I followed the Wiki guide for configuring my Postfix server for SASL / TLS. I don't get any errors and I assume it's working but when I try and test SASL (saslauthd), I don't get the response noted according to the Wiki and I don't understand why.
View 3 RepliesI did a a basic install of postfix and dovecot instead of using courier-pop and courier-imap. This is only send and receiving e-mail locally within the test network 10.7.0.X and 10.0.0.X. I used:
[URL]
my postfix.conf is;
PHP Code:
[code]....
This is the error when I send an email from a local machine on the 10.0.0.X network.
PHP Code:
Jan 20 17:05:48 testbox postfix/smtpd[2491]: warning: Illegal address syntax from unknown[10.0.0.111] in MAIL command: <test@10.0.0.112>
I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
I'm trying to expand my Courier+MySQL+Postfix+PostfixAdmin server to use SASL logins on Postfix so I can relay on my server. After following several guides I still can't get it to work: Postfix logs show the user transcript and end with "Authentication failure" but it does not tell me what told it that the login failed. The messages log show this:
Feb 19 22:48:55 sportlaan-server saslauthd[7254]: do_auth : auth failure: [user=berend] [service=smtp] [realm=mydomain.com] [mech=pam] [reason=PAM auth error] Which I don't get because I don't think it should be using PAM... I think...
The setup is similar to this one: http://www.howtoforge.org/virtual_users_postfix_courier_mailscanner_clamav_centos_p6
My SASL config has this in it:
/usr/lib/sasl2/smtpd.conf
pwcheck_method: saslauthd
log_level: 3
authdaemond_path: /var/spool/authdaemon/socket
mech_list: plain login
We have CentOS 5.3 and are using sendmail for outbound emails. We are trying to switch over to authsmtp service. Authsmtp requires sendmail built with SASL suport.
How do I find out if my sendmail has been built with SASL support? If it is not, is it easy to build it with SASL support?
I am setting up a cluster of servers which use Centos Directory Server for control of logins, etc and kerberos for authentication. The basic setup is working fine, I have been able to manually create accounts using the directory console and these accounts seem to work. Now what I want to do is automate the process of creating new accounts. I am writing a perl script which can be run by one of the server administrators, they supply a small number of arguments and it should create a new user in the directory server, and also create a principal in the kerberos.
I want them to be able to do this using their logged-in kerberos credentials, i.e., without having to enter and re-enter their passwords. My first attempt was to use perl modules Net::LDAP and Authen::SASL. I could not get this working so fell back to using ldap command line tools, but even these I cannot seem to get working! When using mozldap tools, as specified in the admin manual, I get the following:
$ /usr/lib64/mozldap/ldapmodify -h ldaphost.mycompany.com -D uid=eharmic,ou=mydept,dc=mycompany -o mech=GSSAPI -o authid=eharmic < ../ldapmod.txt
Bind Error: Invalid credentials
Bind Error: additional info: SASL(-14): authorization failure:
Using openldap tools I strike exactly the same problem:
$ ldapmodify -Y GSSAPI -H LDAP://ldaphost.mycompany.com -D uid=eharmic,ou=mydept,dc=mycompany -U eharmic < ../ldapmod.txt
SASL/GSSAPI authentication started
ldap_sasl_interactive_bind_s: Invalid credentials (49)
additional info: SASL(-14): authorization failure:
I believe I have set up the mapping correctly:
dn: cn=MyMapping,cn=mapping,cn=sasl,cn=config
objectClass: top
objectClass: nsSaslMapping
cn: MyMapping
nsSaslMapRegexString: ^(.+)@MYCOMPANY.COM
nsSaslMapBaseDNTemplate: ou=mydept,dc=mycompany
nsSaslMapFilterTemplate: (uid=1)
It must be getting reasonably far because after doing the above I can see the LDAP service ticket in my "klist" output.
I was reading over and checking the How to section on the Wiki for Postfix TLS / SASL. I followed it completely and everything seems to be working fine however I am confused about the following section:
smtpd_tls_security_level = may
smtpd_tls_key_file = /etc/pki/tls/private/mail.example.com.key
smtpd_tls_cert_file = /etc/pki/tls/certs/mail.example.com.cert[code].....
Ehlo command not recognizing while sending test mail to outside network from postfix. When I am trying to test a mail within the network it is successfully happening ehlo.
View 2 Replies View RelatedThe thing is we have 2 servers one is bugzilla + proxy other is mailserver (internal)
The thing is when my dev team files any bug the bugzilla can't send mail to a user user@test.local.com
P.S:i am actually having problems since the sudden power cut and server restarts
the local mail server is having zimbra package installed
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
I have installed F11 on my server bythis article! I have problem with certificatewhen I connectin from clients computers to my mail server for reciving mail! I have warning like this
View 2 Replies View RelatedI have one server at home, connected through a router that gives me a static IP:192.168.1.2 - My PC192.168.1.3 - CentOS serverI enabled the port 80 into router forwarding system and I can connect properly to CentOS server, using the IP my internet provider gives me. My router automatically forwards a changed IP to my dyndns.com account so I can also access the server through a domain name (I pay to have it linked to one of my domains).My next step is to configure the mail server (dovecot) , so I can send emails from my local server(192.168.1.3).I was wondering if anyone has any tutorial links or tips to have the mail server configured through a home internet provider + home router.
View 5 Replies View RelatedCould it be the IMAP file is corrupt?I have set up mail server on Centos to receive via dovecot.One of my user accounts (A single account out of a hundred)cannot receive their mails.
View 3 Replies View RelatedI am running a CentOS 5.6 Server with a website and Forum. The website has a contact form and users can email various people in the organization. I have setup sendmail to send any mails like this to my email address on a Windows machine.The problem is that there emails don't have a header which has the senders original email header. It comes from localhost on my sendmail. How can I get any mail generated from the apache site to ALSO send mail to root on the Centos Server? That way I should be able to see the header and report the spammer or block them.
View 2 Replies View RelatedWhat is the easiest way to setup an incoming and outgoing mail server on centos? Without using a control panel, such was webmin.
View 2 Replies View RelatedI try to install SSMTP mail server on Centos 5.4 and I have a following error >>
[Code]....
i have successfully done the setup of postfix and dovecot on this link [URL]I run Cent OS on top of window 7 via VM Player,i want to access mailbox from windows 7 using email client like Thunderbird and Outlook. What setting i need to do in my mail server ?
View 1 Replies View RelatedI am using Postfix on CentOS to send mail through a relayhost. The mail sends fine, but on certain clients such as the mail client on the iPhone or Windows Live Mail, the message is received with '(No Sender)' in the sender field. The Apple Mail client on the iMac works just fine.
Here is the PHP code I am using to send the mail code...
Wondering if there is a configuration setting in /etc/postfix/main.cf I can use to fix this problem. I have scoured the help files but have come up empty.
Having my Diploma Final Project on setting up a virtual mail server within Local Area Network (LAN) only.I had follow this how-to http://www.linuxmail.info/squirrelma...o-in-centos-5/ and complete up to squirrealmail web mail. I added two new user to try on sending and receiving mail. It works.I run CentOS on VMplayer. I using my laptop to do all the stuff, the laptop default OS is windows 7, i install VM player on it and run CentOS inside the VM Player.I want to do testing on Windows 7 side by installing Thunderbird email client program, i want to connect to mail server with SMTP, IMAP/POP3 using the email service. I have problem while setting up user account on Thunderbird, Thunderbird seems like cannot detect my CentOS mail server. How ?
Do i have to do any other configuration on CentOS ? any DNS ? port number for IMAP,POP3 or SMTP ?
I just recently purchased a vs from a company and i am trying to set up a web site on it with kloxo and set up the mail for it upon setting up the mail settings it says:
"It is very essential that you set the my name to a properly resolvable hostname, since otherwise, many public mailservers like hotmail will reject mails from your server"
Now this is my first time setting up a vs before i have set up linux vm's to get email access but that was about a year ago.
Our mail server keeps on hanging after a while. This happened after there was a breakdown in electricity supply and the server room air conditioners stopped working for almost half a day. We are not sure whether this is a server hardware problem or a coincidence with a break-in attempt or malware activity.
Following are the message from the server log code...
I have to administer a few mail servers, a mail log server, 4 nameservers and a web server -all running on Centos 5 server distributions. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and mail log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves. I have already installed VMWare Server 2.0 I have a few questions:
- How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program?
- How do I actually do this cloning? Is there a tutorial on how to do this?
i'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies View RelatedCan this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
We have 2 mail server & handling by 2 different company.1 of that mail server is not pointing to our DNS. how can I add that on our DNS Servers. So that we don't need to pay them for the DNS also.
View 1 Replies View RelatedNewbie on the block with Centos 5.3 on a test server and and Ubuntu on a test workstation Note the wiki on VNC for a windows workstation but presume I could do this more easily from "Jaunty" (Ubuntu v 9.04)
View 10 Replies View RelatedThis message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
xx@xx.com
SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies View Relatedi'm setting up apache on 5.3. i can access the apache test page without a problem from the server via URL... But i can't figure out how to access this page from another computer within the domain (for when i upload my home page.
View 4 Replies View RelatedHow do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies View Related