Applications :: VirtualBox - Failed To Open A Session For The Virtual Machine
Apr 8, 2010
I'am using gentoo linux. After some system's updates VirtualBox stoped loading any virtual machine with error:
Code: Failed to open a session for the virtual machine. Virtual machine has terminated unexpectedly during startup.
Details:
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Machine
Interface: IMachine {99404f50-dd10-40d3-889b-dd2f79f1e95e} Kernel log
Code:
So, i've rebuilded all VirtualBox dependencies with safe flags, then i've recompiled most of the sys-* packages also with safe flags. However VirtualBox still doesn't work.
UPD: virtualbox-bin-3.1.4
UPD2: 3.1.6 and ose-versions crashes with same errors
View 2 Replies
ADVERTISEMENT
Jun 6, 2011
When i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
View 3 Replies
View Related
Sep 14, 2010
I have installed virtualbox on opensuse 11.2 64bit.
When I go to open a machine it says
"Failed to open a session for the virtual machine Windows XP. The virtual machine 'Windows XP' has terminated unexpectedly during startup with exit code 1."
"
Result Code:
NS_ERROR_FAILURE (0x80004005)
Component:
Machine
Interface:
[Code].....
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary."
View 9 Replies
View Related
Feb 19, 2010
after upgrading VirtualBox from 3.0.x to VirtualBox-OSE-3.1.2-1.fc12.x86_64 VBox fails to start any virtual machine with error: Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
When I run
sudo /etc/sysconfig/modules/VirtualBox-OSE.modules
I get
FATAL: Error inserting vboxnetflt (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetflt.ko): Invalid module format
FATAL: Error inserting vboxnetadp (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetadp.ko): Invalid module format
Kernel is (obviously) kernel-2.6.31.12-174.2.19.fc12.x86_64, but same thing happens with any installed kernel, IE kernel-rt-2.6.31.12-1.rt20.1.fc12.ccrma.x86_64
I reinstalled VBox and kmods got rebuilt but the problem persists.
View 2 Replies
View Related
Feb 11, 2010
Hello, im running ubuntu 9.10 on my laptop and im trying to make a win xp vbox and when it gets to the part where is is creating the virtual hard drive (30GB in my case) it just stays at 0%. I left it running last night and went to bed, in the morning it was still at 0%. Now iv just tryd it again and its been sitting for about 2 hours now and still at 0%.
View 2 Replies
View Related
Dec 10, 2009
How do I import an existing Virtual Machines, like if I have a dualboot and make a new VM in the other OS or if I reformat and transfer the files back in.
View 4 Replies
View Related
Jul 4, 2010
Every time I try to start a virtual machine in VirtualBox I get this error:
Code:
Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. So I run '/etc/init.d/vboxdrv setup' in the terminal as root and I get this:
[Code]...
View 14 Replies
View Related
Jun 18, 2010
i want to run winxp really bad in virtual machine, but have yet to get the programs to open without error.
View 14 Replies
View Related
Jul 2, 2010
How do I can do to make the virtual machine with virtualbox has more sound?
View 2 Replies
View Related
May 13, 2010
I recently installed VirtualBox 3.1.8 r61349 from the deb file virtualbox- .1_3.1.8-61349~Ubuntu~lucid_amd64.deb onto a recent clean install of Lucid Lynx on my HP p6210f (6144 MB RAM, AMD Athlon II X4 620 CPU). I then imported a friend's VM and tried to boot it. The VM consistently hangs with the following showing on the console (this is the last 3 lines, for context):
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
I thought initially it was a problem with my friend's VM, so I decided to create a new VM from scratch, and boot from a CentOS-5.4-i386-DVD instead, which I have done before with previous versions of VirtualBox. When I do that, I'm able to select my installation method (so I know it's booting from the CentOS ISO), and then it hangs at exactly the same point. I couldn't find any other mention of this problem, but it's a pretty recent release of VirtualBox - I think just days old.
The VM: OS Type=RedHat (presumed 32-bit), 1 processor, 1024 MB RAM
View 5 Replies
View Related
Mar 10, 2009
Running Fedora 10, I installed CentOS 5 in Virtualbox, but I can't ping the Virtual Machine...
From within CentOS, I can ping my laptop [known as the host?] but from the laptop I can't ping the CentOS Virtual Machine. I tried turning off the firewall on both too... CentOS was able to access the internet through my laptop right away without any configurations too.
Unless someone has an idea to resolve the above, I am also wondering about something else VirtualBox-related:
To see if it was possible to get around the above issue, I was going to install another CentOS virtual machine to see if I can get them to communicate both ways [if at all], but to do so, I think I have to install CentOS AGAIN on another allocated amount of hard disk space. This will take some time, so I was wondering if anyone knew if it was possible to just create a quick duplicate of the previous installation, if you wanted 2 different virtual installations of the same OS.
View 2 Replies
View Related
Jun 28, 2010
My laptop is running Linux Mint 9 and I am trying to install Fedora 13 in a virtual machine within Virtualbox. However, it's not working. It takes forever to get past the initial white/blue loading bar when it first boots and then it just goes white, so I can't see anything. I've already tried modifying the bootline parameter of the live CD to include noprobe, noacpi, noapic, nousb, and nofirewire. However, the result is the same. Am I missing something? Is it possible to install this?
View 1 Replies
View Related
Jul 11, 2011
I created an archlinux vm guest using virtualbox on my windows desktop at work. I'm planning to use it for django development because there are no unix machines available to use as a workstation at work.
From the vm guest I can ping/ssh to other machines in the network, but not the other way around. It's like even though the guest machine has an ip address on the network and a hostname, neither is recognizable.
View 1 Replies
View Related
Sep 21, 2010
I'm ssh'ed into a machine and logged in as a different user. Is it possible to open a few new windows that will still be ssh'ed into that same machine, still logged in as that user?
View 2 Replies
View Related
Jul 6, 2010
I have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig
eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0
inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
[code]....
View 3 Replies
View Related
Feb 20, 2011
Are there any open source Virtual Machines which have web based administration. I am setting up Ubuntu 10.4 x64 and would really like to find a usable virtual machine manager. I really like Virtualbox but only the full version has web based administration. I have also tried VMware but it isn't open source.
View 9 Replies
View Related
Apr 11, 2010
The following message comes up when I boot up: Logging in user Warning: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0. When I press OK, the system completes the start up and everything looks normal. But when I try to connect to internet, I get the following message:
KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution. KNetworkManager will not start automatically in future. If I reboot the system, I logg in successfully. So far the problem has appeared approximately upon every second time I boot up. Rebooting the system seems to take care of it.
Don't know what info is of interest. I'm using
Opensuse 11.2
KDE 4.4.2 (Factory)
After upgrade from 4.4.1 to 4.4.2 it worked fine for a week or so.
View 9 Replies
View Related
May 13, 2010
I do a clean install of slackware64 13.1 beta1 with KDE and switch default runlevel to 4 in /etc/inittab.
I try to login in kdm, I always come back to the login....
I try this with default runlevel 3 and an .xinitrc with "ck-launch-session startkde" .. works without problems, so I switch back to default runlevel 4, now i can login and only get the error "Cannot open ConsoleKit session: Unable to open session..."
Here are some logs
syslog
Code:
Code:
View 2 Replies
View Related
Jun 2, 2011
My goal is to install Windows 7 on a virtual machine running on Ubuntu. The Lenovo machine came with Windows 7 installed, but did not come with a boot disk. What are my options? Should I ask Lenovo for a disk? Will I need to purchase Windows just for the virtual machine?
View 3 Replies
View Related
May 27, 2010
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies
View Related
Jun 28, 2011
Is there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
View 1 Replies
View Related
May 24, 2009
I'm getting these messages Over SSH with the -D switch
Code:
At uni I did this for a couple of reasons, primarily to connect to trackers for bittorrent. I would get these messages fairly often but I never thought much of it because I figured I was just loosing packets over the network or something (understandable in my situation). At home I decided to continue to use this method because that computer is set up in DMZ and is very useful. I havn't received many of these messages but recently all my torrents stalled and I had a whole bunch of these messages. Is it possible my computer just cant handle all the network connections (it's a 2ghz AMD running debian)? What exactly do these messages mean? Is there any way to optimize my connection in any way?
View 1 Replies
View Related
Aug 14, 2010
Can I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
View 2 Replies
View Related
Feb 3, 2010
how to use CTRL-ALT-DELETE on a virtual Windows machine on my Virtual Box?
View 2 Replies
View Related
Jan 2, 2011
How do I program a virtual machine to auto-start/boot upon boot up of the host system? I am experimenting with SNORT network intrusion detection system and have installed it inside a virtual ubuntu box which I want to start automatically.
View 1 Replies
View Related
Jan 3, 2010
I read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
View 1 Replies
View Related
Dec 3, 2008
I have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
View 2 Replies
View Related
Jul 29, 2009
I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies
View Related
Jan 27, 2010
I have configured a squid proxy; it's running, but there was a problem: it does not provide service to client side.
The error was: "could not connect to session manager" "cannot open the network socket"
View 1 Replies
View Related
Oct 11, 2010
On a fresh install of the Meerkat release candidate, I've installed the latest VirtualBox (3.2.8-64453, not open source version). When I run it, I get a user-agreement notice box as expected.
But, (1) sometimes immediately thereafter, or if not, then (2) as soon as I move the mouse pointer or (3) after I use the PageDown key to get to the bottom of the agreement text and use a key combination for "I agree," my Ubuntu user session crashes and I have to log in again.
The only other weird symptom I'm having is that I cannot set visual effects to anything but "None" (if I attempt to, I get an alert "The Composite extension is not available").
Perhaps there's a video-related problem underlying both issues, i.e., the X server is failing in both cases?
View 9 Replies
View Related
