SUSE / Novell :: No Sound For Most Things After Recent Update & Warp Speed For Video And Audio
Sep 2, 2010
I have recently installed 11.3 onto a computer I just dropped a new mobo/cpu/memory into. At first everything worked great! (minus a few video streaming issues...but that is for a later date) Then, a few days ago, I let it do an update. Boy to I feel stupid now. I guess if it ain't broke..... So, now I don't have sound in the browsers or for the video players...such as xine. I do however still have sound with Amarok and system sounds when it boots up.
I have deleted the sound device in Yast and let it re-install several times. I tried different setting there as well. Checked and rechecked then checked again the mixer settings. Made sure my group settings included audio...just in case. Now Amarok and the online video play at warp speed, and only Amarok gives me sound....garbled...but sound. The system keeps telling me when I reboot that "one or more sound devices were removed" and wants to know if I want it to ignore them from now on. I've answered yes and no several times.I've also tried updated the alsa drivers in the software management of Yast. Can someone please help me before my wife gets mad at me for converting this computer to Linux?
Here is some information.
Password:
The "Warp Speed" for the video and audio was resolved after removing and then re-installing the audio driver and a quick reboot. But for some reason I had to reboot yet again to get the internet connection working again. This has happened to me a couple of times now. Also, when I try to adjust the Pulseaudio config under "other"in the audio config of Yast,it says it is not installed. When I try to install, it has a conflict with another program.
View 1 Replies
ADVERTISEMENT
Aug 8, 2011
After recent upgrade which contained the newer kernel ( 2.6.35-30-generic). I've started to experience problems with sound and video in programs - deadbeef and totem. Both of them dont play any sounds and video in totem is skipping every 3-4 seconds (the same applies to flash videos in browser).
As I run deadbeef from the command line I dont get any significant information. I run ubuntu 10.10 amd 64. I tried to reinstal gstreamer my programs and codecs with no luck.
View 4 Replies
View Related
Jul 23, 2011
Ubuntu 64bit. The sound system works and plays noises correctly when I test the speakers in sound preferances. The internet BBCi player(Radio) plays sound correctly. Banshee & Rhythmbox try to play music files at double, or more, speed with no sound output. Spotify Linux version also tries to playback at double speed with no sound output. Media Player attempts to play music files at high speed. Media player plays the Video and audio tracks at high speed. VLC Will play the video at normal speed but with no audio.
View 1 Replies
View Related
Oct 13, 2010
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies
View Related
Apr 20, 2011
I have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies
View Related
Sep 17, 2010
I have a default OpenSuse 11.3 system with KDE4 and alsa and an Asrock 4coredual Sata2 motherboard with intergrated audio. I configured audio by yast2 after installation of the system, and it was working. But: anytime I re-start the system, a message pops up after start-up, asking if I really want to remove audio device this and that, and no matter what I choose, there will be no sound.
I can only get sound again by:
- running yast2,
- deleting the audio device configured,
- adding the same device, and setting the volumes again.
It is rather time consuming to manually re-configure (remove and add) audio after each system start-up.Another issue: there is absolutely no way to configure skype to be able to use the microphone input. What I speak into the microphone it goes to the loudspeakers (connected to the front speaker output), but never to skype. The only way to get skype capture mic input is to configure the front speaker as a microphone input device is skype, in which case skype captures all sounds that go to the loudspeakers, but in this case sound is overly distorted. Sometimes muting channels other than Mic and Master in kmix does not work either.
Is there a way to get a working audio in today's developped linux distributions, especially SuSE 11.3, or that is the past, like convenient file managers and useable desktop?
View 2 Replies
View Related
May 24, 2010
I want to attach disk with Suse 11.2 to another motherboard with Integrated ATI Radeon HD 4290 GPU ( at the moment I am using Nvidia GeForce 6800). How can I change settings for new video chip?
View 4 Replies
View Related
Feb 3, 2009
I have been using openSuse 10.3 on my laptop since 6 months now. Only last week i came to know about this bootable kde suse : http://news.opensuse.org/2009/01/09/...-opensuse-111/
When i was done succesfully booting from the usb stick, and came back to my good old suse10.3 on my laptop, i found out that the system sound has suddenly stopped working. My sound is coming with my usb stick, but not with my native os.
View 5 Replies
View Related
Feb 10, 2010
All the three files I downloaded can not been played by Banshee. I got the message like below when I use search the code, so I installed all the Gstreamer I can find.
* Windows Media decoder (GStreamer, 32 bit, i586)
* Advanced Streaming Format (ASF) demuxer (GStreamer, 32 bit, i586)
During that I also did some update, but the problem still the same.
View 6 Replies
View Related
Jun 24, 2009
I have a fresh install of suse 11.0 and there is no 3d acceleration available. If I use the suse repository, which driver do I need to enable 3d accesleration? The video is integrated on the motherboard. The box is an hp pavilion a1130n and amd 3500+ processor. I installed the same suse 11.0 on a dell box with an ati 128 rage and 3d was enabled after the install.
View 2 Replies
View Related
May 10, 2009
I lost my entire Operating system and am now reinstalling. After installing SUSE 11.1 and updating it through the update icon in the status bar, I ended up with a complete update except for the update icon in the status bar now depicting a downward arrow. This equates to my not wanting to download a update/patch/whatever of a "Microsoft font file"!
However, there is no way to delete this option that I do not want. How do I get rid of the MS font update and bring the OS/system back to the Gecko symbol associated with taking care (updating) of updating my system without a thing from MS? To those who are bound to ask, I want nothing to do with MS, this should be sufficient.
View 2 Replies
View Related
Sep 8, 2010
for the past 2 month or so i've been constantly annoyed by my yast automatic updater to install a regress patch to send firefox back to 3.5.11...which i've been ignoring for a long time because to be honest i'm convinced that those suse developers have pretty much lost the plot recently , instead i've sticked to the latest stable releases of firefox that is 3.6.8 (btw today 3.6.9 has been released and i'm about to upgrade firefox to that...today)
anyways , my suspecion has been confirmed when another update poped up that said it's gonna update firefox from 3.5.11 to 3.6.8 (which is what i have now)so the question: HOW does the updater track which updates have been installed and which haven't? and how can i remove all or ignore firefox related updates ?
View 3 Replies
View Related
May 23, 2009
I have installed Open Suse 11.1 on two different machines. One contains an ATI X850 video card, and the other contains an ATI X1950 video card. I updated the ATI drivers on the 850 card and it works like a dream. I updated the ATI drivers on the 1950 card and Suse becomes unusable. System works fine before the update. Before the update I ran it at a resolution of 1280 x 1024. I thought I would lower it to 1024 x 768 to see if that would help, but it does not. I dual boot with WinXP, and card works fine with that setup at 1280 x 1024, so I would suspect this is a specific problem with my Suse setup as opposed to a Motherboard issue.
View 4 Replies
View Related
Aug 10, 2010
I just did an install from opensuse 11.0 to 11.3 using the live web install. After the install, I found that the monitor always reverts to 87hz refresh rate and must be manually adjusted to 60hz. Also, there is no adjustment for the monitor resolution beyond 1024 x 768. I can not find the video card info in yast like it was before. Do I need to add the ati sources in yast? Will that give me a way to adjust the video card properties? Video card is the ati rage. Box is a dell optiplex pentium 3.
View 1 Replies
View Related
Feb 4, 2010
Everything went wrong no sound, no scsi to scanner, printers, and kde only using failsafe. So, did a new install and still probskde stops half way through saying it there is no file in /lib/modules/2.6.31-5-0.1-desktop
Fixed prob by creating a copy of 2.6.31-8.0-desktop
kde only starts with x11failsafe
On failsafe boot (from GRUB) load of messages daying can not find disks then mess Doing Fastboot
At least I've got sound though printer still a prob
Any ideas how to fix the kde start up?
config
ASUS M4A78-E, AMD xenon III 550, 4GB mem
SUSE 11.2 standard KDE, network install
View 4 Replies
View Related
May 29, 2010
I have had no sound on my thinkpad x40 for a week now, first with f12 and now with f13. Under f12 I had sound until about 5/26/2010. I first noticed I had lost sound after some updates around that date. After not being able to solve the problem, I upgraded to f13, but still no sound.
pulsesound seems to be working. If I run pavucontrol and go to the playback tab, and then run paplay /usr/share/sounds/k3b_success1.wav from a console, it registers on the pavucontrol tab, but I hear nothing. kmix shows nothing muted. alsamixer shows nothing muted. pavucontrol shows nothing muted.
View 7 Replies
View Related
Aug 20, 2010
Today, I installed the recent kernel security update (i.e. 2.6.32-24-generic #41-Ubuntu SMP). After a reboot, the sound is gone.
From my user account:
mpc@awd:~$ alsamixer
cannot open mixer: No such file or directory
Same problem with "aumix".
However, the commands "sudo alsamixer" and "sudo aumix" seem to work (but still no sound).
"lsmod | grep snd" will give
snd_hda_codec_atihdmi 2367 1
snd_hda_codec_realtek 203310 1
snd_hda_intel 21941 0
[Code]....
View 6 Replies
View Related
Jun 26, 2010
The hard drive is accessed every few seconds with OpenSUSE and when it is there is a click sound when it is first accessed. I have other distros which dont make the clicking sound when they access the hard drive. I need to prevent opensuse from making the click sound when it does whatever it's doing. Im not even sure what it's doing or what settings to change, and most importantly how do i make it not click? Maybe i could copy settings over from another distro if i knew which settings to replace.
View 1 Replies
View Related
Jan 17, 2010
I am a new user of opensuse 11.1. I want to know about audio/video player that support all kind of format and also a dvd player ...
View 1 Replies
View Related
May 10, 2010
When I (try) to upload files to Ubuntu One; generally, the upload doesn't happen. What does happen is [on] the bottom panel says: "Sending request to files.one.ubuntu.com . . ." It may sit there like that for hours without an upload happening. Once, I left my computer on and left for a couple of days; when I got back it had uploaded. Is this the norm? Is there something wrong on my end (other than PBKAC)? What can I do to speed things up? Or can they be speeded up? Is the description of Ubuntu One one thing and the reality something else?
What to do?
View 2 Replies
View Related
Jul 20, 2010
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
View 4 Replies
View Related
Nov 18, 2010
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies
View Related
Jul 5, 2009
OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
View 2 Replies
View Related
Sep 8, 2010
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies
View Related
Sep 16, 2010
how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies
View Related
Nov 4, 2010
I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies
View Related
Aug 23, 2010
I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
View 2 Replies
View Related
May 20, 2011
For a while now, even before upgrading to 11.04, after booting everything was working so so slow for few minutes.
I'm turning on my computer and wait, its not like I'm starting opening programs or anything.
It takes 10-15 seconds to the terminal to open up, and for another 15-20 seconds its totally blank and I can't do anything. When it does finally opens, starting XAMPP takes too long.
It wasn't like that when I bought the laptop few months ago, everything was snappy and responsive.
The only software that starts on startup is Gnome-Do, besides it the list if full of some services..
So, to my questions:Is there any software that can investigate this slowness?
What can I do to speed things up?
View 3 Replies
View Related
Feb 4, 2010
I seem to be having some audio clashes. I use Exaile to play music (if that matters), and after I play music, no sound comes out of videos (not just Ubuntu, it won't work from Yahoo or MSN videos either). Then when I try to go back to playing my music on Exaile, no sound will come out of that. Likewise, if I restart the computer... the sound works again. If I instead watch a video first, there will be sound -- but as soon as I try to play music from Exaile, nothing comes out.
View 6 Replies
View Related
Feb 1, 2010
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
View 3 Replies
View Related
