How can I change the "Scan this dir for additional .ini files", as it is no showing up when I run "php -i"Scan this dir for additional .ini files => (none)I on SUSE 11PHP was installed using RPM packages,
View 3 Replies
I'm using openSUSE 11.2, with some eSATA hard drives. For some reason, they're set to read-only, and I can't change it. I set parameters in fstab as fmask=113,dmask=002,umask=0002,rw Oddly, I was able to delete a file in there, but my samba users have read-only access, and I can't use chown or chmod: I get no error message, but nothing happens.
View 6 Replies View RelatedI need to change from CentOS 4.8 to Redhat Enterprise 5.
1) What is my best option to upgrade and maintain the additional software that I have installed in /opt & /usr/local?
2) Process to reinstall/configure the additional drives during & after the install?
I have a ubuntu server , can advise if I want to change the network setting ( eg. IP address , gateway address etc ) , which one is the configuration file ? for example , if I want to change eth0 setting , what file I should update ?
View 10 Replies View RelatedI know i can use ls comand to list files in folders other than current working directory like this:
Code:
ls /home/user
But where do i add additional option to only list files that end with x?
I just installed Ubuntu 10.04 from the LiveCD--smooth install, OS looks great-elegant.Now, since I have to use dial-up, I need to install additional files from the LiveCD that aren't installed by default:
[LiveCD]:poolmainwwvdial wvdial_1.60.3_i386.deb
...and
[LiveCD]:poolmainwwvstreams [3 sw packages]
How do I get these files from the CD, and make them run on the Ubuntu installation? I've checked in the UI, and see various terms I don't yet understand. Do I extract the packages? Or do I open a pgm in Ubuntu, in which I specify the path to the files on the CD?
I'm going to use an external USRobotics 5637 USB modem that is supposed to work in Linux; just need to configure Ubuntu for this. I have the ISP DNS server numbers and modem is ready. I've seen online info, but I'm stuck at this very basic step.
Im having trouble setting my SAMBA server correctly. I have two Win machines, one with WIN7 and one with XP. I have one Ubuntu machine and Ubuntu Server 10.04. My problem is that I can only acess files from the Win 7 Machine. When I try to map out the shared dirs on my serverI get asked for user and password, when I enter my creditensials it dosent help.. What to do? I used the sample smb.conf file and open for no restrictions..
[Code]....
I have made a Debian minimal installer on a USB drive according to this manual: [URL] I have installed a minimal version of Debian, meaning text-only, with only the kernel, shell, filesystem, and a few programs. Now I need to install the rest of it over the internet. So here are my questions:
1. Where can I find the additional files to install?
2. Where can I find a manual that tells you how to install them? This manual doesn't say anything about that.
3. Are you supposed to install the files during the installation process, or do you get them online through the minimal Debian (using wget, etc.)?
I'm just starting to get a feel for it, and learning about the software. I can't get m4a files to play in Rhythmbox - it says it needs additional plugins, but I don't know where to find them. suggest a link for an m4a decoder plugin, or different software that can play m4a files?
View 3 Replies View RelatedI had a hard time finding out how to change -- get to-- the simple scan preferences. There is no batten on the screen to open preferences window. I found two way to change the preferences on simple scan.
1. Easy way:
I found that when you run a program in gnome an icon of that application appears on top bar. If you click on that icon a window will appear and one of the items on that window is preferences, by clicking on that you could open preferences window, and change your preferences.
2. Hard way:
Go to applications and open dconf Editor
then go to org section click on it
then go to gnome section click on it
then go to Simple-Scan click on it
now you can change things
I understand wget is used to download files. Is there a way I can search a url for what files are available for me to download. I need to install a plug-in from an adobe website.
View 2 Replies View RelatedI know everyone may discard this post because you do not need AV on linux BUT i am trying to use my linux PC as a download horse and would like to scan the files for viruses before I move them to my Windows machine. I downloaded and installed the latest AVG, how do I scan specific files, is it the avgscan command? I check /opt/avg/avg8/log for the scan results of a folder scanned and nothing. I tried avgscan -o -p ~/downloads where -o shows even clean files but after i run the command, there is nothing shown in the prompt and nothing in the log file.
View 4 Replies View RelatedI have a question about zip file.How can I change the name of a folder after the folder is ziped,
Example: I have a 'test' folder, and it includes test1.txt and test2.txt
test/test1.txt
test/test2.txt
[code]...
scan my network and check for files within a LAN, in a mixed Linux and Windows environment.Something like LAN spy for Windows. Is there a package or program like that for Linux?
View 2 Replies View RelatedI had a hack on my oscommerce website recently. I have put in the relevant security patches but I need to check whether the hacker left any code changes in my files. What is a good file comparison software for linux? I need it to scan though the current files and folders and compare it the original default oscommerce installation so I can check the code.
View 14 Replies View RelatedI installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies View RelatedI am using NFS to mount large LUNs from my SAN.I have one already setup and configured. I am adding an additional partition from the same SAN but I am confused on the setup. I know the LUN is connecting to my NFS server correctly because I see it listed in my /proc/scsi/scsi as an additional LUN. What I don't see is the drive being displayed in fdisk -l. I did notice one thing though, when I disable the host mapping from the SAN, my disk information changes from /dev/sdb TO /dev/sdc (see changes below)
Without host mapping to SAN:
Disk /dev/sda: 13999.0 GB, 13999026470912 bytes
255 heads, 63 sectors/track, 1701951 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
How to determine what type of files clamav can scan? For example, if there is no unrar installed it can't scan files in it. So is there any way to find out all types of files that clamav can't scan?
View 2 Replies View RelatedI know that there is little need for me to install an anti-virus etc - but - I was thinking, it is a good idea to scan folders and files that I send to colleagues that run windows.Whats the best way and programme to do this? I guess I simply install an AV programme and thats it!
View 5 Replies View RelatedI have a file which contains the data i retrieved through prstat and an array that contains all the unique process ID's of that particular file. i want to compare each and every line in the file with each and every element of the array so that i can create multiple files for the multiple value in the array.
View 6 Replies View RelatedI use CentOS 5.3 and trying to change limit of max. open files.I added in /etc/security/limits.conf
root soft nofile 50000
root hard nofile 50000
i had 1 server and its hostname is resolving fine.
i purchased 1 vps and its hostname isnt resolving.
for server1 say hostname is server1.domain.com
and for vps i add server2.domain.com
and when i ping my server2.domain.com i get Host Unknown error.
do i add Hostname and make it resolve in VPS.
i want to use hostname like server2.domain.com.
i want both server to have common domain name but diff hostname.
I have configured web server now i want add additional web domain to my web server how can i add it.
View 2 Replies View RelatedI ran a chkrootkit scan and found this: The following suspicious files and directories were found: /usr/lib/pymodules/python2.6/.path /usr/lib/xulrunner-1.9.2.8/.autoreg /usr/lib/firefox 3.6.8/.autoreg /usr/lib/jvm/.java-6-openjdk.jinfo
How do I get rid of this suspicious file?
I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
I've got two files. They both contain package names. Is there any way I can go through the package list on one file, and search to see if each package exists in the other file? What I'd want to do, is if the package name is found in the the main file, then go to the next line. If its not found then print that package name to another file.
I know you can use diff, but it doesn't seem to be that straight forward. As I understand it diff searches line by line, so if line one doesn't match line one in another file, then it prints it out. That's not exactly what I want.
I just really need an easy way to filter out the additional packages that exist on a new server. If I have a list of packages that aren't on the original server, then i can just delete them.
Not sure if I've made any sense but there must be a quicker way to do what i need to. It would take me ages to scan manually through the package names in each list, and highlight the ones i dont need.
For the 1st domain,say domain1. I name the index file as:
[code]...
3 identical files. It works seamlessly. On browser its webpage can be evoked. Now I add another domain, say domain2. How shall I name its index files?
[code]...
I have debian Lenny as an server I would like for monitoring of some network components ( switches, printers, routers ... ) and at
/usr/share/snmp/mibs I have
/usr/share/snmp/mibs# ls -l
total 1844
-rw-r--r-- 1 root root 17455 2008-12-16 18:22 AGENTX-MIB.txt
-rw-r--r-- 1 root root 36576 2008-12-16 18:23 BGP4-MIB.txt
-rw-r--r-- 1 root root 36959 2008-12-16 18:23 BRIDGE-MIB.txt ....
ls -l | wc -l shows 66, what means 66 differen mibs.
snmp related packages I have installed are as :
dpkg -l | grep ii | grep snmp
ii libgsnmp0 0.2.0-2.1 an SNMP library implementation based on glib and gnet
ii libsnmp-base 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) MIBs and documentati
ii libsnmp-perl 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) Perl5 support
ii libsnmp15 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) library
ii snmp 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) applications
ii snmpd 5.4.1~dfsg-12 SNMP (Simple Network Management Protocol) agents
My question is, how I can install additional mibs ( for Cisco, Procurve, etc ) for other hw I could have ? What is procedure. I browsed debian package base and I could not find some more packages related to snmp that could supply more mibs.
I suspect that this has come up numerous times, but I am new to Linux and I am setting up a new in-house server using Ubuntu 9.04 and Apache, etc. I can see the welcoming "It Works!" message when I log in via Firefox. I can see "index.html" when I FTP the server with the site name and password at /var/www. I can also see the -rw-r-r-- attributes, but I can't edit the HTML file or replace it. When I try to rename the "index.html" file.
I get the following message: "Request denied. Verify that the file or folder exists and that you have the necessary permissions on the server to perform the requested operation."
I haven't been able to determine where to enter the password or what changes I need to make to be able to work with the /var/www directory via FTP.
I believe server section is the best when speaking of RAID stuff...
I have the following situation:We have a DELL T3400 with embedded fake raid on it. I dont know exactly how the system was setup (I wasnt here at that time), but the RAID was enabled in bios and while booting, the two harddrives would be seen as members of intel raid volume0 (RAID 1 mirror). I am not sure if the software raid was actually properly configured in Linux (Fedora 9) and if the OS was reconstructing the whole raid or it was just the bios part that was mirroring the /boot or just some parts of it. Frankly I find these hydrid raids very confusing.Some bad disk manipulation from my part caused the server to crash, but I was able to recover and boot just with one hard drive after using fsck.
I decided to get rid of the raid as it's not the right solution for the application we need it for and decided to go for a traditional single harddrive system and to use Ghost for Linux to clone to a spare disk when backups are needed.So I installed the latest Fedora 12 distribution onto another harddrive and disabled RAID in bios (changed from RAID ON to autodetect, which is the only other option).
Here is what I have now:
/dev/sda has the newly installed fedora 12
/dev/sdb is an empty harddrive that I would use as an intermediate
/dev/sdc is the old harddrive member of intel raid volume0
sdb was partitioned into sdb1 sdb2 and sdb3 and I created an ext3 filesystem on sdb2. The hard drive belonging to RAID volume0 (sdc) has a lot of work done on it and I would like to be able to recuperate the files to the new disk (sda). I cannot mount that old harddrive while in fedora 12, as it sees some unknown raid member filesystem on it probably assigned by the intel raid chip.
So I decided to do it from the other side: to boot from raid volume 0, and from there mount a third intermediate harddrive (sdb) onto which I would copy the documents and then mount the same harddrive from the newly installed fedora 12 and copy those documents from that intermediate harddrive.I can mount /dev/sdb2 from fedora 12 fine and copy stuff to and from it, but not when I boot from the RAID volume 0 harddrive (sdc) with fedora 9 on it. It keeps saying that the partition in question (/dev/sdb2) is an invalid block device.I am stuck here, as my knowledge in this sort of things is very limited.If somebody can indicate me how to recuperate files from that old raid harddrive onto the new fedora 12 drive, I would appreciate a lot.
