Ubuntu Multimedia :: PulseAudio Volume Control - Connection Failed:Connection Refused

Jul 4, 2010

I tried to finally set-up surround sound on my Ubuntu 10.04 machine and i was successful in doing so after a while of changing settings and tinkering. After doing so though, i was later in the day not able to get into the Pulseaudio Volume Control, therefore, everything is stuck where it is and i can't change anything. When i try to open Pulseaudio Volume Control i get the error message, Connection failed, Connection refused. My programs still play sound and i can control the sound of the programs through the programs, but i cant control the sound of the sorround sound now and my main sound bar only affects my stereo speakers, not the surround ones.

I believe this may have happened after the random disk check on restart, but i can't 100% confirm that and i'm not even sure if they are related. I still have sound, but i have no way to control the volume of my entire system at once. I did some looking around online and saw that others are having or had the same issue, and it was through different versions of Linux also. somehow reset everything so i can access PAVC and start over . I also tried steps listed in another thread here on the same topic, but they weren't working and it also seemed to be for older Ubuntu versions.

[Code]....

View 9 Replies


ADVERTISEMENT

Server :: Vsftpd Not Working: Connection Attempt Failed With "ECONNREFUSED - Connection Refused?

Apr 28, 2010

vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".

View 7 Replies View Related

Ubuntu Multimedia :: Pulseaudio Volume Control Gone From Panel

May 4, 2010

I upgraded from 9.10 to 10.04 and my volume control disappeared from the panel. I have reinstalled pulseaudio but it had not re-appeared. I can't find it in the Add Panel list nor can I find it in the Pulseaudio volume control application as an option.

View 5 Replies View Related

Ubuntu Multimedia :: Control Pulseaudio Volume From Kmix?

May 7, 2010

I've just upgraded to kUbuntu 10.04. I've been using Gnome for a few years now, and felt the need to try KDE again. I've managed to get my NVidia 8200 with HDMI audio working, but have one last annoying issue.

I can't control volume with my RF remote or keyboard.

More to the point, the keys control the sliders in kMix, but to no effect on the sound. This is likely because I need to use Pulseaudio to get my HDMI working. The sliders in Pulse volume control, control the volume nicely. Either I need a way to force kmix to talk to pulse, or a way to re-map these keys to control pulse.

View 1 Replies View Related

Ubuntu Multimedia :: Stuttering - Pulseaudio - Missing Volume Control

Nov 24, 2010

i recently did a clean install of 10.10 to an old box i had so i could mess around with it and learn. however, all audio (and videos too) would stutter and play very quickly (a 1 minute videos video would play in about 45 seconds). so i followed the solution found here: [url]

this fixed the playback problems perfectly, however, i lost the volume control applet in the upper-right of the screen. reinstalling to volume control and then adding the "indicator applet" back to the panel adds a non-functional volume control icon and an additional mail icon.

View 2 Replies View Related

Debian Multimedia :: Testing / Sid Pulseaudio Volume Control Bug?

Mar 6, 2010

I'm having a problem with Pulseaudio for quite some time, I already made some topics about it. But still no solution. The thing is, I can't use my keyboard volume control, it's only manipulating my ALSA configuration. Not my main Pulseaudio volume. Here is some information about my sound card:

$ pacmd list-cards
Welcome to PulseAudio! Use "help" for usage information.
>>> 3 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
[Code].....

View 1 Replies View Related

Ubuntu Multimedia :: Global Hotkeys To Control Banshee/Rhythmbox/etc Volume With PulseAudio?

Jan 14, 2010

For awhile now, I've been trying to set two global hotkeys to control my volume level in Banshee. Before anyone comes in here and says to use the Volume Up/Volume Down keybinds in gnome-keybinding-properties, that does not work. That controls the master volume. I'm looking for a global hotkeys that control JUST the application volume.I've been playing around now, and I think I might have found a way. Since 9.10, Pulseaudio is integrated and the default sound manager. It also allows controlling the application volume level. While changing the volume would be through Pulseaudio and not in the specific application, this would work.

My question is if there's a way to set a keybind to control a specific application's volume within Pulseaudio? Or even a way to set a keybind to the event that happens when a specific application's volume is turned up or down within Pulseaudio.

View 9 Replies View Related

Server :: Rndc - Connect Failed - 127.0.0.1#953 - Connection Refused

Apr 27, 2009

Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :

The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)

WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes

NDC command failed : rndc: connect failed: 127.0.0.1#953: connection refused

But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.

Server details :

Red Hat 4.1.1-1

View 15 Replies View Related

General :: Amanda Backup Error - Selfcheck Request Failed Connection Refused

Jun 15, 2010

I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get:
WARNING: greetings.com: selfcheck request failed: Connection refused

View 2 Replies View Related

Ubuntu Networking :: Setting Up Bluetooth Connection Between Two Computers Throws Connection Refused (111)

Apr 3, 2011

I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.

Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).

Any clues over here? I'm using pand 4.91 and blueman.

View 3 Replies View Related

Debian Multimedia :: Sound Won't Work Audio Connection Refused

Jan 4, 2010

i have both pulseaudio and gstreamer installed, my "multimedia audio controller" claims to be a ESS Technology ES1988 Allegro-1 in the system information window and in the report i generated it says my Audio Adapter is "MPU-401 UART - MPU-401 UART" PulseAudio tells me Connection failed: Connection refused and the volume control that came with the system says No volume control GStreamer plugins and/or devices found. I am not understanding, here. do I need some driver that i don't have? i installed all the gstreamer plugins that seemed to pertain to volume that i could find. If i am not very much mistaken, I am using Debian Lenny.

View 5 Replies View Related

Networking :: Open Connection Receive A Message "connection Refused"

Apr 6, 2010

i m using RHEL5 on my server machine and open suse 10 on my client machine.both system ping each other, firewall is off of my server machine,i put a file from my client to my server machine using scp command but ftp command is not working when i want to open connection i receive a message "connection refused".what can be the issue?

View 5 Replies View Related

Fedora :: The Volume Control Tray Icon Was Disappeared When Removed Pulseaudio

Oct 17, 2009

Because of a horrible problem (volume bursting, this is known bug), I completely removed Pulseaudio and some related packages. So I'm now using pure ALSA, and it's working fine. Yet, the volume control tray icon was disappeared. How can I recover it?

View 9 Replies View Related

OpenSUSE Hardware :: Setup Multipath With Failover Policy On 11 - Connection Failed Over To Second HBA Connection To SAN

Aug 13, 2009

I am trying to setup multipath with failover policy on openSuSE 11. I have two qla2xxx HBA's installed and they appear to be working. Here is the output of "multipath -l" command

[Code]....

While testing, I pulled one of the two connection to SAN, and the connection failed over to second HBA connection to SAN. When I plug the cable back in, it does not fall back to original connection... It stays in failed state. Also, I noticed that failed disk (sdd disk) comes back as (sdg disk), which is probably why connection does not fall back to original HBA. But, when I run "/sbin/service multipathd restart" sdg disk shows as as enabled in multipath -l...

View 9 Replies View Related

Hardware :: Error - Saving Connection Failed 0 Can't Write Connection Type 'cdma'

May 21, 2011

I got an error while working with NetworkManager in new RHEL6/ Fedora14. I have a ZTE AC 2726 3G wireless modem. i had tried to connect it via NetworkManager . It only requires username and password to connect but the thing is that after putting all the credentials i had checked the option" available to all the user "and while i was trying to save the profile it shows the following error saving connection failed 0 can't write connection type 'cdma'I had google so many times around this error but no better solution is there .

View 1 Replies View Related

Ubuntu Multimedia :: PCM Volume Not Affected By Master Volume Control With Alsa

Mar 7, 2011

I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.

First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.

View 1 Replies View Related

Ubuntu Multimedia :: Usb Headset - Cannot Regulate The Volume Of The Phones (output) Anymore With Gnome-volume-control

Jun 12, 2010

since using 10.04 I have a big problem with my usb headset (freetalk everyman)

1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.

2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:

[Code]...

View 6 Replies View Related

Ubuntu Multimedia :: Volume Control Can Only Do Mute Or Full Volume?

Oct 31, 2010

I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.

View 2 Replies View Related

Ubuntu Multimedia :: Very Little Control Over Volume Using Master Volume Level?

Apr 10, 2011

My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.

It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.

View 3 Replies View Related

Debian Multimedia :: Connection Failed To Server

Jan 26, 2016

I'm working on getting a Debian box up and running for training labs for Cisco, and would like VNC access to this Debian box. My main laptop is a MacBook Pro, and I have a Windows 10 desktop.What the problem is: Using the MBP's built-in VNC viewer, I receive a "Connection failed to "Server" Make sure Screen Sharing or Remote Management is enabled on the remote computer. using Chicken (of the VNC), I receive a "The server refused the connection".I'm using tightVNC as a server on the debian box. This is a fresh install of Debian.URL...

View 8 Replies View Related

Ubuntu :: SSH Error:Connection Refused?

Mar 25, 2011

I've just completed a fresh install of Ubuntu Server (x64) on a HP Proliant N36L. During the installation I selected to install LAMP, SAMBA and SSH. To continue the installation of software on the server I wanted to connect remotely from windows PC on the same LAN. I am using PuTTY but when I try to connect I get "Error:Connection Refused". I have trawled the forums regarding the setup of putty and openssh and everything appears to be correctly configured.I have checked that the services are running on the server and that the IP address for the server is correct.The guides I have read online suggest that ssh should be correctly configured as part of the install, so why can I not connect from the same LAN?Is the firewall enabled by default during install?

View 2 Replies View Related

General :: 127.0.0.1 Connection Refused ?

Nov 27, 2009

Regarding fedora12. how to set up the port 8080 and or tell me why I cannot connect to localhost 127.0.0.1?

I tried to add port 8080 to firewall under other ports, but still doesn't work.

View 1 Replies View Related

Ubuntu Networking :: Get A 'Connection Refused' Error

Apr 21, 2010

I need to browse the net more securely and bypass throttling by an infrastructure-dictator by creating a SSH Tunnel directly to my internet service provider and use it as proxy.

I tried both a dynamic and local tunnel, was a able to connect to the server and log-in just fine, but when I tried to surf I get a 'Connection refused' error.

Here's what I tried:

Code:
ssh -D 8022 user@tunnel.host -N
ssh -L 8022:tunnel.host:8080 user@tunnel.host -N
(not at the same time of course)

Then I set 127.0.0.1:8022 as proxy in browser settings. As long as the tunnel is open the browser displays a blank page with no error when I try to open a remote web page, while the terminal gives me a 'Connection refused' error.

I'm using OpenSSH_4.7p1 Debian-8ubuntu1.2, OpenSSL 0.9.8g 19 Oct 2007 on Xubuntu Hardy.

In case anybody is wondering this is perfectly legitimate. The tunnel.host I connect to is a server set-up by my ISP specifically for this purpose.

Either of the examples above should work as others who have the same ISP reported that it works. Therefore, I suspect this is an issue with my own security settings which are slightly on the paranoid side but I can't figure out what. Stopping ufw and explicitly opening port 8022 didn't help.

View 1 Replies View Related

Ubuntu Networking :: Ssh/sftp Connection Refused?

Jun 13, 2010

I'm trying to establish a connection between two laptops using sftp but am getting the following error message:

Connecting to <IP>...
ssh: connect to host <IP> port 22: Connection refused
Couldn't read packet: Connection reset by peer

ftp isn't working either. Both machines are running Ubuntu and connect to the internet through the same wifi router in case that's relevant. What could be the problem?

View 4 Replies View Related

Ubuntu Networking :: Connection Refused Through Wifi?

Jul 23, 2010

I cant connect with ssh to my workstation using my notebooks wireless lan. with cable I'm able to connect.so the funny thing is, if I first establish a connection from my workstation to my notebook (like ssh it or just ping the notebook) I'm able to create a ssh connection from my laptop to the workstation using wireless lan.scanning my workstation from the wireless lan of my notebook with

Code:
nmap -sT -p 22 ventury
says port 22 is closed

scanning it from the notebook with cable lan,it says port 22 is opened

scanning it from the wireless lan of my notebook an have sent a ping from the workstation before says port 22 is opened.ution.

I got a 64bit version of Kubuntu 10.04, up to date, installed on both, my workstation(ventury) and my notebook (defiant).the question is: Do I always have to ping my notebook first if I want to ssh from it to my workstation or is there some other solution? And why does it work fine with cable, but not with WiFi?

View 4 Replies View Related

Ubuntu Networking :: Port 22:connection Refused With SSH

Dec 21, 2010

having a port 22:connection refused problem with SSH. None of what I have read has been what I have been experiencing, so I figured I would post here. The worst that could happen is this gets completely ignored, or I am told that there is already a solution, that I missed it, and directed to it. Here is my problem:

Just learned how to ssh into my machine a few days ago. Everything has been running smoothly until I ran into a little problem: all of a sudden I can't connect anymore. I have sshd-server installed and updated. I have sshd turned on

Code:
/sbin/service sshd start
And I even ran:

Code:
/etc/init.d/sshd start
Because I was told that it would start ssh from boot. Nothing has changed from today and yesterday and I haven't been having problems with port 22 being blocked.

I have also tried to ssh into the machine by the machine itself:

Code:
ssh <IP of machine>
with the same error.

View 4 Replies View Related

Ubuntu :: Sshd Not Running, Ssh Connection Refused?

Mar 13, 2011

I have been trying for weeks to solve this one and have researched everywhere I know to look. Nothing has helped. I am trying to ssh to my other machine (machine1=galla, machine2=cachin). Both run Maverick Meerkat 10.10. I get the following error when trying to ssh to galla:ssh: connect to host galla port 22: Connection refused

uname -a outputs:Linux galla 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/LinuxAlso, sshd does not stay running. I can start it, but a ps tells me it is never running. I imagine herein lies the problem. But why won't it stay running?I am not running any firewall on galla (iptables -L told me that).P.S. I can sucessfully ssh out of galla to cachin. And, even if I just try to ssh localhost on galla, same thing happens.

View 9 Replies View Related

Ubuntu Servers :: VsFTPd - Connection Refused

May 29, 2011

Connecting remotely through FileZilla works ok, but I can't connect from localhost (FWIW I'm running WordPress and would like to be able to upload plugins from the dashboard).

I've got vsFPTPd installed and - I think - running:

Code:

# service vsftpd start
vsftpd start/running, process 25782

All ok so far... however I can't see it on any of my ports:

Code:

# nmap localhost
Not shown: 995 closed ports
PORT STATE SERVICE
22/tcp open ssh

[code]....

And of course if I

Code:

telnet localhost:21
That's 'Connection refused...'
Nothing in 'netstat --listen' either.

The odd thing is, I can connect fine using FileZilla.

To confirm, I have

Code:

local_enable=YES
set in my vsftpd.conf.

View 6 Replies View Related

Debian :: Openssh - Connection Refused

Apr 13, 2016

When I connect with my vps server through openssh, doesn't establish connection. Openssh is active (see its status), port 22 is open, the sshd_config file is the same of original copy (I have saved one in the case I did a mistake) the only line different permitrootpassword is set on ''no'', there isn't a firewall that block ssh connection and with other remote desktop control like remmina works well.

View 13 Replies View Related

Red Hat / Fedora :: Cvs Installation - Connection Refused

Mar 31, 2010

I am trying to install the cvs server for the first time on centos , the sercive xinetd seems to start. but when i try to connect to the server using this command cvs -t -d server

It prompts for the password once i enter the password it gives me the error - cvs: Connection refused

Secondly if i telnet to the port 2401 it gives Trying 10.... telnet: Unable to connect to remote host: Connection refused

I checked the if the port is up by netstat-tulpn /netstat -na didnt show me the port 2401

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved