011
Technically it is a Realtek chipset I believe. Worked fine under 11.2. In the old days would just run alsaconf but I'm sure that is passe' by now.
View 9 Replies
View Related
May 2, 2010
I am running Ubuntu 10.04 with an Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller, and no sound output. I have both pulseaudio and ALSA installed. I have already checked with
Code:
alsamixer
that my sound isnt muted and aplay -l outputs this
Code:
xxxx@xxxx-ubuntu:~$ aplay -l
[Code]...
View 4 Replies
View Related
Dec 21, 2010
I recently decided to install 10.04 on my Intel D945GCLF2 that has a dual-core 330 atom and 2gb of ram. The install went fine and video and everything works, but I cannot get any sound. Not sure if I am posting in the right section either. I am going to update my alsa driver to 1.0.23 but don't know if that will help.
View 1 Replies
View Related
Jun 16, 2011
Using Ubuntu 10.04 on an office laptop Dell Inspiron N5010. It has got Intel HD audio which does not work. Here is lspci -v
Code:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Dell Device 0447
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at fbd00000 (64-bit, non-prefetchable) [size=16K]
[code]....
The sound does not work at all. If anyone has had any issues like this before? I thought intel to work out of box and it has so far. I dont know why this issue with sound.
View 2 Replies
View Related
May 10, 2010
trying to get ALSA running on a mainboard with onboard Intel soundchip using the snd-hda-intel driver. aplay detects no devices and amixer says: "Mixer attach default error: No such file or directory". Tried everything from the ALSA troubleshooting manual but no success... why is the card not recognized?Here is the output of a debug script I found. Up to now I just did "configure;make;make install" with alsa-utils, alsa-lib and alsa-driver...
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code]....
View 5 Replies
View Related
Aug 7, 2015
I can't get the sound to work. The soundcard doesn't seem to be corrupted (works on both Hackintosh and Windows 8 ), but it looks like alsa won't recognize it on Debian:
aplay -l
aplay: device_list:268: no soundcards found...
View 4 Replies
View Related
Aug 3, 2010
According to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
Here's the hardware: cat /proc/asound/cards:
0 [Intel]: HDA-Intel - HDA Intel
HDA Intel at 0xd6400000 irq 34
View 5 Replies
View Related
Aug 23, 2009
i did the right thing and posted this on the mac fedora list, but it seems too few people hang out there and there were no replies at all for quite some time, so i have no other option but to try the general support list.problem:on both fc10 & 11, sound works within a browser e.g. [playing flash such as videos cnn and fox videos etc.problem is, as soon as i play a cd or a dvd, then the sound is completely dead afterwards.somehow dvd's and cds completely disables sound.
View 1 Replies
View Related
Jul 11, 2011
Just installed Fedora 15, using default options. Sound works through headphone jack but not thru pc speaker. (Machine has no external speakers.) Puzzling, since an identical hardware-wise machine with same /etc/modprobe.d files works fine.
[Code]...
View 8 Replies
View Related
Oct 23, 2010
Since upgrading to OpenSuSE 11.3 I no longer have sound.I remember having the same prob upgrading to 11.2, but for the moment, I'm at a loss.
View 8 Replies
View Related
Jul 26, 2011
I've got a Laptop with Intel video chipset. I've got a full slackware 13.37 installation and I'm using the huge-smp kernel all though it's not recommended. But I don't think the issue is kernel related. The problem is that it detects that there is a monitor connected to the s-video connector, but there is no picture on the screen. It doesn't matter what mode I use, but ideally I want cloning.
What happens when I use KDE and krandertray (or system-configuration for that matter) is that I can choose resolution and everything but no picture shows up on the TV. When I press the "Identify monitor" (Or something) button both the "1 TV1" and "2 LVDS1" shows up on the same monitor (laptop). That is weird.
Has anyone experienced anything similar or could point me in some direction as to what could be done?(I haven't had the chance to test modifications to xorg.conf quite yet, but I guess that should work. However, I think it's worth it to get rid of this bug)
View 7 Replies
View Related
Apr 18, 2011
I've been using it since it was put on current and have been having X crash on me repeatedly or getting a black screen from which I can only recover by a hard reboot. This is happening under a couple of different WMs without compositing (so this isn't the same issue that I was having with KDE and xscreensaver).
I'm using the i915 driver with stock 2.6.37.6, but I also tried a 2.6.38.2 kernel but had the same problem with both.
Here's a backtrace (for what it is worth):
Code:
[ 10161.149] 0: /usr/bin/X (xorg_backtrace+0x28) [0x4a02d8]
[ 10161.150] 1: /usr/bin/X (0x400000+0x60fc9) [0x460fc9]
[ 10161.150] 2: /lib64/libc.so.6 (0x7fd25616a000+0x340b0) [0x7fd25619e0b0]
[ 10161.150] 3: /usr/lib64/libdrm_intel.so.1 (drm_intel_bo_emit_reloc+0x0) [0x7fd254a2eb90]
[Code].....
View 14 Replies
View Related
Mar 4, 2010
I upgraded to -current last night hoping to improve my Intel 845G graphics controllers functioning in X, I've had to use the vesa driver for stability. The upgrade was completed but KDE seems as slow as ever. Here's some snippets from Xorg.0.log:
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux speedy 2.6.33-smp #2 SMP Sat Feb 27 20:12:16 CST 2010 i686
code....
It seems I'm still using the vesa driver, any ideas on why the intel isn't being used and how to fix it?
View 2 Replies
View Related
