My tftp server stopped working. I don't know why. I tried re-installation of tftpd-hpa, I tried to install another server: atftpd in its place.They don't function.(Debian Squeeze)
XXXXXXXXXXXX
HPA's tftpd: in.tftpd/usr/sbin/in.tftpd: unrecognized option '--address'
Starting HPA's tftpd: in.tftpdinvoke-rc.d: initscript tftpd-hpa, action "start" failed.
dpkg: error processing tftpd-hpa (--configure):
[code]...
I have configured tfpt server to work as xinet.d service.Below is conf file ftom /etc/xinetd.d/tftp
Code:
service tftp
{
socket_type= dgram
protocol= udp
wait= yes
[code]...
I have to make sure this service works, I tried to 'telnet server_name 69' but I get below error :
Code:
[root@ldap2 xinetd.d]# telnet localhost 69
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
How can I verify that this service works ?
Unable to start tftpd service after starting xinetd
View 9 Replies View RelatedWhat is the proper way to stop tftpd from starting up? There is no numbered rc script symlink for it so I can't use update-rc.d. I don't want to just hack a file unless that is considered "the way".
View 4 Replies View RelatedTftpd doesn't start with xinetd ,unable to catch where the error is ?
View 2 Replies View RelatedHaving a problem with tftpd on CentOS 5.5. I am only able to download files from the localhost address.
I have checked iptables (by adding rules and by turning the firewall completely off -- nothing changes) and enabled tftpd logging (by adding -v to the server_args section in xinetd.d/tftp) and I DO see the request coming in, but no response from the daemon. I've also tried upping the verbosity by adding multiple -vs and/or --verbosity 10 to the mix, but all I ever see is the initial request come in, nothing more. I've even tried running the daemon in foreground mode with -L but I get no verbosity then.
I have a problem with TFTP files greater than 32MB with Ubuntu. I haven't been able to find a fix for this issue. This has been a known issue for years and was corrected in the winodws world(AUGH !). when I did an apt-get install this morning it said my tftp was up to date.
View 1 Replies View RelatedI am learning Linux and especially the scripting and server administration aspect. I recently installed TFTPD on a Debian Lenny box and was satisfied with the results. The only drawback that I could find was that a file had to exist before TFTPD would allow a transfer. I understand that this is standard practice however I was wondering if there was a way around this. I am using this TFTP server to backup configurations and IOS images on our Cisco devices in a private network. If there isn't anyway to do this is there a different TFTP server that I could install that would support this functionality. I have read the man pages without much luck and doing Google searches hasn't yielded many results. I really appreciate your help and if there is anything you need from me please let me know./etc/inetd.conf fileQuote:
#:BOOT: TFTP service is provided primarily for booting. Most sites
# run this only on machines acting as "boot servers."
tftp dgram udp wait root /usr/sbin/tcpd /usr/sbin/in.tftpd -s
[code]...
I am not able to connect samba server from other linux pc giving error: NT Authentication Failure
But am able to access through anonymous login from linux Same is working fine will all smb users through windows. I am using rhel 5.
I am trying to install either Ubuntu or CentOS server in text mode only. The problem I am having is that the hardware that I am trying to install it on has no vga output, I can only connect to it via console cable. I am able to boot from USB CDROm or flash drive but unfortunately since the hardware does not have a gpu (atleast none that I'm aware of) I am unable to get past the boot screen. If someone can point me in the right direction or know where I would be able to download the text install of either OS, that would be awesome.
View 11 Replies View RelatedI have tftp-server running on Centos 5. Clients which are on the same subnet as the server are able to get and put without problems. I have a client that is across the internet that is having trouble getting files from my tftp server. A tcpdump reveals that the client is requesting the same file over and over again. In /var/log/messages, I am see the following error repeated over and over until the client finally gives up.
localhost in.tftpd[12727]: tftpd: read: No route to host
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
I am unable to use ncftp command I have defined all variables used. i have to copy the data to another server FTPS. When i am executing this command it is throwing error
ncftp -u : option unknown
I am copying total script what i am executing in my server. Please some one tell me is there any pistake in using the ncftp command , or tell me some other commands to copy data to remote server
BAK="/opt/DBbackups"
NOW=$(date +"%d-%m-%Y")
FTPU="username"
FTPP="password"
[code]....
We're running a sendmail server on a fedora core 9 which we've configured recently. The problem is, the server is working fine but there are some e-mails that enter our server but doesn't get forwarded to the user.
Quote:
Quote:
Here it says "stat=Sent" but nothing from the above mail address has been received on the client's inbox. We've experienced this with Microsoft Outlook, Outlook Express and Thunderbird alike so far with Two(2) of our user accounts.
I got this type of messages:k journald starting. commit interval 5 seconds.EXT3.fs:mounted file system with ordered data modefreeing unused kernel memory : 212 k freed.Warning:unable to open an initial consoleAfter this Server is not hang state but stay at same Anybody can help me how to resloved this type of issue.
View 1 Replies View RelatedI have two situations here :
1) I have my Nagios running on the linux box and BMC Remedy Server on the Solaris box. I have simulated a mail from Nagios to be delivered to the Remedy server. But the Remedy Server does not receive it. I even tried snooping on port 25 but nothing has reached the box.
2) I have my Nagios running on the linux box and BMC Remedy Server on the Solaris box. I have simulated a mail from Nagios to be delivered to the Remedy server. I snooped on port 25 on the Solaris box. I could see the mail reaching the box, but it is not being forwarded to the Remedy inbox.
I have set up DNS server set up on my RH 5.5 system. It is working perfectly as Caching only Server but but when i tried to make it a primary server for a zone it didn't resolved. I am actually a newbie so please correct me if i am wrong somewhere. Here are my configuration files code...
View 10 Replies View RelatedIn oreder to run an application software on RHEL 3 ES server, I created a link forcefully using following command from root id:
# cd /lib64/tls/
# ln -sf libc-2.3.4.so libc.so.6
before that I copied file libc-2.3.4.so from a workstation with OS RHEL 4 WS so that a link can be created.
Now I am unable to run any command except cd & pwd and it gives error messaage as given below:
ls:relocation error:/lib64/tls/libc.so.6:symbol _rtld_global_ro,version GLIBC_PRIVATE not defined in file ld-linux-x86-64.so.2with link time reference.
Before running this command libc.so.6 was pointing to libc-2.3.so file in path /lib64/libc-2.3.2.so.
I am now unable even to open a new window on the server.Please send me some solution as early as possible because this server is running production data and many users are runnig application on this server.
I followed the Wiki guide for configuring my Postfix server for SASL / TLS. I don't get any errors and I assume it's working but when I try and test SASL (saslauthd), I don't get the response noted according to the Wiki and I don't understand why.
View 3 Replies View RelatedI have installed proxy server on ubuntu.I have done every process which is needed to establish proxy server.internet is also working fine through proxy but the sites which needs to be blocked it is not blocking.it is opening.I have made entry of sites which i needed to be blocked in block_dstdomain file in proxy
View 3 Replies View RelatedI run my own mail server. There's only one part that isn't working and I can't seem to figure out why: sending mail from a client - in this case, Thunderbird.
I can send mail off-server just fine if I log in via telnet. I can receive email just fine with Thunderbird.
Here are my relevant configs:
/etc/postfix/main.cf:
Code:
queue_directory = /var/spool/postfix
message_size_limit = 102400000
mailbox_size_limit = 1024000000
command_directory = /usr/sbin
[Code].....
i m unable to ssh my one centos 5.6 remote server from my one server
Code:
ssh -v root@sxyz.abc.com
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code]...
i even turn off all firewall rules on both server i can able to ssh from my home or any other pc to remote pc so i don't think there is any problem in target pc
I'm trying to reboot the server (shutdown -r now).But it seems like nothing happened.
When I try "shutdown -c", the system prompts "shutdown: cannot find pid of running shutdown."
i have an problem regarding yum in fedora 14when i used todate or install any package,then i would get a problem but i unable to get it resolved this,theis follwing:::root@localhost amit]# yum update [ANY PACKAGE]Fatal Python error: pycurl: libcurl link-time version is older than compile-time versionAborted (core dumped)
View 2 Replies View RelatedI am trying to make a bootable DVD in RHEL5 but it wont let me write to DVD. I have tried following command to write to DVD:
cdrecord dev=/dev/hdc -v -eject /root/inst/images/boot.iso
dvdrecord dev=/dev/hdc -v -eject /root/inst/images/boot.iso
I am getting the following error message when I run the above commands:
Error trying to open /dev/hdc exclusively... retrying in 1 second.
cdrecord: For possible targets try 'cdrecord -scanbus'
cdrecord: Device or resource busy. Cannot open '/dev/hdc'. Cannot open SCSI driver.
I have also checked /dev/ directory and cdrom is linked to hdc and cdrom-hdc.
I would like to ask the expertise here about this issue which I am having at the moment. I am unable to VNC to my server. I have configured all the necessary steps to enable the vncserver. But there will be an error stating "main: unable to connect to host: No route to host (113". I have checked on my network side which I did not block any what so ever port on the firewalls and the switches. I am able to ping the server but the main problem is that I am unable to remote VNC to that server. I have several servers which I have configured with the same configuration and only that particular 1 server that could not VNC. This is getting frustrating.
View 3 Replies View RelatedWe are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
I m facing a very strange problem while installing F10 from my NFS server , on the other hand i can sucessfully mount the directory from nfs server to client , but fail to install F10 from the same server,i created the F10 ISO image in the /mnt directory and share it via nfs server.
here this is my Exports Directory
/mnt/ 192.168.10.0/24(rw,sync,no_wdelay)
I'm having a problem connecting to my server with ssh.I'm running the latest Ubuntu 9.10 32-bit server, inside a virtual machine on a Mac (VMware Fusion 3, running on OS X 10.6.2 with 64-bit kernel).I've set up a network interface (eth2) to act as a host-only network between the virtual machine and the host.I can ssh into the server from my Mac when I type in its IP address ssh root@[IP address] BUT, I can not connect to the server.do I need to open a port with ufw? or configure something else in the ssh settings?
View 1 Replies View RelatedThis is where I stand at this time. I have used the MD5SUM on the Ubuntu files for 10.10 server both the I386 and the AMD64, and the Desktop I386. All three passed as being non compromised files. I then burned the files on CD's using infrarecorder as the web site shows.
Machine 1:
Asus M2N68-AM Mother board and Athlon processor
Western Digital 1tb hard drive
1 gb memory
64 bit
[code]....
I am question if the fact that the motherboard does not have a built in video card if that is a problem with this machine. I can not get to any screen on either of these CD's to do the Ubuntu "checks" Since the server version does not load or work correctly on either machine I am asking if there is a problem with the server package as distributed. Since the desktop works on Machine 1 it makes me think even more that there is a problem with the server packages. I have used all the tools that are available through Ubuntu to the best of my ability. With what I see I am thinking that there is a problem with the image used for the server. I would stay with 9.04, but there is not way to update this package.
