Server :: MythTV -- Scan Gets Stuck On Channel 22?
Mar 20, 2010
I know that my tuner is working as i can watch tv in xawtv.
The hardware I'm working with:
P4 2.8GHZ
512MB Ram
Hauppauge 44981
I have added the card as both V4L and MPEG4 (I'm unsure which I'm supposed to use).
I setup the source to have "no grabber", and then set up input, when I do this, for V4L, there is no "Scan for Channels" option, when i set up input for MPEG4, there is that option, but when I click it i get an error, "Failed to open the card", but I can change the input on that page to the V4L input, i hit scan for channels, it scans and adds channels up to channel 22, where I get "No Lock"; it doesn't seem to do anything else from there.
So, how should I be using this card, and how can I know when its working with mythtv?>
View 4 Replies
ADVERTISEMENT
Jun 28, 2010
I have a PowerPC installation (fully patched) of Ubuntu 10, and I pulled down the MythTV suite on top (since there is no Mythbuntu/PPC that I found). I'm having an issue where after I scan for channels with my tuner using mythtv-setup, I can't set the starting channel number. Its almost as if nothing ever populates into the drop down. This seems to be specific to the combination that I have - Ubuntu 10 + PPC + Myth 0.23. If I use another x86 + Myth .21 and the same Tuner (HDHomeRun), I can set the starting channel fine. A Mac OS 10.4 + Myth .21 also allowed me to set the channel. I've rebuilt this install twice now and it won't allow me to set it. I can see the scanned data in the mythconverg database, so I know its there.
View 1 Replies
View Related
Nov 8, 2010
I have an old Fisher VHS player with the old 'antenna' connection [one wire] to the TV. It does still work. I connect this to an old Hauppauge 250 pvr card in a box running Ubuntu 10-10.
I want to be able to put old tapes on my disk drive.
Working mainly with MythTv, I can not get it to work. The hardware seems to be working as I have options for tuner1 and other inputs. As channel 4 is no longer 'broadcast' I can't scan for it even with the VCR running.
Would someone please hold my hand an provide the necessary steps to get MythTv working or an alternative.
I have read the five similar threads and numerous other google hits but can't find what I need. Part of my problem is I am also new to Ubuntu and jumping in an out of terminal sessions is no where near what I grew up with in Slackware.
View 2 Replies
View Related
Mar 26, 2011
I have a netbook with a onboard WIFI card(Broadcom 5727(rev 01)) and a Realtek RTL8191S USB WIFI donge. Both work.
My problem is; I can't get these to scan for AP's running on channel 12 and 13.
Is there a way to fix this?
Distro: Slackware 13.1
Kernel: 2.6.33.4-smp
View 1 Replies
View Related
Jun 25, 2011
PC seems to run fine in single channel mode but monitor reports no input in dual channel mode and memtest86+ lists from 1-3 errors per pass in single channel mode. Motherboard (Gigabyte P43T-ES3G) can't be set for the 1.65 volts required by the RAM (2x2 of OCZ3P1333LV4GK PC3 10666). The mobo voltage choices are 1.6 or 1.7 volts. I have tried both and increased the MCH voltage from 1.1 v to 1.2 v, but so far can't get it to run in dual channel mode at all and single channel mode seems to run fine but I still get errors in memtest86+. Also tried optimized Bios settings and loosened memory timings (from 7-7-7-16 to 8-8-8-27 and tRFC 60 to 70) and reset Command Rate from 0 to 2. CPU is Core 2 Quad @ 2.4 Ghz, PSU is rated at 400 watts, Video card is Gigabyte GT220.
View 2 Replies
View Related
Jun 29, 2011
I'm trying to crack my wep password just for kicks, but I keep running into the same error. When I try to use airplay-ng for the packet injection, it always gives me the error " wlan0 is on channel -1, but the AP uses channel 6". I've tried setting wlan0 to channel 6 manually, but that doesn't help. I spent a while searching for a solution, but it seemed like each page had a different, usually highly complex solution, that still doesn't work. I have the most recent drivers for my wireless card, and it meets all the requirements. So, is there any solution to this that will actually work?
View 9 Replies
View Related
Jul 14, 2011
Thinking about building a new system, with 4GB of DDR3 RAM. I am just wondering, which would you prefer: Dual-channel DDR3 or Quad-channel DDR3? Does one have better speed performance over another? Will one way keep your system cooler?
View 2 Replies
View Related
Aug 12, 2010
Am attempting to set a static IP address on a server (to be used with Mythtv) and is running mythbuntu 10.04 (apologies if this is the wrong place to post this). I can set a static IP address that is in the range of 192.168.1.x on other machines on the network but when I try with the server it is not able to connect to the network. When using the DHCP rather than manually assigning the address it is assigned an address with the 10.0.0.x range. Why is it doing this I have never have this problem on other ubuntu boxes (and this one prior to a format of the OS).
The router/gateway is 192.168.1.1 I did have a DHCP server on the mythbox before formatting it and I was able to assign a static 192.168 address and retain internet connectivity. But I have re-enabled the DHCP server on my router since formatting the box.
View 1 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
Aug 3, 2010
I am currently investigating channel bonding for rhel5.5.Is there any way I can create one bond from nics on two different linux machines.They will be a cluster without any clustering software like beowulf or LVS.There will be a cluster interconnect through which they can communicate.Should I tweak the bonding module??
View 3 Replies
View Related
Feb 10, 2011
A single LUN is attached to my server with rhel5.3. The server has two Fibre channel adapters. I need to turn off one of the FC interface manuly. Which command should i use to turnoff(disable) the adapter. The settinga are the following:
#multipath -ll
test-lun (36005076801900139b800000000000150) dm-14 IBM,2145
[size=10G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=100][enabled]
\_ 2:0:11:3 sdc 8:32 [active][ready]
\_ 4:0:13:3 sdi 8:128 [active][ready]
\_ round-robin 0 [prio=20][enabled]
\_ 2:0:12:3 sde 8:64 [active][ready]
\_ 4:0:12:3 sdg 8:96 [active][ready]
[Code]......
View 2 Replies
View Related
Jul 10, 2011
I tried to decipher the info on the opensuse site about networked scanners but it's not clear to me and I don't see anything in the forum here that addresses the question, so here goes. My PC is an opensuse 11.3 box. My Epson CX9400 is attached to a Windows 7 PC at the other end of the house.
The PC's can talk and can access shared files nicely. It will print perfectly from the Windows box or the Linux box. It will scan perfectly from the Windows box. BUT I cannot scan documents from the Linux box. Have installed XSane and Image! Scan for Linux and neither one seem to find the scanner. I tried adding it manually in YaST and it doesn't seem to find it either.
View 11 Replies
View Related
Nov 26, 2010
I need AV for Linux to scan windows clients.
I search over internet but not found something like that
Did anyone know something like this?
View 3 Replies
View Related
Jun 13, 2011
I recently installed Ubuntu 10.04.2 Server on a small desktop to use as a print server. During installation I marked the sSH, Print, and Samba services.I can ssh into it just fine and that's how I'm configuring it. I have a hp Deskjet F2210 connected to it.My end goal is to be able to use the scanner from my *buntu desktop and from a desktop running XP. All of these being connected via ethernet router.
View 9 Replies
View Related
Dec 21, 2010
I am having sendmail server on RHEL 5. i want to scan emails. best Antivirus to scan emails.
View 3 Replies
View Related
Apr 20, 2010
I am newbie to postfix. I added a new domain to my postfix server in the main.cf under mydestinations variable and the relay_domains file. Also, added this domain to my backend exchange server. When I send a test message from the new domain, my messages from that domain appear to be stuck in the "queue active". What does it mean when you are stuck in this queue? Does this mean that my backend email server (exchange 2003) isn't allowing messages from this new domain OR that the POSTFIX server still needs configuring.
View 2 Replies
View Related
Feb 11, 2010
Is there a free online vulnerability scanner where either I can give them the IP address to scan or can be initiated from the console command, tool, or text based browser. I use GRC's Shields Up when I have a GUI, but I want a scan ran on my website that runs Ubuntu 8.04 server on a hosted VPS.
View 5 Replies
View Related
May 25, 2011
We have three Asterisk servers, one in a co-location and one at each of two offices. IAX2 trunks are set up between the three boxes.Incoming calls are answered at the colo box, then passed to whichever office box is required using a Dial command in the dialplan, eg:
Dial(IAX2/stafford/9132,60)My understanding is that the colo Asterisk box should be able to transfer the call to the office box, so that the call path changes from:
IAX Provider -> Colo -> Office
to
IAX Provider -> Office
[code]....
View 1 Replies
View Related
Feb 27, 2011
I have a Cent OS dedicated server, not sure what version though as I'm new to Linux. How do I find out what version I have? Is there an anti virus or security package that I can install on my server which can use Cron Jobs to do a scan every 12 hours.
View 7 Replies
View Related
Jun 17, 2011
I've got a bog standard install of 10.04 LTS running as a mail server. An update has stalled on a "Configuring grub-pc" screen, the forward button does not move me forward? How can I resolve this situation? Seems like a bug in the update process?
View 1 Replies
View Related
Jul 16, 2011
I have a dedicated server which I run on him only one website which has about 11k-15k unique visitors per day.
The httpd processes stuck it almost everyday and I can't understand why... I fix it via "killall -9 httpd" and then "service httpd start". code...
View 2 Replies
View Related
Jul 19, 2011
I am literally quite stuck with proftp the version being: ProFTPD Version 1.3.3e# I have the following config:
[Code]...
I mean would I need to logically seperate out a series of passive ports and then open them using my custom routers NAT, so each passive port goes to its own virtual host as such? Just a bit confused about what the next steps would entail I mean I don't have any firewall on my Linux box, don't see the point since I use pfSense and an IPS/IDS and it's never been hacked since!
View 2 Replies
View Related
Dec 14, 2010
I am writing a client chat server program in java. The chat server is already written. I created the interface and I connected to the chat server. The server keeps sending protocol messages to whom ever is connected, also it keeps sending specific protocol every 10 sec to check if user is still online.My problem is when I connect from my interface to the chat server, the program gets stuck, I can not press any other button because after connection my program keeps receiving commands from server(I have a method to keep reading after connection). How can I keep track of messages sent from server and not get stuck i.e press other buttons or type in the interface?
View 2 Replies
View Related
Feb 2, 2011
I just downloaded the server version for v10.10 (ubuntu-10.10-server-i386) and when I start the installation, the installation gets stuck on ISOLINUX 4.01 debian-20100714 ETCD Copyright (C) 1994-2010 H. Peter Anvin et al Loading bootlogo... and it stays there. The computer is a laptop: DeskNote 512M memory. Gentoo distro works ok on this PC.
View 1 Replies
View Related
Oct 28, 2010
It happens really randomly. Suddenly keyboard and mouse stop to react. Screen freezes. However if I have for instance skype running during that "crash", I can still continue to talk over internet. For me looks like x serwer crash. Xorg logs however are empty. I had to hard reboot only to get control over pc (magic sys key + SUB) only works. Trying switch to another session is not working. I run Slackware 13.1. Kindly asking to help me to solve that irritating issue. I pasted errors usually I find at Xorg.0.log.old after hard reboot only
Code:
2.6.35.4 #2 SMP Tue Sep 14 19:33:55 CEST 2010 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 8800 GT/PCI/SSE2
OpenGL version string: 3.2.0 NVIDIA 195.36.15
OpenGL shading language version string: 1.50 NVIDIA via Cg compiler
[Code]...
View 1 Replies
View Related
Sep 16, 2010
I have recently been running into the "EQ overflowing" message. It has been happening when I open an image with gimp or a xls with open office. I noticed some were having this issue with earlier kernels. I am using the nouveau driver to run two nvidia cards with three monitors. I am currently running the 2.6.34.6-54.fc13.x86_64 kernel. Here is the output of my Xorg.0.log file:
[Code]...
View 1 Replies
View Related
Apr 1, 2010
I have a problem with a simple client/server socket program. the connection is done through 2 connections a udp connection and a tcp connection. the flow is that the client sends a udp packet to the server and the server returns it through a tcp connection. this is done in a loop. my code works fine on an ubuntu server, when I try to use it on redhat it sometimes get stuck. the server is stuck on recvfrom and the client waits on the recv. if i add a delay in the server or run the client through strace everything works fine.
[code]...
View 3 Replies
View Related
Sep 2, 2010
Messages are stuck in my server's /var/spool/mqueue/ folder beyond the lifetime I have specified in confTO_QUEUERETURN (5d). Any idea why this could be? The file permissions appear fine; files in the mqueue folder show rights of: Code:-rw------- 1 root smmspThis is causing an issue because the queues are slowly getting larger and larger. I'm seeing the queue size consistently growing. maillog shows entries like: Code:grew WorkList for /var/spool/mqueue to 28000Just thinking outloud -- could the queue runner not be completing it's job in time? Maybe I could check with time sendmail -q
View 1 Replies
View Related
Aug 5, 2010
I recently install CentOS 5.5 on my small server. Unfortunately, I have problems with my mail configuration. I don't know anything about sendmail and dns configuration so I am just looking for something easy to set up. I use cron to perform automatic task. I set up the variable $MAILTO in cron to my regular mail. Cron send the mail but it is stuck in the queue.
View 11 Replies
View Related
Jan 11, 2011
How can I change the "Scan this dir for additional .ini files", as it is no showing up when I run "php -i"Scan this dir for additional .ini files => (none)I on SUSE 11PHP was installed using RPM packages,
View 3 Replies
View Related
