SUSE / Novell :: 1-Click Install ATI Driver For ATI X1950 Video Card Corrupts - 11.1
May 23, 2009
I have installed Open Suse 11.1 on two different machines. One contains an ATI X850 video card, and the other contains an ATI X1950 video card. I updated the ATI drivers on the 850 card and it works like a dream. I updated the ATI drivers on the 1950 card and Suse becomes unusable. System works fine before the update. Before the update I ran it at a resolution of 1280 x 1024. I thought I would lower it to 1024 x 768 to see if that would help, but it does not. I dual boot with WinXP, and card works fine with that setup at 1280 x 1024, so I would suspect this is a specific problem with my Suse setup as opposed to a Motherboard issue.
View 4 Replies
ADVERTISEMENT
May 24, 2010
I want to attach disk with Suse 11.2 to another motherboard with Integrated ATI Radeon HD 4290 GPU ( at the moment I am using Nvidia GeForce 6800). How can I change settings for new video chip?
View 4 Replies
View Related
Jun 24, 2009
I have a fresh install of suse 11.0 and there is no 3d acceleration available. If I use the suse repository, which driver do I need to enable 3d accesleration? The video is integrated on the motherboard. The box is an hp pavilion a1130n and amd 3500+ processor. I installed the same suse 11.0 on a dell box with an ati 128 rage and 3d was enabled after the install.
View 2 Replies
View Related
Aug 10, 2010
I just did an install from opensuse 11.0 to 11.3 using the live web install. After the install, I found that the monitor always reverts to 87hz refresh rate and must be manually adjusted to 60hz. Also, there is no adjustment for the monitor resolution beyond 1024 x 768. I can not find the video card info in yast like it was before. Do I need to add the ati sources in yast? Will that give me a way to adjust the video card properties? Video card is the ati rage. Box is a dell optiplex pentium 3.
View 1 Replies
View Related
Feb 9, 2011
I'm trying to install a GeForce 8600 XT card into novell Open Enterprise SUSE 11 so that I can get the 3D Cube to work. It currently does not work with the default nvidia card onthe motherboard.I can not find the correct driver for the GeForce 8600XT card. Can someone identify the driver I should be using please? Then if someone could also direct me to the "How to install a Video Driver" tutorial,
UPDATE:I've downloaded the correct drivers but it still says that my hardware does not support Desktop enhancements etc ... I think the GeForce 8600 XT just doesn't support 3D accelleration ... period.Can someone suggest a reasonably priced video card that is easy to install and which supports 3D Accelleration please?
View 1 Replies
View Related
Aug 16, 2011
i've tried both the gnome and kde installers and initially it boots fine to the first menu, but if i then select 'installation' or even try to boot to the live cd, the screen goes blank and then reappears as something that looks like the static on your television if you're trying to tune it in. if you let it continue to boot, then it goes blank again and comes back with a different corrupted screen, but this time you have a white block in the middle that is apparently the mouse point as i can then move it around.
i've tried it in VESA mode and even text mode and the same thing happens. the installation media checks out fine, and my graphics card is brand new - a Radeon 3650 HD. I might try an older version of suse and try and upgrade from there
View 3 Replies
View Related
Jun 26, 2010
The hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
View 1 Replies
View Related
Aug 5, 2010
Complete n00b here. I am running openSUSE 11.3 and trying to load drivers for a network card. When I try to make install, I am getting this error:
Code:
Makefile:69: *** Linux kernel source not found in any of these locations:
Makefile:70:
Makefile:71: *** Install the appropriate kernel development package, e.g.
Makefile:72: *** kernel-devel, for building kernel modules and try again.
How do I install the kernel-devel?
View 4 Replies
View Related
May 14, 2010
I was using an nVidia graphics card... but now that its damaged, i am using the on board intel graphics card.
My linux installation was working well with the nVidia card, so how do i reconfigure my system to make it work on the intel onboard card??
I am running openSUSE 11.2...
View 4 Replies
View Related
Jul 20, 2010
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
View 4 Replies
View Related
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
View Related
Aug 23, 2010
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
View 2 Replies
View Related
Aug 8, 2009
I have installed SLES 10 SP2 but my network card is undetected. Model: Intel(R) 82567V-2 Gigabit Network I have the drivers for linux on my installation cd as:
- e1000-8.0.2.1.tar.gz
- e1000e-0.3.3.3.tar.gz
- igb-1.2.24.tar.gz
How do i install these drivers on linux?
View 4 Replies
View Related
Feb 12, 2010
I am running openSuse 11.1 64 bit on my hp pavilion dv6458se; and am unable to get my Broadcom wireless card to work.
i tried reading a few forums, but they all start when 'lspci' recognizes the card.
My problem is that 'lspci' does not show any 'Broadcom' card.
I have given below the output of 'lspci' for your reference.
View 4 Replies
View Related
Feb 10, 2010
All the three files I downloaded can not been played by Banshee. I got the message like below when I use search the code, so I installed all the Gstreamer I can find.
* Windows Media decoder (GStreamer, 32 bit, i586)
* Advanced Streaming Format (ASF) demuxer (GStreamer, 32 bit, i586)
During that I also did some update, but the problem still the same.
View 6 Replies
View Related
Feb 1, 2010
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
View 3 Replies
View Related
Mar 21, 2010
I'm a new user of fedora12 and I'm a beginer in Linux, I'll apreciate if someone tell me how to install a driver for my video card (nvidia 9400GT) because when I try desktop effect fedora disply an error "require hardware 3D support" and that tell's me I don't have the appropriate driver.
View 7 Replies
View Related
Apr 13, 2010
I am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
View 2 Replies
View Related
Jan 31, 2010
I think to change my video card.But i was asking myself, it is not good idea first to install the driver and then change the video card?What is your opinion
View 6 Replies
View Related
Feb 18, 2016
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
View 7 Replies
View Related
Jan 31, 2010
I think to change my video card. But i was asking myself, it is not good idea first to install the driver and then change the video card?
What is your opinion?
View 6 Replies
View Related
Jul 16, 2010
I am setting up Fedora 13 on a Dell optiplex 755 with the following video hardware installed:
/sbin/lspci -nn | grep 'VGA|NV'
03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [FireMV 2200 PCI] [1002:5965] (rev 01)
How can I find/install the right driver for this video card?
View 12 Replies
View Related
Feb 19, 2010
I am try to install the nvidia 96.43.16 driver for a Gforce 2 MX-400 video card following this [URL].. When I ran the 'rpm -e --nodeps xorg-x11-Mesa-libGL' command the the package wasn't installed.
When I ran modprobe nvidia it wasn't found either.
Being a newbe I had no idea what to do next.
View 1 Replies
View Related
Oct 18, 2010
I used commands below to install the driver,but when i executed the last command,it always outputted "no adapter detected",why? video cards ATI HD5650 was indeed insert correctly.Then i restart.unfortunately,i can't come into system.the screen was always flickering.I can't do anything but reinstall Ubuntu.Who can tell me why? thanks (my Ubuntu was installed in VMware workstation)here is commands i used:1.sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++6 dkms libqtgui4
2.sh *.run --buildpkg
3.sudo dpkg -i *.deb
4.sudo apt-get -f install
5.sudo aticonfig --initial -f
View 1 Replies
View Related
Oct 16, 2010
I'm a freshman of Ubuntu OS.I want to know where to download the video card's driver of ATI HD5650 and how to install it in a way as easy as possible
View 3 Replies
View Related
Sep 2, 2010
I have recently installed 11.3 onto a computer I just dropped a new mobo/cpu/memory into. At first everything worked great! (minus a few video streaming issues...but that is for a later date) Then, a few days ago, I let it do an update. Boy to I feel stupid now. I guess if it ain't broke..... So, now I don't have sound in the browsers or for the video players...such as xine. I do however still have sound with Amarok and system sounds when it boots up.
I have deleted the sound device in Yast and let it re-install several times. I tried different setting there as well. Checked and rechecked then checked again the mixer settings. Made sure my group settings included audio...just in case. Now Amarok and the online video play at warp speed, and only Amarok gives me sound....garbled...but sound. The system keeps telling me when I reboot that "one or more sound devices were removed" and wants to know if I want it to ignore them from now on. I've answered yes and no several times.I've also tried updated the alsa drivers in the software management of Yast. Can someone please help me before my wife gets mad at me for converting this computer to Linux?
Here is some information.
Password:
The "Warp Speed" for the video and audio was resolved after removing and then re-installing the audio driver and a quick reboot. But for some reason I had to reboot yet again to get the internet connection working again. This has happened to me a couple of times now. Also, when I try to adjust the Pulseaudio config under "other"in the audio config of Yast,it says it is not installed. When I try to install, it has a conflict with another program.
View 1 Replies
View Related
Sep 7, 2014
I use a debian testing, I can't drive graphics card，open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
View 5 Replies
View Related
Jun 14, 2010
I'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
View 4 Replies
View Related
Oct 31, 2010
We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.
We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:
We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.
View 4 Replies
View Related
Jun 18, 2010
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
View 3 Replies
View Related
