SUSE / Novell :: 11.2 - WiFi Network Settings On HP2133
May 21, 2010
I have just carried out a complete installation on my HP 2133 mini notebook. It was preloaded with suse 10.1 and the first time I connected it to my BT HomeHub2 was with the network icon on my home screen. Since switching to suse 11.2 when I click the same icon all I get is a setup screen with what seems like millions of setup fields that I do not understand? I have never worked with linux before so do not want to guess the settings. I have looked at google search for the answer but every page seems to be for computer programmers or I am just being dull. I can connect the ethernet cable and it works fine, but I cannot even find a network.
View 5 Replies
ADVERTISEMENT
Dec 5, 2010
I added the Nvidia Repo, installed the 260 driver, but I noticed the temp is like 83c. How can I change the fan settings to 60% like it is under windows? Opensuse 11.3 x64 KDE
View 1 Replies
View Related
May 14, 2010
I was using an nVidia graphics card... but now that its damaged, i am using the on board intel graphics card.
My linux installation was working well with the nVidia card, so how do i reconfigure my system to make it work on the intel onboard card??
I am running openSUSE 11.2...
View 4 Replies
View Related
May 24, 2010
When I installed opensuse 11.2 on my notebook i found my broadcomm 4312 wlan card in the hardware list, but it's not working. I probed different ways to solve the problem.
I found these methods: [url]
I tested them all.
I'm afraid this is not enough, because the wlan led is not lighting. Every extra button works well such as volume buttons, but the wlan button does not working, so i can't switch on the wlan.
View 1 Replies
View Related
Jun 23, 2010
Need to install Novell SUSE Linux version 11 from Different computer DVD ROM over Network.
View 1 Replies
View Related
Aug 5, 2010
Complete n00b here. I am running openSUSE 11.3 and trying to load drivers for a network card. When I try to make install, I am getting this error:
Code:
Makefile:69: *** Linux kernel source not found in any of these locations:
Makefile:70:
Makefile:71: *** Install the appropriate kernel development package, e.g.
Makefile:72: *** kernel-devel, for building kernel modules and try again.
How do I install the kernel-devel?
View 4 Replies
View Related
Mar 9, 2010
In openSuse I can connect to a wireless network. It says that it is connected, and I can open the router page (http://192.168.1.1/basic.html). But I cannot load any other pages. Nothing else recognizes internet either; I tried using konqueror, YAST and wget with the command line, and none of them could load anything. It is not a router problem or a wireless card problem because both Ubuntu and Kubuntu can connect, from the same computer. I know this is odd because in the only other thread I could find with this issue, it was a different distro and installing openSuse seemed to fix it.
Hardware:
Computer: Yakumo Notebook model 331
Network Card: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
View 5 Replies
View Related
Mar 2, 2010
I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
View 7 Replies
View Related
Apr 26, 2010
I am unable to find any documentation on the purpose of the unique setting. Does anyone have a clue what it does and how I assign my secondary interface one?
BOOTPROTO='none'
BROADCAST=''
IPADDR=''
[code]....
View 1 Replies
View Related
Jul 20, 2010
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
View 4 Replies
View Related
Nov 18, 2010
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies
View Related
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Sep 8, 2010
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies
View Related
Jan 15, 2010
I'm remotely connecting to SUSE 10 system using OpenSSH_4.2p1 from PUTTY. My problem is that my session to the server was getting disconnected after some time. when i'm giving "exit" command, it is giving the message "server unexpectedly closednetworkconnection".Also it is showing my last login wrongly. what went wrong from sshd side i dont know
View 7 Replies
View Related
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
View Related
Nov 4, 2010
I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies
View Related
Aug 23, 2010
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
View 2 Replies
View Related
Nov 4, 2015
I got this message when I tried to get in WifiSettings.
"The system network services are not compatible with this version"
What should I do?
View 1 Replies
View Related
Feb 1, 2010
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
View 3 Replies
View Related
Oct 13, 2010
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies
View Related
Jul 19, 2010
New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies
View Related
Aug 28, 2011
I've been in doubt weather to install Linux open SUSE or Mint on my Dell inspiron 1501 laptop. Having tried the latest SUSE live CD (not finding a way to use WiFi) I decided to install Mint (Katya release). Now it turns out there's a bug on Ubuntu/debian related linux distros in connection with Dell Laptops, specifically on WiFi cards by Broadcom. (If you want to know more, check this Ubuntu forum thread and my comment on it.) My question is: are there any known bugs on Dell with OpenSUSE? An additional question would be: is it at all possible to use WiFi with the latest SUSE live CD?
View 4 Replies
View Related
Feb 4, 2010
The software use to work well here, but now I got this when I try to run it
sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory
But I can not find it.
I also tried
cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0
but this does not work neither.
View 4 Replies
View Related
Oct 25, 2010
I have been searching for 2 days and cannot find an answer. Apparently Sax2 isn't available in 11.3. It looks as if many are having the same difficulty. I've tried xrandr and tried to edit /etc/X11/Xorg.conf with no success.Copying a working xorg conf file might be a fix, I don't know.
View 8 Replies
View Related
Oct 4, 2010
I use Termlite from SCO as my terminal emulator. It works on SUSe 9.3 but i can not get it working on 11.3. How do I enable the networking for this in SUSE 11.3.
View 1 Replies
View Related
Nov 19, 2010
to get flash 10 working. I just decided to update to 11.3. Bought a 8.0GB USB stick to copy files to. USB DISK icon on visible on Desktop. mounted on /media/USB DISK Clicking on device properties it is read only. I can change permissions but that is only temporary. Looking under my computer it is formated as vfat device name is /dev/sdb
I can't copy any files to it. Can't see in terminal even being root as well. Almost started the Partitioner in Yast but didn't want to accidently crash the system. That WOULD be my luck Can't find a way to format it via GUI interface. Can I use something like fdisk in terminal. I guess I need to format it as ext3.
View 7 Replies
View Related
Feb 18, 2010
I have SuSE 11 box. I notice that there's an entry in /etc/services that shows windream running on port 534. Can someone tell what is windream? I tried to google but it keeps bring up German website or something.
View 1 Replies
View Related
Jan 9, 2009
I accidently removed bottom panel of suse 11.1.Please be so kind to help me to get it back my bottom panel.
View 6 Replies
View Related
May 17, 2010
I am trying to connect to my network. I am dual-booting with windows 7 ultimate and that connects just fine. When I plug in my ethernet cable to the LAN adapter of the motherboard nothing happens. In the network manager it doesn't even acknowledge something has been connected (ie no eth0 or anything). I'm guessing that I don'tave a driver for it installed under linux. The adapter is the Marvell Yukon 8059 (88E8059 I think)
View 5 Replies
View Related
Feb 14, 2010
I am using kde and can't get rid of a gnome patch. Problem won't go away in updater applet tray or yast online update.
View 2 Replies
View Related
