What is the proper way to stop tftpd from starting up? There is no numbered rc script symlink for it so I can't use update-rc.d. I don't want to just hack a file unless that is considered "the way".
View 4 RepliesUnable to start tftpd service after starting xinetd
View 9 Replies View RelatedAnyone know how to stop the pureftpd starting up automatically? I've tried the usual in /etc/init.d/pureftpd but it still starts and I need to log in and close it in the admin UI or in terminal.
View 2 Replies View RelatedMy tftp server stopped working. I don't know why. I tried re-installation of tftpd-hpa, I tried to install another server: atftpd in its place.They don't function.(Debian Squeeze)
XXXXXXXXXXXX
HPA's tftpd: in.tftpd/usr/sbin/in.tftpd: unrecognized option '--address'
Starting HPA's tftpd: in.tftpdinvoke-rc.d: initscript tftpd-hpa, action "start" failed.
dpkg: error processing tftpd-hpa (--configure):
[code]...
I have a Ubuntu desktop install I would like to stop X11 from starting up on bootup. I want to do this to try to set up stand alone xbmc and Mythtv without X running since it is a low spec machine. (appleTV)
Is it just a rc file I need to edit ?
My question is, how do I stop Skype from automatically starting up in Ubuntu 9.10 (Kernel 2.6.31-17-generic).
Skype is not in "System" "Startup Applications". If placed there two sessions Start.
Ubuntu 9.10
Acer 7736
This machine has a combined key/indicator light to turn the wireless networking on/off The change of state of the switch is detected by software with the switch off iwconfig shows
[Code]...
A server like Lighttpd or Apache starts automatically at boot after you install it. How do I stop it from auto starting? I'd prefer to manually start it when I need it.
View 1 Replies View RelatedRunning Ubuntu Server, installed xubuntu-desktop, but I don't want it to start up every time. How can I stop X from starting automatically?
View 7 Replies View RelatedI am tring to stop avahi from starting and running at all.I use kill PID and killall avahi-daemon and it will not go away, it comes back with a new PID. Does anyone know a way of stopping it?
View 2 Replies View RelatedI would like to stop network manager from starting up on boot. I have tried moving
Code:
/etc/init.d/network-manager stop
to rc.local and it did nothing but boot me into the CLI
I have also tried to put
Code:
sudo service network-manager stop and that did nothing also.
After I get network manager to stop on boot up. How do I make it so it will not auto connect to networks? My computer keeps on joining a different network on boot up. And I don't like this as some times I go to my banks website and I am on there network with out realizing it (because of the auto connect) Is there a way to stop this also?
After experimenting with wicd I've gone back to network manager. All is well on the networking front however I am having trouble stopping wicd completely.I've stopped it starting up the daemonchkconfig --list | grep wicdreturns emptybut when my kde windows starts up the wicd try icon start up.
View 9 Replies View RelatedI recently upgraded to zenwalk 6.2 and xscreensaver now starts automatically so i have to input my password whenever i shut and reopen my laptop lid. how can i stop it from auto-starting.
View 3 Replies View RelatedI have a certain process (or processes) and I want to wait for them to finish before launching another one. Do I have to make a while loop checking the process for this task or is there a ready command for it?
View 3 Replies View Relatedmy mouse is not being seen so I need to log in without the xsession autostarting to get a cmd line login.
my account will not let me login with my passd so the console is my only access with root but i cannot do anything withourt a mouse.
1. How can i get logged in?
2. How can I stop xsession from autostarting on a reboot once i get loged in i can try to remove that setting and boot the box.
3. secure session lets me in but the xterm is not active so I cannot type any commands.
i have installed mysql and its running fine. how i can stop mysql from auto starting when i start my machine
View 2 Replies View RelatedI'm running Ubuntu 10.10. I recently installed the open ssh server so that can sftp stuff. However, I do not want the server to always be on, only when I manually start So, I did an 'update-rc.d -f ssh remove'and now I don't see any startup scripts in the rcx.d directories any more.However, when I do a 'ps ax', there is always a '/usr/sbin/sshd' process running. I try to kill it but it keeps restarting under a different process ID.How do I disable sshd?
View 3 Replies View RelatedHow to stop starting daemons at boot time? For example:rc.bluetooth
View 3 Replies View Relatedhow do i stop eth0 from starting up when i boot/login ??
View 4 Replies View RelatedI have a problem with TFTP files greater than 32MB with Ubuntu. I haven't been able to find a fix for this issue. This has been a known issue for years and was corrected in the winodws world(AUGH !). when I did an apt-get install this morning it said my tftp was up to date.
View 1 Replies View RelatedI have configured tfpt server to work as xinet.d service.Below is conf file ftom /etc/xinetd.d/tftp
Code:
service tftp
{
socket_type= dgram
protocol= udp
wait= yes
[code]...
I have to make sure this service works, I tried to 'telnet server_name 69' but I get below error :
Code:
[root@ldap2 xinetd.d]# telnet localhost 69
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
How can I verify that this service works ?
Tftpd doesn't start with xinetd ,unable to catch where the error is ?
View 2 Replies View RelatedHaving a problem with tftpd on CentOS 5.5. I am only able to download files from the localhost address.
I have checked iptables (by adding rules and by turning the firewall completely off -- nothing changes) and enabled tftpd logging (by adding -v to the server_args section in xinetd.d/tftp) and I DO see the request coming in, but no response from the daemon. I've also tried upping the verbosity by adding multiple -vs and/or --verbosity 10 to the mix, but all I ever see is the initial request come in, nothing more. I've even tried running the daemon in foreground mode with -L but I get no verbosity then.
I am learning Linux and especially the scripting and server administration aspect. I recently installed TFTPD on a Debian Lenny box and was satisfied with the results. The only drawback that I could find was that a file had to exist before TFTPD would allow a transfer. I understand that this is standard practice however I was wondering if there was a way around this. I am using this TFTP server to backup configurations and IOS images on our Cisco devices in a private network. If there isn't anyway to do this is there a different TFTP server that I could install that would support this functionality. I have read the man pages without much luck and doing Google searches hasn't yielded many results. I really appreciate your help and if there is anything you need from me please let me know./etc/inetd.conf fileQuote:
#:BOOT: TFTP service is provided primarily for booting. Most sites
# run this only on machines acting as "boot servers."
tftp dgram udp wait root /usr/sbin/tcpd /usr/sbin/in.tftpd -s
[code]...
I have set up a new IP specifically for SSH and configured SSHD_Config accordingly to listen on this new interface and a specific port. However when I reboot SSH is not starting. Looking in the syslog it shows that it is unable to start. It looks like its trying to listen on the interface before it is set up.
Code:
Nov 29 13:00:23 anubis init: ssh main process (601) terminated with status 255
Nov 29 13:00:23 anubis init: ssh main process ended, respawning
Nov 29 13:00:23 anubis init: ssh main process (610) terminated with status 255
Nov 29 13:00:23 anubis init: ssh main process ended, respawning
Nov 29 13:00:23 anubis init: ssh main process (618) terminated with status 255
Nov 29 13:00:23 anubis init: ssh respawning too fast, stopped
I am able to start SSH manually once the server is booted. Do I need to set up my interfaces differently to ensure they are available prior to SSH starting somehow? I don't want to change my ssh config to listen on all addresses.
How can I start multiple X servers by logging into same user and using same desktop environment like KDE or GNOME. Is this possible by editing .xauthority, .xinitrc etc files?
View 1 Replies View RelatedMy mysql server won't start on my machine. It simply fails with no errors.
Code:
sudo /etc/init.d/mysql restart
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [fail]
When I run cat /var/log/mysql.err the file is empty, thinking this might be a permissions issue
I tried chowning to a mysql user. Here's the current permissions.
Code:
ls -alh /var/log/mysql*
-rw-r----- 1 mysql adm 0 2009-09-30 11:08 /var/log/mysql.err
-rw-r----- 1 mysql adm 0 2010-01-15 09:07 /var/log/mysql.log
-rw-r----- 1 mysql adm 20 2009-11-25 07:35 /var/log/mysql.log.1.gz
-rw-r----- 1 mysql adm 20 2009-11-24 07:59 /var/log/mysql.log.2.gz
-rw-r----- 1 mysql adm 20 2009-11-23 07:56 /var/log/mysql.log.3.gz
-rw-r----- 1 mysql adm 20 2009-11-22 07:54 /var/log/mysql.log.4.gz
-rw-r----- 1 mysql adm 20 2009-11-21 07:47 /var/log/mysql.log.5.gz
-rw-r----- 1 mysql adm 20 2009-11-20 07:43 /var/log/mysql.log.6.gz
-rw-r----- 1 mysql adm 20 2009-11-19 07:35 /var/log/mysql.log.7.gz
/var/log/mysql:
total 8.0K
drwxrwsrwx 2 mysql adm 4.0K 2009-09-30 11:08 .
drwxr-xr-x 16 root root 4.0K 2010-01-15 10:24 ..
Still having the same issue, mysql server is still failing and /var/log/mysql.err is still empty.
I am having problems with bond0 starting at boot on ubuntu server 9.10. After I do a restart I have to manually start the network with "ifup bond0". I have installed the built package (ifenslave-2.6_1.1.0-15ubuntu1_i386.deb (as indicated in Bug #482419)).
I have setup bonding for mode=6 with miimon=100 using eth0 and eth1 (both are Intel 10/100/1000 ports using an aic79xx network driver).
The contents of the aliases file are:
alias bond0 bonding
options bond-mode=6 miimon=100
The contents of the interfaces file are:
auto bond0
iface bond0 inet static
address 192.168.15.60
netmask 255.255.255.0
gateway 192.168.15.1
slaves eth0 eth1
bond-mode 6
I have it downloaded (linux version). What folder should I put it in?? Does it matter?
I am new to bash so i dont know how to start the Ventrilo Server up.
I navigated to the folder the server is in and did ./ventrilo_srv and ./ventrilo_srv -d and they both come up "No such file or directory".
How would I make sure cron is running every time my server is turned on? I want to make cron jobs, but I need to know that it is running when the server boots. Also, I used a program at some point that was terminal based and it showed be what programs ran when the server booted up. It allowed me to check a box and select which programs I could run at boot. If someone could tell me this program,
View 2 Replies View Related