Server :: Asterisk IAX2 Channel "unable To Transfer"?
May 25, 2011
We have three Asterisk servers, one in a co-location and one at each of two offices. IAX2 trunks are set up between the three boxes.Incoming calls are answered at the colo box, then passed to whichever office box is required using a Dial command in the dialplan, eg:
Dial(IAX2/stafford/9132,60)My understanding is that the colo Asterisk box should be able to transfer the call to the office box, so that the call path changes from:
IAX Provider -> Colo -> Office
to
IAX Provider -> Office
[code]....
View 1 Replies
ADVERTISEMENT
Sep 13, 2009
I compiled and installed the Asterisk ztdummy package because there is no rpm for it, unfortunately, and i even reinstalled asterisk, but i still get the "No application 'Meetme' for extension..." error when trying to conference. I do a "module show", and it lists other modules that were compiled with the zt source, but not ztdummy.Does anyone know how to fix this? This is more than a passing interest or hobby, because i need to conference about 3 to 5 people to help me test a new Website Content Management System and User Forums Management System i am about to launch as a service.
View 3 Replies
View Related
Aug 16, 2009
When trying to transfer files from my server to my desktop, the files never get fully transfered. I have windows cmd running a ping to my server, and all is fine until i try to transfer files. Some will transfer fine, and then out of nowhere the server will stop replying. I then have to restart the server to gain access to it. A 2 GB file will transfer about halfway, and then the server will not be able to be pinged. I have static IP on the server and my desktop. Running XP x64 and Ubuntu server 32-bit 9.04. Tried using Samba and NFS Exports. I have both my desktop and server connected to the same gigabit switch, and then my switch connected to my router.
View 14 Replies
View Related
Jan 18, 2009
I want to install Asterisk gui using svn command, but I have the following error:
# svn co http://svn.digium.com/svn/asterisk-gui/trunk asterisk-gui
svn: PROPFIND request failed on '/svn/asterisk-gui/trunk'
svn: PROPFIND of '/svn/asterisk-gui/trunk': Could not resolve hostname `svn.digium.com': Temporary failure in name resolution (http://svn.digium.com)
View 5 Replies
View Related
Jun 1, 2010
I have been reading about asterisk, I did some basic configuration, a small ivr, record messages.. but I was wondering how and what/where should I modify to use a database to save sip users and voicemail user..then we can add user/voicemail with php-myadmin I always search but I cant find about this configuration..
View 1 Replies
View Related
Jan 13, 2011
My asterisk version is 1.6 and Web-MeetMe is 4.0.2 I get the following upon issuing "make" in web-meetme/cbmysql/ :
Quote:
cc -pipe -I/usr/include/mysql -L/usr/lib/mysql -fPIC -I/usr/src/asterisk -D_GNU_SOURCE -I/usr/include/mysql -c -o app_cbmysql.o app_cbmysql.c
app_cbmysql.c:14:22: error: asterisk.h: No such file or directory
app_cbmysql.c:25:33: error: asterisk/autoconfig.h: No such file or directory
app_cbmysql.c:26:27: error: asterisk/lock.h: No such file or directory
[Code]....
View 2 Replies
View Related
Jun 25, 2011
PC seems to run fine in single channel mode but monitor reports no input in dual channel mode and memtest86+ lists from 1-3 errors per pass in single channel mode. Motherboard (Gigabyte P43T-ES3G) can't be set for the 1.65 volts required by the RAM (2x2 of OCZ3P1333LV4GK PC3 10666). The mobo voltage choices are 1.6 or 1.7 volts. I have tried both and increased the MCH voltage from 1.1 v to 1.2 v, but so far can't get it to run in dual channel mode at all and single channel mode seems to run fine but I still get errors in memtest86+. Also tried optimized Bios settings and loosened memory timings (from 7-7-7-16 to 8-8-8-27 and tRFC 60 to 70) and reset Command Rate from 0 to 2. CPU is Core 2 Quad @ 2.4 Ghz, PSU is rated at 400 watts, Video card is Gigabyte GT220.
View 2 Replies
View Related
Jun 6, 2010
I have fedora 13, and installed asterisk.. Before I had centos and have my asterisk running to test and learn.. but in fedora I see there is a http miniserver for admin asterisk..
I edited enable, port and ip in the file http.con but when I try [url] I got 404 page no found Asterisk server...
View 2 Replies
View Related
Jun 29, 2011
I'm trying to crack my wep password just for kicks, but I keep running into the same error. When I try to use airplay-ng for the packet injection, it always gives me the error " wlan0 is on channel -1, but the AP uses channel 6". I've tried setting wlan0 to channel 6 manually, but that doesn't help. I spent a while searching for a solution, but it seemed like each page had a different, usually highly complex solution, that still doesn't work. I have the most recent drivers for my wireless card, and it meets all the requirements. So, is there any solution to this that will actually work?
View 9 Replies
View Related
Feb 16, 2010
I installed an Asus P7P55D PRO motherboard and now I can't mute Master channel with alsamixer, even not using KDE mixer. Probably ALSA doesn't support properly, despite I upgraded alsa libraries (alsa-lib-1.0.21a). The key to increase or decrease the volume through keyboard works fine, but the key for mute is not working. These are the alsamixer values:
Card: HDA Intel
Chip: VIA ID 444
I also used alsaconf command and it detects a snd-hda-intel board. I have a G15 keyboard and I even tried to make a shortcut with KDE mixer, but it doesn't work. Is there any way to solve it or have I to wait for a new version of alsa? I use Slackware64 13.0 with kernel 2.6.32.7.
View 8 Replies
View Related
Nov 13, 2010
I need to custom my dialplan at Linksys Pap2-NA to fit my asterisk server as i have three destinations.
Localy : xxxx
International: 00.
Services: *666x
View 2 Replies
View Related
Jul 14, 2011
Thinking about building a new system, with 4GB of DDR3 RAM. I am just wondering, which would you prefer: Dual-channel DDR3 or Quad-channel DDR3? Does one have better speed performance over another? Will one way keep your system cooler?
View 2 Replies
View Related
Feb 26, 2011
I just setup a new LAMP server (CentOS 5.5 x86_64) box with channel bonding on NetXtreme II BCM5709 Gigabit Ethernet (IBM x3650 M3). The problem is I wasn't able to connect to this server when I'm in different VLAN's. This server also unable to ping different VLAN's. But everything works fine when I transact in the same VLAN.Here's the config:
Datacenter VLAN = 9
Firewall = Disabled
SELinux = Disabled
[code]...
View 10 Replies
View Related
Mar 20, 2010
I know that my tuner is working as i can watch tv in xawtv.
The hardware I'm working with:
P4 2.8GHZ
512MB Ram
Hauppauge 44981
I have added the card as both V4L and MPEG4 (I'm unsure which I'm supposed to use).
I setup the source to have "no grabber", and then set up input, when I do this, for V4L, there is no "Scan for Channels" option, when i set up input for MPEG4, there is that option, but when I click it i get an error, "Failed to open the card", but I can change the input on that page to the V4L input, i hit scan for channels, it scans and adds channels up to channel 22, where I get "No Lock"; it doesn't seem to do anything else from there.
So, how should I be using this card, and how can I know when its working with mythtv?>
View 4 Replies
View Related
Aug 3, 2010
I am currently investigating channel bonding for rhel5.5.Is there any way I can create one bond from nics on two different linux machines.They will be a cluster without any clustering software like beowulf or LVS.There will be a cluster interconnect through which they can communicate.Should I tweak the bonding module??
View 3 Replies
View Related
Feb 10, 2011
A single LUN is attached to my server with rhel5.3. The server has two Fibre channel adapters. I need to turn off one of the FC interface manuly. Which command should i use to turnoff(disable) the adapter. The settinga are the following:
#multipath -ll
test-lun (36005076801900139b800000000000150) dm-14 IBM,2145
[size=10G][features=1 queue_if_no_path][hwhandler=0][rw]
\_ round-robin 0 [prio=100][enabled]
\_ 2:0:11:3 sdc 8:32 [active][ready]
\_ 4:0:13:3 sdi 8:128 [active][ready]
\_ round-robin 0 [prio=20][enabled]
\_ 2:0:12:3 sde 8:64 [active][ready]
\_ 4:0:12:3 sdg 8:96 [active][ready]
[Code]......
View 2 Replies
View Related
Apr 29, 2010
why I got "Could not reload FOP Server" on Asterisk?
View 2 Replies
View Related
Jul 7, 2011
I'm trying out the latest Ubuntu and I'm having trouble transferring my bookmarks from my old hard drive. I saved the HTML file , but when I go to import the bookmarks to the new hard drive I don't see an option to import the bookmarks when I launch firefox and open the bookmarks tab. My bookmarks tab doesn't have a manage bookmarks option. can someone tell me how to transfer them ?
View 4 Replies
View Related
Dec 7, 2009
I am unable to transfer file using rsync. I have installed rsync and ssh package.. When I try to transfer file , its giving an error rsync -v -e ssh a usw3tvx@lalqau40:ssh:lalqau40: Name or service not knownrsync: connection unexpectedly closed (0 bytes received so far) [sender]rsync error: error in rsync protocol data stream (code 12) at io.c(463) [sender=2.6.8]I tried with simple format... nothing works...Even I couldnt ssh with hostname. However I can connect with Ip address... I
View 1 Replies
View Related
Aug 1, 2011
I have configured openssh 5.8p2 with centos 5.6. My sftp is working fine with chroot environment but i am having problem with SCP. I am dealing with muliti Redhat servers. When i try to transfer data from other linux server through scp it gives connection refused. For e.g ssh 5.8 is configured on new server and i want to transfer files from old server which is using openssh 4.3 version.i created same username and password on new server as on old server.My sftp users on new server has no shell access but only sftp access. When i try to scp from old server to new server it gives error connection refused. Is the below configuration only for sftp and can't scp? According to google the configurations i found are for scp and sftp. Do i need to generate ssh keys by giving users on new server shell access, once created then stop shell access again, as i dont want to give shell access permanent for security reasons? but i want to use ssh keys for more security as well.
Port 22
PermitRootLogin no
1.override default of no subsystems[code].....
View 5 Replies
View Related
Aug 27, 2011
I have 2 computers on the same network that i need to link together to transfer files 1 is a web server the other is a minecraft server. the problem is that the file transfer will be constant as the minecraft server will constantly updates files on the web server and I dont want it to go to the router then to come back to the web server. I want to add a second network card to each computer and link them together and use this second connection to transfer the files is it possible?
View 2 Replies
View Related
Aug 10, 2010
I run a webserver with centos 5 and like to change hardware. I run a 1u supermicro 6014t server with 4 *500gb raid 6 and like to downgrade to a smaler but more efficient server. The problem is this. I'dd like to transfer all the content and the whole OS to the new system, but how do I do that
View 1 Replies
View Related
Jan 1, 2010
Having a bit of a issue with Debian Squeeze and transferring files to the Sony PSP..Hook up PSP to USB port and Debian mounts it..I go to drag a 125 meg mp4 to video folder..Copy windows takes about 10 seconds to transfer it..Exit USB mode and there is no video there. Go back into USB mode and look at video folder on the PSP memory stick and there is no video..It vanished. From another after copy progress closed I right clicked PSP and unmounted it..
It error-ed saying device was busy and could not unmount..Looking at light on PSP i see memory stick is still being written to..i wait for light to stop flashing..About a minute or so..Then am able to unmount it..Go to PSP video and theres the video ready to be watched. Debian isnt accurately showing the copy progress...Its showing complete when it isnt..I have to watch the light on PSP to know when it is truly finished.
View 3 Replies
View Related
Apr 29, 2010
How do I transfer files from one SuSe Linux server to another?
View 4 Replies
View Related
Feb 23, 2010
I have login of two ftp servers and I want to transfer the data from one ftp server to another ftp server. How can I do that, without downloading to local and then upload to other ftp?
View 7 Replies
View Related
May 11, 2011
Iam using public ftp server,the server file transfer rate is very very slow & the server is also very slow,In which way can i check the server to make it fast,can any one give sugession on this.
View 1 Replies
View Related
Jan 20, 2010
using Slackware 13.0, and whenever i trasfer my files to USB, like copy or cut and paste, it will show as if file transfered in an instant,like click paste and poof.the whole 1 gig file transferred in one second, and it wont show dialog box of transfer process, and then i have to predict some minutes and wait (till the transfer actually finishes, i have to usually see my USB's transfer indicator light), if i plug out before or my prediction goes wrong, i end up with corrupted files. This aint related to window manager, as same is case for KDE and XFCE tried thunar, konqueror, midnight commander, all of em resulted with same problem.
View 6 Replies
View Related
Aug 3, 2011
i installed asterisk with yum, the command i used is that yum install asterisk*
Now i want ro remove only asterisk, not its depencies. how i do this?
View 7 Replies
View Related
Oct 9, 2010
Is there any way that I can transfer domain to my home server. The problem is, right now I'm having a mail server some where on the internet, but it is about to due soon. And it is really expensive as well, so I want to setup my homeserver mail server.
View 3 Replies
View Related
Dec 17, 2010
I would like to transfer files from my PC to my account at a sftp server, and I don't know how to do it.
My PC is running with:
User: User1
Address: 10.0.2.3
My sftp account is:
User: SFTPUser1
Address: sftp-server
I can access the sftp server with the command:
Code:
sftp SFTPUser1@sftp-server
The sftp server doesn't answer to ssh requests.
How can I transfer files to the sftp server?
View 7 Replies
View Related
