Server :: Rndc - Connect Failed - 127.0.0.1#953 - Connection Refused
Apr 27, 2009
Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :
The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)
WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes
NDC command failed : rndc: connect failed: 127.0.0.1#953: connection refused
But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.
Server details :
Red Hat 4.1.1-1
View 15 Replies
ADVERTISEMENT
Nov 30, 2010
We have ubuntu server and bind9 installed and setup.When I issue rndc reload or /etc/init.d/bind9 reload I got this:rndc: connection to remote host closedThis may indicate that* the remote server is using an older version of the command protocol,* this host is not authorized to connect,* the clocks are not syncronized, or* the key is invalid.If I issue named-checkconf /etc/bind/named.conf I got this:/etc/bind/named.conf.local:165: unknown key 'rndc-key'I got the key files in the right location but I'm not sure if we even need to use them.
View 2 Replies
View Related
Apr 28, 2010
vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".
View 7 Replies
View Related
Mar 13, 2011
I have a Rackspace server running Ubuntu Lucid Lynx, where I have installed an IRCd-Hybrid. I can connect to the IRC server using irssi that was installed on the same machine where the server is, but when I try to access it from my computer at home or my friends try I get this error: Code: Connection Refused What should I do?
View 1 Replies
View Related
Mar 16, 2010
When I was checking the /var/log/messages, I found these entries:
Mar 16 15:14:38 localhost smbd[13347]: [2010/03/16 15:14:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:14:38 localhost smbd[13347]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13691]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13691]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13692]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13692]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13716]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13716]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13718]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13718]: Unable to connect to CUPS server localhost:631 - Connection refused
CUPS is stopped in the system and the system is configured as samba server. What could be the reason for these printing requests from smbd?
View 13 Replies
View Related
Jan 7, 2011
I am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.
View 2 Replies
View Related
Dec 20, 2009
I have FileZilla installed on this machine, and OpenSSH (with an open port 22) on another machine on my home network. When I try and connect, I get: Quote: Status:Connecting to 192.168.2.3... Response:fzSftp started Command: open "alphatwo@192.168.2.3" 22 Error:Connection refused Error:Could not connect to server
Which has left me puzzled as I have an open port. Does the username have to be defined somewhere? E.g. the machine acting as my SFTP server can be logged on to locally as alphatwo so that's what I logged in as (with the correct password). Is this correct? If so, does anyone have any ideas as to how I might rectify it? I want SFTP set up so I can copy PHP files from my laptop to /var/www/html/ on another PC (across the home network).
View 4 Replies
View Related
Apr 6, 2010
For some reason my mail server (Postfix) seems to have stopped delivering mail.
The error in the mail logs is "status=deferred (delivery temporarily suspended: connect to 127.0.0.1[127.0.0.1]: Connection refused) against all mails.
I have researched to try and find an answer, most information on this problem seems to point to a malfunction in the Anti Virus and Spam Filtering solution.
I have checked that Amavisd and Clamd are both operating and have restarted Postfix but all to no avail, squirrelmail is not working either.. ie not even producing a login page.
I have not changed anything in the config and am just wondering if anyone has experienced similar and could point me in the right direction of a solution.
View 5 Replies
View Related
Jul 4, 2010
I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.
I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.
[Code]....
View 9 Replies
View Related
Aug 7, 2011
I have my DNS configure in 2 zones. 1 internal, and the other external. DNS is chrooted under /var/named/chroot amd has been operating without any problems for well over 2 years now. I have recently run cross the problem shown in the subject line. When I try to freeze the internal dehnert.com zone with the following command...rndc freeze dehnert.com IN internal
I get the error...
I have been running the command as root, and with iptables turned off, so there is no firewall to restricting access. (the system sits behind a firewall) I have been searching the forums all over, but I havent run across what might be causing me to have root denied access. If anyone has seen any problem like this, please point me in the right direction so I can iron this out.
My named.conf is as follows...
View 1 Replies
View Related
Dec 7, 2010
I am getting this error message on ktorrent on slackware 13.1 64. Few days ago I was using ktorrent for torrent downloads and it was fine, but not i can't star any download or any kind of torrent, it just keeps returning the error and it's not working at all.
View 1 Replies
View Related
Aug 31, 2009
I Get message Connection refused when trying to connect to other computer in network. My System Ubuntu:
computer1 ip: 10.0.0.1
computer2 ip: 10.0.0.2
computer1 shell:
$ ftp
ftp> open 10.0.0.2
ftp: connect: Connection refused
View 12 Replies
View Related
Jun 15, 2010
I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get:
WARNING: greetings.com: selfcheck request failed: Connection refused
View 2 Replies
View Related
Feb 14, 2011
I have a new Ubuntu server (10.10), named Denholm, recently installed and updated. I came in this morning, attempted to add a package with apt-get, and got a "Connection refused" response. I have another server (also 10.10), named Moss, on the same network that can connect successfully.
Here's what I've found/tried so far:
This doesn't look like and apt problem anyway, but the sources.list files on Denholm and Moss are identical.
I can ping [URL] (and other sites) successfully from Denholm.
I have tried 'wget www.google.com'. From Moss the wget is successful, but from Denholm I get "Connection refused."
I have a web server on Moss and Denholm can successfully access it.
To the best of my knowledge, Denholm is not configured to use a proxy server (no http_proxy variable set).
View 1 Replies
View Related
Feb 27, 2010
I researched a long while and could not find an answer to these problems, so here I am. I have a debian server running on my home network. I have it running LAMP and it has a live website.
I have samba running and share files with my windows 7 machine, so they do connect.
When i try to use putty it always refuses the connection.SQLyog tells me off too, but it only cays it cannot connect.
I was checking into SSH, since that is how they are both trying to connect, but I can not find adequate info online for my problem.
I have debian lenny running, I was pretty sure it has ssh running, but i couldnt locate 'sshd'
Is SSH on there by a different name or do I need to install the service.
(ps - getting samba running was a nightmare, but i think it was windoze fault, i tried setting up the debian machine exactly how the guides said to do, but it never could connect and denied passwords constantly, then the next day after a few windows reboots had happened, all of the sudden it worked. Don't know what the deal was there. Could that be instrumental? Sorry I am a web dev and not a networker so this stuff is not my forte.)
View 2 Replies
View Related
Dec 11, 2010
I cannot use GRsync from Ubuntu Desktop to PCLinuxOS laptop.The 2 computers can ping each other. I have disabled both firewalls. My laptop IP address is 192.168.1.11This is the error on Ubuntu Grsync:
ssh: connect to host 192.168.1.11 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.7]
Rsync process exit status: 12
On PCLinuxOS it wont say Ethernet is connected when trying a static address setup.However it does connect to the internet via auto Ethernet setup and a LAN cable. It then says connected. In order to use SSH and GRsync what programs are required? I have these installed on both machines: grsync openssh-client openssh-server
View 5 Replies
View Related
Jun 15, 2011
I am facing trouble to scp from server to to my local machine where as the vice-vesra is working fine.
The error is like below.
lost connection
View 4 Replies
View Related
Jul 8, 2011
I am facing an error when I run the following command telnet localhost 7777
Trying ::1...
telnet: connect to address ::1: Connection refused
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
View 2 Replies
View Related
Apr 7, 2010
I reinstalled unbuntu server recently and i am trying to get it to only allow one computer to accsess it. So after doing this etc/ssh/ sudo nano sshd_config I uncomment #ListenAddress 0.0.0.0 Ok so i am trying to accsess my server from a windows machine so i tpyed ipconfig /all to find my ip I found the IPV4 address and i put that address like so ListenAddress 192.168.1.22 But when i try and connect it says connection refused.
View 6 Replies
View Related
Mar 26, 2011
lpr: can't connect to remote host (127.0.0.1): Connection refused
[root@l-GZ:/]# usb 1-1: new full speed USB device using sl811-hcd and address 3
View 2 Replies
View Related
Jul 21, 2010
I want to create script wherein it will check the application if its running. The command that I'll be using to check the application is telnet (if you can recommend others, that's ok). I've an application and it is listening to port 1808. If I do telnet localhost 1808, the response is :
Code:
[root@test ~]# telnet localhost 1808
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
What I want to happen is if the response is like to code above, it will execute a commands. Obviously, above code knows that the application is not working so I need to execute a commands. I created a script before using expect but I don't think it will work because I haven't establish a shell yet unlike successful telnet I could spawn expect.
View 5 Replies
View Related
Sep 12, 2010
I have become convinced that rsync for CentOS 5 is broken. I'm trying to set up automatic backups between 2 servers in 2 different countries using rsync under CentOS 5.I can get manual backups to work between the 2 servers by doing two things I shouldn't need to do, but automatic backups fail and I see no solution.Here are the problems I am encountering: According to the instructions I've read everywhere, I am to set up two configuration files:
/etc/rsyncd.conf
/etc/rsyncd.secrets
When I run rsync from root, it apparently just totally ignores these two files. No custom greeting, no log, no password used.
Even when I specify --password-file=/etc/rsyncd.secrets in the command line, it still ignores it. I am prompted and I must enter the password manually. Let me back up a moment. After first installing rsync, when I ran any command to access the root server, I get this error:
ssh: connect to host 111.222.33.44 port 22: Connection refused
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(463) [sender=2.6.8]
I read everywhere that rsync uses port 873, not port 22 which is used for SSH. Why is rsync on CentOS trying to use port 22?I have SSH switched from port 22 to another port (let's call it 5432 here) and block port 22.So, I have added this to the command line:
--rsh='ssh -p5432'
Then I get a connection ...
... but it prompts me for my password. It doesn't matter that I have my username and password, same one, in /etc/rsyncd.secrets on both servers. It still asks.And it rejects my password!The only way I can get it to connect is by creating an SSH user on the remote server for this.Even then, rsync STILL prompts me for a password, even though:
1. the username and password are specified in the /etc/rsyncd.secrets files on both servers
2. I've added the command line parameter --password-file=/etc/rsyncd.secrets Therefore, it is totally impossible to use an any cron job or other automatic synchronization, under CentOS 5.
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
rsync -av --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* 111.222.33.44:httpdocs/rsync
rsync -av --verbose --progress --stats --password-file=/etc/rsyncd.secrets --rsh='ssh -p5432' sourcefiles* rsyncusername@111.222.33.44:httpdocs/rsync
Yes, I have made sure that I have the latest rsync. I have run yum update for everything.Yes, I have double checked, triple checked, and quadruple checked my config files.
View 2 Replies
View Related
Feb 3, 2010
I installed required updates on my linux installation (ubuntu 9.4) I am now unable to access my localhost, and get the following message from my browser: Failed to Connect Firefox can't establish a connection to the server at localhost. Though the site seems valid, the browser was unable to establish a connection. I checked my hosts file which has the following information:
[Code]....
View 6 Replies
View Related
Nov 27, 2010
I have my desktop computer (running F13) configured to accept ssh over port 22 via the firewall configuration tool. If I type ifconfig -a, this computer, which is running on my wireless network, tells me:
Code:
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
However, if I go to my laptop computer (also running F13) and try and ssh into the desktop, i.e. ssh icthy@192.168.1.100, I get this response:
Code:
ssh: connect to host 192.168.1.100 port 22: Connection refused.
I guess I am confused to what is blocking the connection? Is there another means on F13 other than the default Firewall? I haven't really messed with the network at all. For what it's worth, I am hoping to set things up so I can just ssh into the computer name, (ssh icthy@desktop) eventually, but want to start with the IP. So, can anyone offer a hint as to what I can look for that is blocking port 22?
View 3 Replies
View Related
Feb 20, 2010
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 9 Replies
View Related
Mar 13, 2011
I have a Rackspace server running Ubuntu Lucid Lynx, where I have installed an IRCd-Hybrid. I can connect to the IRC server using irssi that was installed on the same machine where the server is, but when I try to access it from my computer at home or my friends try I get this error:
Code:
Connection Refused
What should I do?
View 1 Replies
View Related
Jul 21, 2011
I'm having problems with ssh and don't know what else to do. I keep getting "ssh: connect to host stop port 22: Connection refused" when i try to stop or start ssh:
[Code]....
View 2 Replies
View Related
Feb 19, 2010
I am getting "ssh:connect to host restart port 22: Connection refused" error when trying to start "ssh" in Ubuntu. I uncommented the port 22 in ssh_config, I dont have iptables setup...Did try to check if the port is listening using the netstat -an | grep "LISTEN" & couldnt find.
View 14 Replies
View Related
Mar 18, 2011
My problem is that the Mailserver in OpenSuse 11.1 (postfix, amavisd, spamassassin, clamAV en Razor) can not recieve e-mails, outgoing is ok. The problem started when I added 2 new users to de LDAP-server connected to Postfix.Some users can login, but most of them are getting the error: cant connect POP3 connection refused port 995.
View 9 Replies
View Related
Jul 3, 2011
My system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
View 1 Replies
View Related
