I have a problem with TFTP files greater than 32MB with Ubuntu. I haven't been able to find a fix for this issue. This has been a known issue for years and was corrected in the winodws world(AUGH !). when I did an apt-get install this morning it said my tftp was up to date.
View 1 RepliesMy tftp server stopped working. I don't know why. I tried re-installation of tftpd-hpa, I tried to install another server: atftpd in its place.They don't function.(Debian Squeeze)
XXXXXXXXXXXX
HPA's tftpd: in.tftpd/usr/sbin/in.tftpd: unrecognized option '--address'
Starting HPA's tftpd: in.tftpdinvoke-rc.d: initscript tftpd-hpa, action "start" failed.
dpkg: error processing tftpd-hpa (--configure):
[code]...
I have a Ubuntu NAS set up with two 1.5TB in a mirrored array. We recently needed more storage and will constantly be adding to this machine. We added 2 2TB drives in a striped array. What I'd like to do is find all directories totaling 10GB+ on the mirrored array and move them over to the striped array to increase storage on the mirrored array for smaller, more important data. I've tried:
Code:
find /mirror -maxdepth 1 -size 10G
find /mirror -size 10
[code]....
I need to search in "/" and all subdirectories, all files greather than 30 MB.
View 5 Replies View Relatedwe are running a Red Hat Enterprise Linux ES release 3 (Taroon Upd 5) Kernel 2.4.21-32.ELsmp since several years. The server hosts an old ERP system who will be replaced at the end of the year.However it is necessary that some collegues are able to write some files to that server regulary. Since we are running Windows 7 on several machines, those users aren't anymore able to write to the samba share. Getting files from the share works fine.
But the problem seems not to be situated at the samba service because also the transfer using SSH (WINSCP) from any Win7 system to the server doesn't work.During testing we recogniced that transfering files smaller then 1kb works fine ... any file greater then 1kb ends up in an connection abort. This works with samba and also using SSH.All the workarounds editing some registry entries in Win7 for improving the interoperability between vista / win7 and samba don't work for us ... and also seem not to be the source of the problem.Is there a general known incompatibility between our RHEL version / kernel and Windows 7 regarding file transfers?
I got an old PC at home , Pentium MMX 166Mhz 32MB RAM
Which distro work best with an old machine like above?
Purpose:- Internet & Download
- Basic File Server maybe for the rest of Windows machines.
Machine Specs:
- Intel Pentium MMX 166MHz
- 32MB Ram
- HDs: 2GB
- DVDrom
I've been using ubuntu for a while and I am comftable with it's interface.
I've recently been trying to resurrect an old laptop and so I brought a new HDD to replace its broken one. I then figured that Windows would probably be too resource hungry to run on the laptop and so thought I should try to run a Linux Distro instead but now I've hit a wall. I can't find a distribution that will install on this low a spec PC but also will enable me to use the wireless card I've specified, even though the card has Linux drivers bundled with it.
View 6 Replies View RelatedWhat is the proper way to stop tftpd from starting up? There is no numbered rc script symlink for it so I can't use update-rc.d. I don't want to just hack a file unless that is considered "the way".
View 4 Replies View RelatedHow to configure X Window on opensuse 11.4 and older x86 hardware with 32MB graphic card?
View 9 Replies View RelatedI have configured tfpt server to work as xinet.d service.Below is conf file ftom /etc/xinetd.d/tftp
Code:
service tftp
{
socket_type= dgram
protocol= udp
wait= yes
[code]...
I have to make sure this service works, I tried to 'telnet server_name 69' but I get below error :
Code:
[root@ldap2 xinetd.d]# telnet localhost 69
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
How can I verify that this service works ?
Tftpd doesn't start with xinetd ,unable to catch where the error is ?
View 2 Replies View RelatedHaving a problem with tftpd on CentOS 5.5. I am only able to download files from the localhost address.
I have checked iptables (by adding rules and by turning the firewall completely off -- nothing changes) and enabled tftpd logging (by adding -v to the server_args section in xinetd.d/tftp) and I DO see the request coming in, but no response from the daemon. I've also tried upping the verbosity by adding multiple -vs and/or --verbosity 10 to the mix, but all I ever see is the initial request come in, nothing more. I've even tried running the daemon in foreground mode with -L but I get no verbosity then.
I am learning Linux and especially the scripting and server administration aspect. I recently installed TFTPD on a Debian Lenny box and was satisfied with the results. The only drawback that I could find was that a file had to exist before TFTPD would allow a transfer. I understand that this is standard practice however I was wondering if there was a way around this. I am using this TFTP server to backup configurations and IOS images on our Cisco devices in a private network. If there isn't anyway to do this is there a different TFTP server that I could install that would support this functionality. I have read the man pages without much luck and doing Google searches hasn't yielded many results. I really appreciate your help and if there is anything you need from me please let me know./etc/inetd.conf fileQuote:
#:BOOT: TFTP service is provided primarily for booting. Most sites
# run this only on machines acting as "boot servers."
tftp dgram udp wait root /usr/sbin/tcpd /usr/sbin/in.tftpd -s
[code]...
Unable to start tftpd service after starting xinetd
View 9 Replies View RelatedI just bought a 3TB drive to use for backups and I'm getting a strange message when I run fdisk to get a listing of the drives.Here's what fdisk says about the 3TB drive:
Code:
Disk /dev/sde: 3000.6 GB, 3000592977920 bytes
255 heads, 63 sectors/track, 45600 cylinders
[code]....
I'm getting an error when I try and zip a large file on Linux because it is too large for zip to deal with. what commands I can use to get around this?
This is the error I'm getting:
zip error: Entry too big to split, read, or write (file exceeds Zip's 4GB uncompressed size limit)
It is a simple text file, log file in fact.
I need to run some software that seems to only work with Win2002, XP or greater OS.
Does Ubuntu have a flawless Windows emulator that is easy to use so I can use the software?
I've recently completed a fresh install of 10.04 on a home file server and upgraded the hard drives in my storage array. My PREVIOUS hardware was:
Old version of Ubuntu (I forget which one exactly, but I know I had missed a few upgrade cycles)
3X 500 GB Seagate Baracuda's (for the array)
Areca 1220 Hardware RAID controller
Intel Core 2 Duo 6600
320 GB Seagate for the boot drive
I was running that hardware for about five years or so and it was rock solid. After the upgrade the hardware specs are:
Ubuntu 10.04
Areca 1220 hardware RAID controller
4x 1000GB Samsung
Intel Core 2 Duo 6600
320 GB Seagate for the boot drive.
The fresh install of Ubuntu 10.04 went remarkably well. The drivers for that raid controller are in the kernel, which is great. I was able to access the old array after upgrading Ubuntu. Now I am trying to create a new array with the four 1000 GB drives in a RAID 5. Obviously that gives a maximum storage capacity of 3 TB, greater than the 2 TB threshold that seems to be so important. I've been doing some digging and here is where my questions start:
it appears as though gparted doesn't support file partitions greater than 2 TB, correct?
it also doesn't seem as though parted supports ext3 or ext4, is that correct?
If this is the case, how do I create a partition with ext4 that is greater than 2 TB?
I can see the array volume in gparted (which is a relief) but it lists the size as 2.73 TiB, which I find curious because that is over 2 TB, but not the full capacity of the volume. I can also get to the volume in parted. But I see in the parted documentation that using the makepartfs command is discouraged and instead, one should use the command mkpart to create an empty partition, and then use external tools like mke2fs ( to create the filesystem.
how to proceed from here. What does the community think is the best course of action to create a partition of 3TB in ext4? Then I need to change fdisk to automatically mount the array at every log in, right?
I am totally new to unbuntu, I am trying to download ubuntu desktop but the message from IE 9 returns that "download greater than 12 hours"and that is that! my dsl connection is 6Mb and I do not know what to do.
View 4 Replies View Relatedi want to install centos on a 3TB raid but during the installation, it said it could not boot GPT partition.
View 1 Replies View RelatedI have a huge RAID6 array 21TB+ already partitioned in GPT. This is to be used as the storage location for my company's backup server, and I want to access it as one logical volume. Is this possible with Centos5? I just discovered the product specifications for Centos5, and saw that the maximum file system size is 16TB, but LVM2 should support volumes up to 1EB. Is there any way I can make this work in Centos, or am I going to have to run a different distro?
View 1 Replies View RelatedI have an Apple Aluminium keyboard. To the left of 1 key I have the less/greater (< >) key, not grave/tilde (` ~). xmodmap does not work for me: layout switching (done with setxkbmap) resets my xmodmap changes. .Xmodmap file does not help either. How do I remap the tilde key?
View 1 Replies View Related1. How sum of system time and user time can be greater than real time ?
2. Even though my program is not waiting for any I/O the real time is smaller than system time as shown
root@chaitu:/home/chaitu/Desktop/Chk# time ./new
real0m0.001s
user0m0.000s
sys0m0.004s
I'm using Fedora 13 , wireless card:Intel 512AN_MMW kernel version:2.6.33.6-147.fc13.i686 below is my problem: when i finished install F13,i can use Wireless card surfing internet i have multiple ap's , and if the ap set with same ssid and different channel, i can roaming between ap's if i'm accessing the internet ,
otherwise, it won't change to greater signal ap if i'm not using the internet , does this condition normally ?
The other question is , if i'm using different ssid , like "wlan01" "wlan02", can i roaming between this two ap's automatically?
When i try to run pitivi i get the following message and it closes down. "Install a version of the GStreamer Python bindings greater or equal to 0.10.19" without the quotes.What do I need to do? Where is the deb package for gstreamer needed?
View 9 Replies View RelatedI installed 10.4 on my Satellite Pro via CD replacing XP. Screen resolution is now only 800x600 which fills only 3/4 of available screen space and there are no greater options in System Preferences Monitors. It is also operating rather slower than the previous OS, maybe these two issues are connected? I have checked Administration for any required Proprietary Drivers. There is just one for a modem which is activated. During installation I aborted it then closed down and restarted, which may have affected the process?
View 8 Replies View RelatedI was just testing specifying limit on file size to a user and have added the following to /etc/security/limits.conf bob soft fsize 100 This basically should have said not to allow bob to create anyfile greater than 100Kb in size.
But the interesting thing is, if bob already has any file which is greater than 100Kb in size, it even doesn't allow to log him into the system both from console and SSH. Also nothing is logged in logs.. How do I configure it so that, bob can login to the system even though he has any file greater than 100Kb (but doesn't allow him to create file which are greater than 100Kb) ??
Does Fedora 13 support a boot hard drive greater than 2TB ? I am planning to get 2x 1.5TB for RAID for a boot drive so I just want to find out first whether it will be a lot of problems just to set up it as boot drive. Thanks b4 for all the answers.
View 9 Replies View RelatedI am having a heck of a time trying to find directions on networking my two computers together in order to share files. I have two machines running Ubuntu 10.10 Desktop & Netbook remix.
They are both connected to my wireless router to connect to the internet.
I get a SD card. Put in the SD reader. It's empty. I go to my super-important-pictures-to-a-monthly-relatory folder and select all files. Select them for MOVE. Paste them on the SD card. When the move/paste process is finished, i click on the "Eject" button on top of the SD card name. Card's ejected. I can't access the card anymore. I take out the card and put on my other computer. From 300 pictures, there are only 10 available, the remaining ones are there, but with 0bytes and unrecoveable. I panic. I go back to my main computer, my pictures are not there anymore. The pictures were on the Home folder. I panic again. I reset the computer and boot on the LiveCD. I install foremost, scalpel, photorec and about everything till my USB drive complains about being filled up. I run everything and I can't recover my files. I'm in the danger of getting fired. Things like that makes Windows sounds more appealing. When you securely remove a pendrive, things get REALLY pasted there before screwing everything up with a removal.
View 8 Replies View Related