Server :: Error: Secure Connection Failed

Jan 3, 2010

My server is suddenly getting giving the following error: Quote: Secure Connection Failed An error occurred during a connection to inenergy.dvrdns.org. SSL received a record that exceeded the maximum permissible length. * The page you are trying to view can not be shown because the authenticity of the received data could not be verified. * Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site. I had been trying to configure the server to do secure logins (before Christmas) , but I don't think I had completed the configuration and I'm not sure how to reset it so that I can start again.

View 1 Replies


ADVERTISEMENT

Ubuntu Servers :: SSL Setup - Connection Error Unable To Make A Secure Connection To The Server

Feb 10, 2011

I am running an Ubuntu Server on a VirtualBox VM running on my windows machine. So I've created a self-signed certificate using the following tutorial: [URL]

From this tutorial I'm left with 3 files:
server.key
server.csr
server.crt

Then I found this very similar tutorial that has an extra bit on installing the certificates in apache: [URL] So I followed it's instructions which boil down to this:

[Code]...

So I'm thinking this should work now. However in Chrome I get: SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. IE8 gives me a typical "Internet Explorer cannot display the webpage" Note that [URL] fails while [URL] works fine, so it's definitely something in my ssl setup I'm thinking.

View 5 Replies View Related

Ubuntu :: Apache2 SSL Setup - Secure Connection Failed

Mar 23, 2010

I followed the tutorial found here [URL] but when I try to access [URL] I get the following:
Code:
Secure Connection Failed
An error occurred during a connection to www.mydomain.com.
SSL received a record that exceeded the maximum permissible length.
(Error code: ssl_error_rx_record_too_long)
Not sure what I might have done wrong... I have retraced all of my steps and I don't believe I missed anything.

View 2 Replies View Related

Ubuntu Networking :: SSL Handshake Failed - Secure Connection Truncated

Jun 16, 2010

I'm having a problem with Subversion. When I try an "svn up" it gives me this error message:
SSL handshake failed: Secure connection truncated
I'm running Ubuntu 10/4 but I also had this problem with 9/10. Does anyone know what this error message means? It appears to be an SSL problem but it's not clear to me what exactly the problem is. I do not have this problem with svn on my other office computer, nor my home computer. FYI, I'm running subversion on the Regina project.

The full error message is this:
Code:
svn up
svn: OPTIONS of '[URL]': SSL handshake failed: Secure connection truncated [URL]. Although I don't think there's anything specific to Regina about this svn problem, as I mentioned, I can "svn up" from home, or from my other office computer.

View 9 Replies View Related

OpenSUSE :: Error: Connection To Server Failed - (version 11.0)

May 12, 2009

I have just upgraded my openSUSE installation from 11.0 to 11.1 which everything is working great. Kudos to the development team and all those involved! I really like 11.1. One problem I have encountered is I cannot get clusterssh working. It appears to install just fine but whenever I try to execute like I did in 11.0 I get the following error: Connection to server failed -- (version 11.0) No protocol specified at /usr/local/bin/cssh line 1883

I tried to find a version for 11.1, rpm version that is, but no luck. I even download the source from SourceForge and still nada, same error. Not sure what is going on and looking for some assistance cause I really need clusterssh or another means to connect to several other machines to conduct changes.

View 9 Replies View Related

Server :: Amanda - Selfcheck Request Failed: Recv Error: Connection Reset By Peer

Feb 22, 2011

when i ran amcheck DailySet1 as backup user and got these messages:

[Code]....

View 3 Replies View Related

Hardware :: Error - Saving Connection Failed 0 Can't Write Connection Type 'cdma'

May 21, 2011

I got an error while working with NetworkManager in new RHEL6/ Fedora14. I have a ZTE AC 2726 3G wireless modem. i had tried to connect it via NetworkManager . It only requires username and password to connect but the thing is that after putting all the credentials i had checked the option" available to all the user "and while i was trying to save the profile it shows the following error saving connection failed 0 can't write connection type 'cdma'I had google so many times around this error but no better solution is there .

View 1 Replies View Related

Ubuntu Servers :: Getting Server Machine To Connect To A VPN Providing A Secure Connection

Jun 24, 2010

I currently run Win 7 and want to upgrade my computer to a server to accomplish the following... I have a VPN Service. I want the server machine to connect to a VPN providing a secure connection. Then, I want all the machines in the house (windows based) to connect through the server onto the VPN connection. Hopefully this makes sense. Would it be better to stick to Windows Server 2008 or switch to Ubuntu?

View 5 Replies View Related

Server :: Vsftpd Not Working: Connection Attempt Failed With "ECONNREFUSED - Connection Refused?

Apr 28, 2010

vsftpd not working on my CentOS system. I tried logging in using FileZilla but the error message was: Connection attempt failed with "ECONNREFUSED - Connection refused by server".

View 7 Replies View Related

Server :: Skipping Failed Dependencies Error / Rpm -u /packages Recieve A Failed Dependencies Error?

Nov 2, 2010

I am currently trying to upgrade over 100 rpms on multiple Red Hat servers. Whenever I try to do a rpm -u /packages/*.rpm i recieve a failed dependencies error on the very first rpm. I know that I can go though each rpm one by one and trace each dependency but that will take forever. Is there a way to skip these errors? I know the -nodeps command for rpm but I dont want to screw something up but running all of these rpms on -nodeps

View 10 Replies View Related

OpenSUSE Install :: Can't Update Any More - Error Connection Failed

May 7, 2011

I can't update anymore since a few days :

Download (curl) error for [URL]...
Error code: Connection failed
Error message: Failed to connect to 2a01:e0c:1:1598::1: Network is unreachable

I read somewhere that I should deactivate IPv6, which I did with no success. It seems to happen since I upgraded gnome following this link : Archive:GNOME 2.30 - openSUSE My Internet connection is of course alive and working.

View 9 Replies View Related

OpenSUSE Network :: VPN Connection - Authentication Failed Error

Nov 14, 2009

I'm extremely new to SuSE Linux. I wanted to move away from Windows and so I decided to reload my Desktop with SuSE linux.I have had no trouble until now. I'm trying to connect to my work VPN connection. From my laptop (which unfortunately is Vista) I'm able to connect without any issues. However, when I tried out the KVPN application on my SuSE linux, it just doesn't work. I get the error:
Authentification has failed.
As a side note, when I type ping google, the packets are received 100% but when I ping my company address, no packets are received. Hope this info is useful.

View 9 Replies View Related

OpenSUSE Network :: Error Message - VPN Connection Failed

Jun 19, 2010

(I'm probably going to have my forum account revoked due to excessive usage ) I'm setting a VPN connection on openSUSE 11.2. Using the networking icon on the tray I add a PPTP connection, set it up but I receive a message 'VPN connection failed'. Googling it up I tried changing a setting called 'refuse-eap' to 'yes' but it doesn't seem to work. Here's the result from the log file:

[code]...

View 1 Replies View Related

Software :: Red5 - Connection Failed Or Closed Error Message

Apr 29, 2010

Firstly I am new to red5 and not very strong when it comes to linux. I have had installed red5 on my dedicated server and going by the http://myIP:5080/installer demos it is all working fine. My problem is I cannot get it to work with my software being flashchat. I am not sure if it comes from me using the incorrect RTMP url and if so after trying about 20 or more ways of typing it in I always get the same error message "Connection Failed' or "Connection Closed" not to sure what is meant by Closed as to whether it's working but can't get in or what ever. I am after someone who can get this to work for me please and I am willing to pay for that service once it is working.

View 2 Replies View Related

OpenSUSE Install :: KPackageKit HTTP_PROXY Error On Update 11.4 - Connection Failed

Mar 11, 2011

I am having an issue with KPackageKit, actually 2 issues but one makes it unusable. The major issue is that when I go to apply the updates I get the following error message (at least here are the details of the message)

Code:

Download (curl) error for 'http://download.nvidia.com/opensuse/11.4/repodata/repomd.xml':
Error code: Connection failed
Error message: Couldn't resolve proxy 'HTTP_PROXY'

I do not run my connection through a proxy and my internet works correctly. This is on a laptop I upgraded using zypper from 11.3 to 11.4 (I did the same with a desktop which does not have this issue). zypper refresh successfully refreshes the repositories, and the various Yast repo tools all work correctly. Additionally after I am shown the updates and am prompted for root pw, the packages will no longer show up for a while, each time it tries to look for updates the message comes through but they will show up after a while again. The other issue I have is that it requests my pw multiple times, this also happens on my desktop that actually will update. I get prompted twice, they are immediate and back to back. This one is a little minor annoyance but there should be no reason that it needs to make this request multiple times.

View 9 Replies View Related

OpenSUSE Network :: Error On Updating / Installing Software - Connection Failed

Oct 21, 2010

I had this issue with Fedora Core 13, so I switched my laptop back to OpenSuse and continued to have the problem. I can do a host lookup for software.opensuse.com and I get a correct response ...
Code:
linux-edxs:/etc # host software.opensuse.org
software.opensuse.org has address 195.135.221.150
linux-edxs:/etc # host download.opensuse.org
download.opensuse.org has address 195.135.221.134

Firefox works. Thunderbird finds my mail servers just fine. SSH works. But then when I try to do anything involving software updates or installation, I get ...
Code:
linux-edxs:/etc # zypper update
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata []
Download (curl) error for '[URL]':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'

I've seen others here post queries about this, and I'll tell you what it was in my case: our DSL modem's DHCP server returns its own IPV4 address as the DNS server. When I looked at /etc/resolve.conf, I saw "nameserver: 192.168.50.254" on the last line -- the IPV4 address of our DSL modem. I manually inserted "nameserver" lines for our ISP's two actual DNS servers, and everything magically started working. Why this should confuse some software under Linux, but not other software, is a mystery. It also seems to be Gnome-specific (I didn't have this problem with OpenSuse 11.3 and KDE 4).

Ask if they're using Gnome, and ask them to check resolve.conf. A lot of DSL modems and home/small office routers return their own IP address (i.e., the same as the gateway address) for the DNS server on a DHCP query. The solution is to manually edit resolve.conf and put in your ISP's DNS server addresses manually. Incidentally, just my opinion, but Network Manager needs to make this an option. Under Windows, for example, you can select "automatically assign DNS" or you can enter them manually, even if you're using DHCP. It'd be nice if Network Manager permitted that.

View 6 Replies View Related

Fedora :: Movie Player Error Message - Pa_stream_writable_size() Failed: Connection Terminated

Jun 5, 2010

I ran Movie Player to play .mov file, but it generate the following error message:

pa_stream_writable_size() failed: Connection terminated

The .mov file is wide screen, I am not sure if that's why the error occurred. By the way, the .mov file is several hundred megabytes and store on DVD.

View 5 Replies View Related

Fedora Networking :: Establishing A Vpn Connection Using Vpnc / Error Failed To Bind To 0.0.0.0:500: Address Already In Use?

Nov 24, 2010

I am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).

As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message

Quote:

Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0

If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.

If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.

Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.

Does anybody have an idea how to enforce that the vpn connection is actually used?

View 2 Replies View Related

Ubuntu Multimedia :: Video Playback In 10.04 - Error: Pa_stream_writable_size() Failed: Connection Terminated

May 22, 2010

I recently installed 10.04 LTS. I am now having problems with video playback. When I watch an .avi file in media player, it will play for a few minutes and then come up with an error: pa_stream_writable_size() failed: Connection terminated

When I play them in vlc and kaffine they will play briefly then the sound will cut out. KMPlayer just stops without an error message.

View 4 Replies View Related

Ubuntu Servers :: SSH Error: Read From Socket Failed: Connection Reset By Peer?

Dec 8, 2010

figure out this error?

Code:
kradalby@hpcompaq6530b-laptop ~/.ssh $ ssh -vvv -p 110 kradalby@dfekt.no
OpenSSH_5.5p1 Debian-5+b1, OpenSSL 0.9.8o 01 Jun 2010

[code]....

View 3 Replies View Related

General :: Amanda Backup Error - Selfcheck Request Failed Connection Refused

Jun 15, 2010

I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get:
WARNING: greetings.com: selfcheck request failed: Connection refused

View 2 Replies View Related

Debian Multimedia :: Connection Failed To Server

Jan 26, 2016

I'm working on getting a Debian box up and running for training labs for Cisco, and would like VNC access to this Debian box. My main laptop is a MacBook Pro, and I have a Windows 10 desktop.What the problem is: Using the MBP's built-in VNC viewer, I receive a "Connection failed to "Server" Make sure Screen Sharing or Remote Management is enabled on the remote computer. using Chicken (of the VNC), I receive a "The server refused the connection".I'm using tightVNC as a server on the debian box. This is a fresh install of Debian.URL...

View 8 Replies View Related

General :: Cannot Get Mail - Connection To Server Failed

Apr 29, 2011

My Phone keeps reporting
Cannot Get Mail
The connection to the server failed
My phone does seem to show (all?) the contents of my home directory so must have received some data but no actual mail.

In debug.txt, this keeps repeating over and over:
Found 0 message changes
Initializing message diff engine
1 messages in state

And in /var/log/maillog, this does:
Killed (lost mailbox lock)
There are no other imap connections running.

View 12 Replies View Related

Server :: Install Symantec Endpoint - Error: Unpacking Of Archive Failed On File - Cpio: Mkdir Failed - No Such File Or Directory

Nov 23, 2010

i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory

View 3 Replies View Related

OpenSUSE Install :: Unable To Upgrade To 11.4: Can't Resolve Host / Error Code: Connection Failed?

Apr 1, 2011

I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):

Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'

With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!

Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).

View 9 Replies View Related

Ubuntu Installation :: Error - Failed To Download Package Files Check Your Internet Connection

Jul 31, 2011

I just installed Ubuntu 11.04 but "whenever i try to download or install any software from 'Ubuntu software Center'it gives error: "Failed to download Package Files Check your internet Connection" Internet is working fine!I've also tried the command: "sudo apt-get update"

View 2 Replies View Related

Debian :: Server IP - Remote Desktop Connection Failed

Jun 14, 2011

I want to connect to my Linux debian server, via Remote desktop connection, but when I give IP of my server and click connect, it fail, it says can't connect to the remote computer and below 3 reason.

View 3 Replies View Related

Server :: Rndc - Connect Failed - 127.0.0.1#953 - Connection Refused

Apr 27, 2009

Im having some problem with my DNS. We are using a Linux web server as one of our web server which runs some live websites.When I trying to get the status of the DNS (NAMED) it comes the following error :

The same error appears when Im trying to apply any changes on zone level for a selected doamin in WEBMIN. (Basically can't apply changes)

WEBMIN > Servers > BIND DNS servers > click a selected-domain.co.uk > Apply changes

NDC command failed : rndc: connect failed: 127.0.0.1#953: connection refused

But the server seems to be running without effecting any probelms to the sites or users. I have been searching weeks for this problem & couldn't find a solution. And also Please note that Im bit new to Linux.

Server details :

Red Hat 4.1.1-1

View 15 Replies View Related

Server :: 522 SSL Connection Failed - Session Reuse Required

Jan 21, 2009

I have a problem with vsftpd (latest version available, 2.1.0pre3) SSL. I've configured it to a nonstandard port, 65440, disabled connect_from_port_20 and run it as a normal user, from home directory. I can't use the SSL feature, every time I connect, it only reaches the login process. After logging in, I get the following error (when data transfer would start for LIST command):

522 SSL connection failed; session reuse required
My vsftpd.conf looks like this

Code:
local_enable=NO
write_enable=YES
secure_email_list_enable=YES
email_password_file=/home/stringz/vsftpd/logins

# local_umask=022
dirmessage_enable=NO
vsftpd_log_file=/dev/null
xferlog_file=/dev/null
xferlog_enable=NO

connect_from_port_20=NO
idle_session_timeout=3600
data_connection_timeout=120
run_as_launching_user=YES

anonymous_enable=YES
anon_mkdir_write_enable=YES
anon_other_write_enable=YES
anon_upload_enable=YES
anon_world_readable_only=NO

async_abor_enable=YES
ascii_upload_enable=YES
ascii_download_enable=YES
ftpd_banner=Welcome!

# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# chroot_list_enable=YES
# (default follows)
# chroot_list_file=/etc/vsftpd.chroot_list

ls_recurse_enable=NO
listen=YES
listen_address=<myipaddress>
listen_port=65440
listen_ipv6=NO

pasv_enable=YES
pasv_min_port=65441
pasv_max_port=65480
# chroot_local_user=YES

ssl_enable=YES
allow_anon_ssl=YES
force_local_data_ssl=NO
force_local_logins_ssl=YES
ssl_tlsv1=YES
ssl_sslv2=NO
ssl_sslv3=NO
rsa_cert_file=/home/stringz/vsftpd/vsftpd.pem

The client side is a Total Commander 7.02, there hasn't been any problem with its SSL yet and this only occurs when trying to connect to my vsftpd.

View 8 Replies View Related

CentOS 5 :: Outlook Express - Connection To Server Has Failed

Jul 30, 2010

I have set up a mail server and SASL and have it all working. I can send and receive mail though squirrel mail, receive from outlook, but cannot send from outlook. I am using this guide [URL]. I was even able to authenticate perfectly fine like they do be telneting to the server from root as they did. (Step 5). Now a little later in that step when they hook it up to outlook express is the problem. That doesn't work for me.

I get this error in outlook
The connection to the server has failed.
Subject 'test'
Server: 'mail.myserver.com'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: SMTP
Port: 25
Secure(SSL): No
Socket Error: 10060

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved