Server :: 522 SSL Connection Failed - Session Reuse Required

Jan 21, 2009

I have a problem with vsftpd (latest version available, 2.1.0pre3) SSL. I've configured it to a nonstandard port, 65440, disabled connect_from_port_20 and run it as a normal user, from home directory. I can't use the SSL feature, every time I connect, it only reaches the login process. After logging in, I get the following error (when data transfer would start for LIST command):

522 SSL connection failed; session reuse required
My vsftpd.conf looks like this

Code:
local_enable=NO
write_enable=YES
secure_email_list_enable=YES
email_password_file=/home/stringz/vsftpd/logins

# local_umask=022
dirmessage_enable=NO
vsftpd_log_file=/dev/null
xferlog_file=/dev/null
xferlog_enable=NO

connect_from_port_20=NO
idle_session_timeout=3600
data_connection_timeout=120
run_as_launching_user=YES

anonymous_enable=YES
anon_mkdir_write_enable=YES
anon_other_write_enable=YES
anon_upload_enable=YES
anon_world_readable_only=NO

async_abor_enable=YES
ascii_upload_enable=YES
ascii_download_enable=YES
ftpd_banner=Welcome!

# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# chroot_list_enable=YES
# (default follows)
# chroot_list_file=/etc/vsftpd.chroot_list

ls_recurse_enable=NO
listen=YES
listen_address=<myipaddress>
listen_port=65440
listen_ipv6=NO

pasv_enable=YES
pasv_min_port=65441
pasv_max_port=65480
# chroot_local_user=YES

ssl_enable=YES
allow_anon_ssl=YES
force_local_data_ssl=NO
force_local_logins_ssl=YES
ssl_tlsv1=YES
ssl_sslv2=NO
ssl_sslv3=NO
rsa_cert_file=/home/stringz/vsftpd/vsftpd.pem

The client side is a Total Commander 7.02, there hasn't been any problem with its SSL yet and this only occurs when trying to connect to my vsftpd.

View 8 Replies


ADVERTISEMENT

Software :: Reuse One Ssh Connection In A Shell Script?

Mar 4, 2010

I'm writing a shell script that does multiple scp's and ssh'es to the same host. I would like to know if there is a way to write the script such that in the beginning an ssh connection is established. Then scp transfers files over the already open ssh connection. After which, terminal commands are executed on the host. A final scp transfers files again over the ssh connection. Then the ssh connection is terminated.The whole point is *not* to have:

#!/bin/sh
scp the_file host
ssh host 'execute-some-command.sh'

[code]...

View 8 Replies View Related

Server :: Vsftpd Not Working: Connection Attempt Failed With "ECONNREFUSED - Connection Refused?

Apr 28, 2010

vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".

View 7 Replies View Related

Server :: Share Users Vnc Connection W/ Existing Desktop Session?

Oct 10, 2009

Share users vnc connection w/ existing desktop session?

View 1 Replies View Related

Debian Multimedia :: Connection Failed To Server

Jan 26, 2016

I'm working on getting a Debian box up and running for training labs for Cisco, and would like VNC access to this Debian box. My main laptop is a MacBook Pro, and I have a Windows 10 desktop.What the problem is: Using the MBP's built-in VNC viewer, I receive a "Connection failed to "Server" Make sure Screen Sharing or Remote Management is enabled on the remote computer. using Chicken (of the VNC), I receive a "The server refused the connection".I'm using tightVNC as a server on the debian box. This is a fresh install of Debian.URL...

View 8 Replies View Related

General :: Cannot Get Mail - Connection To Server Failed

Apr 29, 2011

My Phone keeps reporting
Cannot Get Mail
The connection to the server failed
My phone does seem to show (all?) the contents of my home directory so must have received some data but no actual mail.

In debug.txt, this keeps repeating over and over:
Found 0 message changes
Initializing message diff engine
1 messages in state

And in /var/log/maillog, this does:
Killed (lost mailbox lock)
There are no other imap connections running.

View 12 Replies View Related

Server :: Error: Secure Connection Failed

Jan 3, 2010

My server is suddenly getting giving the following error: Quote: Secure Connection Failed An error occurred during a connection to inenergy.dvrdns.org. SSL received a record that exceeded the maximum permissible length. * The page you are trying to view can not be shown because the authenticity of the received data could not be verified. * Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site. I had been trying to configure the server to do secure logins (before Christmas) , but I don't think I had completed the configuration and I'm not sure how to reset it so that I can start again.

View 1 Replies View Related

Programming :: Reuse Socket Fails "Address Already In Use" Or "Connection Refused"?

May 14, 2010

Problem: can't restart programs which use socket to communicate.

Symptom: Restart Listener dies "Address already in use".
Restart Caller dies "connection refused"
System: Ubuntu 10 (and 9)

[code]...

View 3 Replies View Related

Debian :: Server IP - Remote Desktop Connection Failed

Jun 14, 2011

I want to connect to my Linux debian server, via Remote desktop connection, but when I give IP of my server and click connect, it fail, it says can't connect to the remote computer and below 3 reason.

View 3 Replies View Related

OpenSUSE :: Error: Connection To Server Failed - (version 11.0)

May 12, 2009

I have just upgraded my openSUSE installation from 11.0 to 11.1 which everything is working great. Kudos to the development team and all those involved! I really like 11.1. One problem I have encountered is I cannot get clusterssh working. It appears to install just fine but whenever I try to execute like I did in 11.0 I get the following error: Connection to server failed -- (version 11.0) No protocol specified at /usr/local/bin/cssh line 1883

I tried to find a version for 11.1, rpm version that is, but no luck. I even download the source from SourceForge and still nada, same error. Not sure what is going on and looking for some assistance cause I really need clusterssh or another means to connect to several other machines to conduct changes.

View 9 Replies View Related

Server :: Rndc - Connect Failed - 127.0.0.1#953 - Connection Refused

Apr 27, 2009

Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :

The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)

WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes

NDC command failed : rndc: connect failed: 127.0.0.1#953: connection refused

But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.

Server details :

Red Hat 4.1.1-1

View 15 Replies View Related

CentOS 5 :: Outlook Express - Connection To Server Has Failed

Jul 30, 2010

I have set up a mail server and SASL and have it all working. I can send and receive mail though squirrel mail, receive from outlook, but cannot send from outlook. I am using this guide [URL]. I was even able to authenticate perfectly fine like they do be telneting to the server from root as they did. (Step 5). Now a little later in that step when they hook it up to outlook express is the problem. That doesn't work for me.

I get this error in outlook
The connection to the server has failed.
Subject 'test'
Server: 'mail.myserver.com'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure(SSL): No
Socket Error: 10060

View 3 Replies View Related

Fedora Networking :: Pptp Vpn Connection - Failed To Parse Server Response

Nov 11, 2009

I am trying to connect to our work server (windows), however, without succes In the log I get the message: "Failed to parse server response"

And when I close the vpn connection window I get "there were no valid vpn secrets"

I Use F10 with xfce on an aspire one.

View 2 Replies View Related

Ubuntu :: Failed To Connect Firefox Can't Establish A Connection To The Server At Localhost

Feb 3, 2010

I installed required updates on my linux installation (ubuntu 9.4) I am now unable to access my localhost, and get the following message from my browser: Failed to Connect Firefox can't establish a connection to the server at localhost. Though the site seems valid, the browser was unable to establish a connection. I checked my hosts file which has the following information:

[Code]....

View 6 Replies View Related

Ubuntu :: Boot Selection Failed - Required Device Inaccessible

Jun 20, 2010

I have a Ubuntu - windows 7 dual boot (in two partitions of the same HDD) desktop PC for a few months. I was learning terminal commands and, although I don't think I made such a big mistake, but the fact is that the a very strange thing happenned: "Preferences" and "Administration" from System disappeared as it did also "Applications". After rebooting the same it remained the same. No big deal, I thought, because I haven't yet saved any important work on Ubuntu. So I reinstalled Ubuntu. Done that everything was nice until I booted Windows... Since then I counldn't start windows after GRUB due to:

Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible."

Windows Live DVD Repair is useless. I've tried CHKDSK utilities, no result. Windows partition in Ubuntu's Disk Utility is OK but I can't access the files (all "broken links"), just can explore a few directories after which I find myself entering the same folder endlessly. I wanted to repair windows boot or at least recover some important files in Documents and I thought I had backup (but turns out that, for some reason that I'm still trying to understand, they aren't...).

View 2 Replies View Related

Server :: Amanda - Selfcheck Request Failed: Recv Error: Connection Reset By Peer

Feb 22, 2011

when i ran amcheck DailySet1 as backup user and got these messages:

[Code]....

View 3 Replies View Related

Ubuntu One :: Music Store Bug - Internet Connection Required

Jun 22, 2010

I just started using the Ubuntu One Music Store from within Rhythmbox and all was going well until I tried to play a music video. (Search for Daft Punk. Scroll to Videos. Click 'Around the World' and attempt to play.)

Then I got a stupid error message saying:
"Internet connection is required to access the music store. Please connect and reload."

I could not get rid of this error message by restarting Rhythmbox. I had to unload the Ubuntu One Music Store plugin, and then restart Rhythmbox.

View 2 Replies View Related

Fedora :: Error - Connection.py:630:call_blocking:TypeError: A Float Is Required

Jun 26, 2011

When ever I try to run system-config-samba after the recent update I get the error:

connection.py:630:call_blocking:TypeError: a float is required

View 4 Replies View Related

OpenSUSE Network :: Make A Adsl Connection,but One Package Required?

Mar 25, 2011

I downloaded openSUSE-11.4-KDE-LiveCD-i686.iso from software.opensuse.org: Download openSUSE 11.4 yesterday.It's a liveCD,not a DVD. Then I used a dd command to make a live USB by the instruction from this page:SDB:Live USB Then I shut down the computer,and boot from the usb. I went to the yast--DSL to make a new adsl connection.But after I configured everything,yast told me one package needed.The package's name is "linux-atm-lib". I haven't connected to internet.How could I do to install a package and make a connection?

Now I am downloading a DVD.Does a DVD include the package called "linux-atm-lib"?

View 2 Replies View Related

Server :: Minimum Partition Size Required In Redhat Linux Server For DNS Server Configuration?

May 5, 2011

Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?

i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB

if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..

View 3 Replies View Related

Red Hat / Fedora :: Getting Error Message 'session X' Failed

Mar 28, 2011

My fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.

[code]...

View 1 Replies View Related

OpenSUSE Hardware :: Setup Multipath With Failover Policy On 11 - Connection Failed Over To Second HBA Connection To SAN

Aug 13, 2009

I am trying to setup multipath with failover policy on openSuSE 11. I have two qla2xxx HBA's installed and they appear to be working. Here is the output of "multipath -l" command

[Code]....

While testing, I pulled one of the two connection to SAN, and the connection failed over to second HBA connection to SAN. When I plug the cable back in, it does not fall back to original connection... It stays in failed state. Also, I noticed that failed disk (sdd disk) comes back as (sdg disk), which is probably why connection does not fall back to original HBA. But, when I run "/sbin/service multipathd restart" sdg disk shows as as enabled in multipath -l...

View 9 Replies View Related

Ubuntu Multimedia :: PulseAudio Volume Control - Connection Failed:Connection Refused

Jul 4, 2010

I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.

I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.

[Code]....

View 9 Replies View Related

Hardware :: Error - Saving Connection Failed 0 Can't Write Connection Type 'cdma'

May 21, 2011

I got an error while working with NetworkManager in new RHEL6/ Fedora14. I have a ZTE AC 2726 3G wireless modem. i had tried to connect it via NetworkManager . It only requires username and password to connect but the thing is that after putting all the credentials i had checked the option" available to all the user "and while i was trying to save the profile it shows the following error saving connection failed 0 can't write connection type 'cdma'I had google so many times around this error but no better solution is there .

View 1 Replies View Related

Ubuntu :: Failed To Shutdown LIVE CD Session / Resolve This?

Nov 3, 2010

I tested 10.10 LIVE CD Gnome version.

I did some disk operations on NTFS and FAT volumes.
It worked well.
When I wanted to shutdown from the right upper corner icon,
I got a black screen saying:
(process:272) GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)

it does not take any keyboard, incl cont+alt+del

may it be a bug?

View 2 Replies View Related

Debian :: Gedit Error - Failed To Connect To The Session Manager

Feb 15, 2011

Whenever i start gedit from command line, i always get this: (gedit:2685): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported

View 3 Replies View Related

OpenSUSE :: Failed To Open A Session For The Virtual Machine Windows XP?

Sep 14, 2010

I have installed virtualbox on opensuse 11.2 64bit.

When I go to open a machine it says

"Failed to open a session for the virtual machine Windows XP. The virtual machine 'Windows XP' has terminated unexpectedly during startup with exit code 1."

"
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
Machine
Interface:

[Code].....

as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary."

View 9 Replies View Related

Ubuntu :: Nxserver 596 Session Startup Failed - No Such File Or Directory

May 6, 2011

im unable to connect via nxclient to my remote desktop when i try i get this in the log

Code:

Can't open /var/lib/nxserver/db/running/sessionId{F83992670669DE66AABE321BB44AD3E5}: No such file or directory. mv: cannot stat `/var/lib/nxserver/db/running/sessionId{F83992670669DE66AABE321BB44AD3E5}': No such file or directory the hard drive is not full and i have tried restarting nxserver through putty + hard boot

View 1 Replies View Related

Ubuntu :: Nautilus Won't Start Without 'sudo' - Failed To Get Current CK Session

May 21, 2011

Running natty (latest upgrade), and i'm having nautilus issues. If i type

Code:
nautilus
into the terminal, i get nothing. no errors, no text, and no window.

If i type

[code]....

View 7 Replies View Related

Applications :: VirtualBox - Failed To Open A Session For The Virtual Machine

Apr 8, 2010

I'am using gentoo linux. After some system's updates VirtualBox stoped loading any virtual machine with error:

Code: Failed to open a session for the virtual machine. Virtual machine has terminated unexpectedly during startup.

Details:
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Machine
Interface: IMachine {99404f50-dd10-40d3-889b-dd2f79f1e95e} Kernel log

Code:

So, i've rebuilded all VirtualBox dependencies with safe flags, then i've recompiled most of the sys-* packages also with safe flags. However VirtualBox still doesn't work.

UPD: virtualbox-bin-3.1.4

UPD2: 3.1.6 and ose-versions crashes with same errors

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved