I installed required updates on my linux installation (ubuntu 9.4) I am now unable to access my localhost, and get the following message from my browser: Failed to Connect Firefox can't establish a connection to the server at localhost. Though the site seems valid, the browser was unable to establish a connection. I checked my hosts file which has the following information:
[Code]....
I've installed apache application server v7.I get a problem when I type the command localhost:8080
Unable to connect Firefox can't establish a connection to the server at localhost.
# ps ax |grep tomcat
9463 pts/2 S+ 0:00 grep tomcat
t "Failed to Connect Firefox can't establish a connection to the server at127.0.0.1:3580." when I try to open a Help File of one of the applications I have.My /etc/hosts file has its entries right:127.0.0.1 hostname.hostdomain hostnameMy firewall is also disabled.
nmap -sT -O localhost
gives me (I have included some):
2401/tcp open cvspserver
[code]....
I have a strange problem where I can connect to any site except for [URL]... with the latest Firefox and Google chrome both can connect to [URL]... Using Ubuntu 10 not 7.10 FireFox: Unable to connect Firefox can't establish a connection to the server at [URL]...
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Google Chrome: This webpage is not available. The webpage at [URL].. might be temporarily down or it may have moved permanently to a new web address. More information on this error Below is the original error message Error 2 (net::ERR_FAILED): Unknown error. Really Strange is that every other site is fine?
I have just installed Google Desktop. When I do a search it says: Unable to connect Firefox can't establish a connection to the server at 127.0.0.1:38552.
View 3 Replies View RelatedI am trying to install tomcat (apache-tomcat-6.0.24) on a Redhat machine.Post installation, I find the url: working fine untill I click on 'Tomcat Manager' where it gives me the following message: Failed to Connect.Firefox can't establish a connection to the server at localhost:8080.Though the site seems valid, the browser was unable to establish a connection.
* Could the site be temporarily unavailable? Try again later.
* Are you unable to browse other sites? Check the computer's network connection.
* Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
Since a few days ago, I have too much problems to connect.When I try to connect to Internet with Firefox, the following message is printed out (, most of the times):Code:Unable to connect Firefox can't establish a connection to the server at URL...
View 9 Replies View RelatedI have some confusion about mysqladmin and mysql.I am using mysql version Quote:
[root@localhost freepbx-2.7.0]# mysql --version
mysql Ver 14.12 Distrib 5.0.77, for redhat-linux-gnu (i686) using readline 5.1
My MySQL is running
Quote:
[root@localhost freepbx-2.7.0]# /etc/init.d/mysqld status
mysqld (pid 11440) is running...
[Code]...
Dual boot Vista Basic and Ubuntu 10.04 on low spec PC. I can connect to the wireless when I am next to it. I move to the room where the computer is normally used and I lose connection. I can still see it but it fails to establish a connection. Okay, sounds like it's just too far way but when I re-boot and use Vista, it works fine (1 or 2 bars, but it works). Is this a driver issue? Anything I can do apart from move my wireless router?
View 9 Replies View RelatedIm having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :
The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)
WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes
NDC command failed : rndc: connect failed: 127.0.0.1#953: connection refused
But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.
Server details :
Red Hat 4.1.1-1
I am trying to establish an ssh connection to my server. I have a regular ssh connection working through the command line, so I know my key works and I have the port forwarding on the router correct.
When I go to Places -> Connect to Server the window comes up properly. The only problem is that the drop down menu only has one option in it for Service Type. It is Custom Location. I have had this set up in the past and there were other options there. I chose the ssh connection and everything was fine. Now it doesn't work.
I have tried to completely uninstall nautilus and reinstall it, but that didn't work. When I did uninstall it, I uninstalled gnome-session as well, and I reinstalled that one too.
After spending what seems like an eternity trying to learn how to host a couple of webpages on my laptop for no better reason than to practice creating them without paying for a server. .for the time being, I kept getting the usual errors (stuff I have seen lots of tutorials on) and this time kept getting
"The connection was refused when attempting to contact localhost"
Just by random chance I happened to open up Chromium for one of my attempts and low and behold, I get the much awaited
Quote:
It works! This is the default web page for this server.The web server software is running but no content has been added, yet. I can even login to phpMyAdmin from Chromium. So what's going on with Firefox? Doesn't work in Seamonkey either. Using 10.04
Working in CentOS. Want to have drag-and-drop SCP access to another system.
Opened up the file manager (nautilus) and went under File -> "Connect to Server". Filed in the information, hit connect. The connection will sit forever and will never properly establish. It creates an icon on my desktop, but noting else.
If I go into terminal, su to root, open nautilus and then repeat the process as a root user, then it works successfully. Connection established after I trust the remote host. File transfer works fine.
what is occurring when I attempt to connect as my normal user?
when sending a message some recipients get it while others don't and i receive this mail every time an e-mail has failed to be received by others:
[Code]...
I am trying to deploy Kerberos and LDAP so users will be able to login in to a server on the edge of the LAN, and afterwards be able to establish a SSH connection to all the computers in that LAN without the need to type any passwords, and without the need for me to manage SSH keys [beside the SSH keys on the login server] and local user accounts.
1. When i create the users in OpenLDAP i use a template that i created by reading documentation from the Internet. In the template one piece of information that is neede is the UID. Is there any clever way the keep track of the numbers so i do not assign the same UID to two users, besides using a pen and paper?
2. For the users to be able to establish SSH connections between the computers, the host is going to be added to the keytab like this: ktadd host/client.example.com Is is possible to replace client with something genric so i do not need to mange these keytab files between the hosts?
3. Users will be logging on the the server on the edge of LAN by using SSH keys. How can i configure the setup so the users will recieve a ticket automatically when the logon without executing kinit and without entering a password, just by having a valid SSH key?
4. krb5kdc is running on all the network interfaces in the server i want it to only run on eth1, how can this be done?
I have two machines running Ubuntu 9.1, both with Firefox 3.5 fitted, working well, apart from an error on one machine.When trying to download a Torrent I get the error "Firefox can't establish a connection at the server at localhost: 12322".The other machine is fine without this error.I have searched the Firefox files and this forum, plus a variety of sources but cannot find an answer, apart from "use the other machine".
View 4 Replies View RelatedRunning MYSQL 5.5.12 and MYSQL Workbench 1:5.2.34 on up-to-date Arch linux Set up MYSQL with root account and password. When running Workbench as user, got error when trying to connect :
Quote:
Cannot Connect to Database Server Your connection attempt failed for user 'root' from your host to server at 127.0.0.1:3306: Can't connect to MySQL server on '127.0.0.1' (111)
1 Check that mysql is running on server 127.0.0.1
2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed)
3 Check the root has rights to connect to 127.0.0.1 from your address (mysql rights define what clients can connect to the server and from which machines)
4 Make sure you are both providing a password if needed and using the correct password for 127.0.0.1 connecting from the host address you're connecting from
After commenting #skip-networking in my.cnf error changed to :
Quote:
Cannot Connect to Database Server Your connection attempt failed for user 'root' from your host to server at 127.0.0.1:3306: Lost connection to MySQL server at 'reading initial communication packet', system error: 0
1 Check that mysql is running on server 127.0.0.1
2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed)
3 Check the root has rights to connect to 127.0.0.1 from your address (mysql rights define what clients can connect to the server and from which machines)
4 Make sure you are both providing a password if needed and using the correct password for 127.0.0.1 connecting from the host address you're connecting from
Copying my.cnf to /etc/ and running Workbench as root didn't change anything, i still get the second error The wiki [URl] says to enable MYSQL in /etc/hosts.allow but i didn't do it, i guess it is required only when trying to access MYSQL from remote hosts which i dont.
I have an intel i7 with windows7 64b , then install VMware Workstation and create a machine with Oracle enterprise Linux 64b 5update4, now i want to inatall oracle db10gR2, but this message apears. [oracle@localhost database]$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using 'localhost:0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
[Code]...
iam not able to connect localhost in mysql.i uswd command for mysql is
#mysqladmin -u root -h localhost password "123456"
ErroR:-
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
I used 4 host to establish a high-availability web server system. 2 Load Balancer + 2 Web Server(installed MySQL Server 5.5). 2 MySQL Server used Multi-Master Replication.Used "Amoeba" as MySQL Proxy which direct the write statement to a specific MySQL Server.I can login Amoeba and MySQL Server using MySQL client. I tried query something in XAMMP on Windows XP. It work!
Installed related software:
MySQL-server-5.5.11-1.rhel5
MySQL-shared-compat-5.5.11-1.rhel5
php53-mysql-5.3.3-1.el5_6.1
MySQL-client-5.5.11-1.rhel5
[code]....
What I tried:
yum install php php-mysql
yum install php53 php53-mysql
Compiled php 5.3.6 soruce + MySQL 5.5 Server, Client, Shared, Shared-Compact Above software installed on different host. And the phpinfo showing MySQL I doubt something wrong in my php.ini. Used default php configuration.
php can't connect mysql by 'localhost' but can connect by IP address:
[Code]...
I'm trying to setup PPPoE connection to establish my DSL connection, but I got
Code:
pppoe[3885]: read (asyncReadFromPPP): Session 4479: Input/output error
pppd[4104]: Cannot determine ethernet address for proxy ARP
in my sylog file.
When I do pppoe-start, it connected but I cannot ping into any destination (even to my modem in the same network). DNS servers are explicitly set in pppoe.conf and resolv.conf. Did I miss anything?
Trying to run kismet but get errors on opensuse 11.2 64 bit- error message I get is. Could not connect to Kismet server 'localhost:2501' Question:What do i need to change in the settings, the following are the default ones.
[Code]...
I have installed bind from the repos and am trying to setup a caching name server. After copying the stock name-cachinging.conf to named.conf, I tweaked named.conf to reflect my LAN:
options {
listen-on port 53 { 127.0.0.1; 192.168.1.102; };
listen-on-v6 port 53 { ::1; };
[code]...
i have installed apache and php in my fedora 11 system and httpd works fine except that it doesnt have internet connection for example rapileech doesnt work it says "cannot connect via port 80" and if i put an rss feed collector in a website it doesnt work but everything else works fine , also when i put the same file in a shared web host it works fine
View 3 Replies View RelatedI have been using my laptop as a development machine for a few months now, developing php/mysql applications, and testing them offline via the same laptop by pointing the browser to url.
But a few days ago, my url stopped working and I discovered that it will now only work if I have an active internet connection plugged in. Why has this happened and how to I fix my test server so localhost works with or without an internet connection via an ethernet cable.
I have a strange problem with evolution in Fedora 14. I run my own mail servers (Postfix and Dovecot) on localhost. This all worked great in F13 but now evolution refuses to connect to the localhost imap server. If I connect from my laptop (also F14) i.e. not from the localhost all works fine and great with evolution. I deleted all the config and started again to no avail. I also created a new user and logged in with this user and I still get the same so looks not to be user config issue.
evolution --debug=evo.debug.txt returns nothing useful.
Dovecot is listening on localhost as I can telnet to the imap port. Also other imap clients like Thunderbird work fine.
I am using ubuntu 10.10. I am planning a skype meeting this morning. I have just installed skype 2.1 beta when I tried to sign in I get takes long time and at the end I get p2p connection failed. can there be some other applications that use are using skype port ? if so how can I detect this ?
View 3 Replies View Relatedvsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies View RelatedI've been at this the last 3 hours now or so. I am not a very good with Linux, I am fine with all other areas. I have this laptop, with a Intel Pro 2200BG card. The idea was to install a lxde lightwieght on it and use PCLINUXOS, because its "easy". This computer is for internet browsing and thats it. Under the Network Center -- I can see all networks, including neighbours. When I try to connect to my router via Wireless, I get connection failed over and over.
I then tried doing all the following:
Changing the router from WEP to, WPA, WPA2 personal, WPA2 Enterprise
Changing the SSID, broadcasting to ON, changing the SSID name
I've used various different passwords, and reset the router now about 50 times. I am connecting to my Router (as Ive changed the SSID and noticed it picks up the new name). (Yes I can see the correct MAC addreess). Yes I am on the right channel, all good here.
My Nintendo DS is connecting fine with all the changed settings now. The wireless card worked fine under Windows XP (However I just removed the operating system since I really had no need for it). I've tried every other mode, it works wired. Like I had explained above, I downloaded a what I thought was an easy verison (distro), I was really hoping to get away from the crazy windows life with crazy errors and instability.
I did try enabling display log, and doing it manually by adding a connection, etc. The log tells me about as less would a windows event log: it says
Problems occurred during the network connectivity test
This can be caused by invalid network config or problems w/ your momde / router
Reluanch, etc.
I can connect to the internet fine with wvdial and wvdialconf; heck I am even posting from my PCLinuxOS FM Distro. I want to setup an ethernet connection between two PC's, one running PCLOS 2010.11 FullMonty and the other Knoppix 6.2.0. Knoppix is fine and setting up a connection is simple but with PCLOS I have been having many problems trying to set it up. I tried using the drakconnect tool but it did not work. I tried assigning it a static IP Address but the other PC would still not pick it up and to to it all I keep getting the same error message about problems during the network connectivity test!