I'm a new user of fedora12 and I'm a beginer in Linux, I'll apreciate if someone tell me how to install a driver for my video card (nvidia 9400GT) because when I try desktop effect fedora disply an error "require hardware 3D support" and that tell's me I don't have the appropriate driver.
View 7 RepliesI am setting up Fedora 13 on a Dell optiplex 755 with the following video hardware installed:
/sbin/lspci -nn | grep 'VGA|NV'
03:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [FireMV 2200 PCI] [1002:5965] (rev 01)
How can I find/install the right driver for this video card?
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
I'm trying to install an ati video card driver, but can't seem to get past this (see screenie)
When I click okay, I expected a prompt to put in my password, but everything just closes.
I am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
View 2 Replies View RelatedI think to change my video card.But i was asking myself, it is not good idea first to install the driver and then change the video card?What is your opinion
View 6 Replies View RelatedI have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
I think to change my video card. But i was asking myself, it is not good idea first to install the driver and then change the video card?
What is your opinion?
I am try to install the nvidia 96.43.16 driver for a Gforce 2 MX-400 video card following this [URL].. When I ran the 'rpm -e --nodeps xorg-x11-Mesa-libGL' command the the package wasn't installed.
When I ran modprobe nvidia it wasn't found either.
Being a newbe I had no idea what to do next.
I used commands below to install the driver,but when i executed the last command,it always outputted "no adapter detected",why? video cards ATI HD5650 was indeed insert correctly.Then i restart.unfortunately,i can't come into system.the screen was always flickering.I can't do anything but reinstall Ubuntu.Who can tell me why? thanks (my Ubuntu was installed in VMware workstation)here is commands i used:1.sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++6 dkms libqtgui4
2.sh *.run --buildpkg
3.sudo dpkg -i *.deb
4.sudo apt-get -f install
5.sudo aticonfig --initial -f
I'm a freshman of Ubuntu OS.I want to know where to download the video card's driver of ATI HD5650 and how to install it in a way as easy as possible
View 3 Replies View RelatedI use a debian testing, I can't drive graphics card，open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
View 5 Replies View RelatedI'm trying to install the driver for my ATI Radeon X1600 Series video card. I got the driver from the ATI site. Heres the link: [URL]... I'm using 10.04 LTS. I have attached a screenshot of the message I get when I run the installer.
View 4 Replies View RelatedI have installed Open Suse 11.1 on two different machines. One contains an ATI X850 video card, and the other contains an ATI X1950 video card. I updated the ATI drivers on the 850 card and it works like a dream. I updated the ATI drivers on the 1950 card and Suse becomes unusable. System works fine before the update. Before the update I ran it at a resolution of 1280 x 1024. I thought I would lower it to 1024 x 768 to see if that would help, but it does not. I dual boot with WinXP, and card works fine with that setup at 1280 x 1024, so I would suspect this is a specific problem with my Suse setup as opposed to a Motherboard issue.
View 4 Replies View Relatedi just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies View RelatedIf I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies View RelatedI just installed Linux Mint 9 as a dual boot install with Win XP. Trying to activate wireless network card driver and video driver. Pops up: "You are not authorized to perform this action".How do I get authorized?
Now every time I boot Win XP, the Internet Explorer menu bar is all blacked out and goofy. If I log out and back in it corrects itself. If I reboot it's blacked out again. Re-installed IE8. Still blacks out.Also Firefox in Win XP crashes expectantly. It has NEVER crashed on me previously.
I'm having some trouble on the search for the correct driver to my video card, an Intel Chipset. In the HP site, I can only find the driver in the windows format, and I can't find any other proper linux file on the Intel or Nvidia webpages, althougth I know they provide it. how to download the correct file?
The properties from my video card and the webpages I said are below.
Code:
HP Drivers: http://h10025.www1.hp.com/ewfrf/wc/s...roduct=3979340
My computer is a Hp Pavillion Dv4-1465dx.
how do you install an nVidia video driver?
View 1 Replies View RelatedThe nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
View 6 Replies View RelatedI was using F11 when my Nvidia 6500 broke. I got a 9400GT but now F11 won't work.When I try the default option: after the media test, the mouse cursor appears and then nothing happens.If I try the second option "using generic video drive" anaconda crashes after I choose my keyboard layout.The Live CD and preupgrade didn't work either.F10 installs perfectly.
View 1 Replies View RelatedI have geforce fx 5200 and i downloaded the 32 bit and 62 bit for the video card driver update and i dont know how to use them and they and they come in scripts !
View 3 Replies View RelatedI've recently had a new Video Card installed in my Ubuntu machine. (the old card failed)...
SYSTEM >> ADMIN >> HARDWARE DRIVERS - says my video card is active / running.
- The Installation guy - Didn't install the drivers (the CD was for a WINDOWS machine)
1) The driver may be installed & running - However - How do I know / test that it is the *RIGHT* driver for the new video card installed ?
2) How do i tell / find out the brand name of the physical card ?
(the CD disk says SAPPHIRE / ATI Radeon)
I am making a switch over to Ubuntu from windows on one of my kids machines.It has a Nvidia video card, a g-force fx 440 i believe, or something like that.Anyway I just loaded up Ubuntu 10.10 and and it seems it does not recognize my video card. If i go tosystem>administration>Additional drivers, the dialog comes back with "No proprietary drivers are used on this system. Ok so now I go to Ubuntu Software center and search nvidia..... I get the option to installl Nvidia binary x.org driver (version 185), I do so
Now in the Additional drivers dialogue it tells me "this driver is active and currently in use". Awsome, Now when I click on Nvidia X Server settings under system>Administration I get the following dialogue."You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."If i do what that last message said, run sudo nvidia-xconfig in the terminal, It gives an error saying the xconfig file is not there, and it will create one. The next time I reboot Ubunut just shows a black dos like screen asking for username and password. If i put it in, it does nothing, I end up having to re-install ubuntu.
There is running gOS on my computer (Ubuntu baset OS) and I want to install the Video Card driver for ATI RADEON 9250.
Ifound the driver in the official site =>> http://ati.amd.com/support/drivers/l...n-prer200.html
And I also saw the instructions of installation =>> [url]
But I cant instal the driver. When I write the comand sh ./ati-driver-installer-8.28.8.run (of course the file is in the home directory)the terminal window writes:
PHP Code:
And then written in the instruction: The ATI Proprietary Linux Driver Setup dialog box is displayed but no window or dialog box is displayd.
The display card of my notebook is ATI rd 6370m ,the OS is fedora14. After I installed the driver download from ATI web site, it says that my computer can only run 2D can't run 3D. I want to know if some one used the same card with me in fedora14 has run 3D sussesfully? After the installlation I run "#aticonfig" it says "can't find the adaper".
View 2 Replies View RelatedI just purchased an Acer Aspire V5-123 notebook with AMD processor and graphic and installed Debian 7.6 (stable) on it. first of all, I had to install a newer (3.14.0.bpo.1-amd64) kernel image to get the ethernet card working. Then, I got problem with Xorg not starting.
Here is the error lines from /var/log/Xorg.0.log:
Code: Select all(EE) VESA(0): V_BIOS address 0x0 out of range
...
(EE) Screen(s) found, but none have a usable configuration.
and this is the output by issuing lspci:
Code: Select alllspci -nn | grep VGA:
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Device [1002:9834]
I installed the libgl1-mesa-dri, xserver-xorg-video-ati, and firmware-linux-nonfree packages, as suggested by AtiHowTo from Debian Wiki, but the problem still persists and the last one (firmware-linux-nonfree) actually caused the notebook to freeze on boot. so, I removed it.
a powermac G4 with radeon 9000 RV250 in ubuntu 10.04 ppc i just want the graphic work better
View 9 Replies View RelatedIs it possible to make a live CD which will contain a video card driver that can be used by the PC it is running on?
View 2 Replies View RelatedI would like to use Nouveau rather than NVidia proprietary drivers. I am very experienced with Linux but a bit clueless with monitors. I got rather close to a working setup, but just can't get the resolution and maybe H/V sync frequency of my monitor correct.
My system:
OpenSUSE 11.4 32-bit
Gforce 7300
KDE desktop
Acer 21" LCD monitor, non-wide screen, it can do 1600x1200
X configuration: No x.org.conf file, and only one modified file in xorg.conf.d, namely to specify the driver "nouveau" (by the way, is that even needed??) According to lsmod, nouveau loads perfectly. However, KDE starts-up in an odd, non-useful screen resolution. 3d works, slowly, which is OK. I specifically want 1024x768 resolution, but am not able to specify a different resolution in the Display configuration section of the KDE control center (I understand that is perhaps normal).
I tried inserting text into the xorg.conf.d/50-monitor, not really knowing what to add or where and eventually got 1024x768 but the display was unstable, blinking off and on every so-often, and the screen edges were off.I am pretty sure I simply need to put information about my monitor and desired resolution into some file(s) in xorg.conf.d/ or maybe build a dreaded xorg.conf file. I know of the "cvt" utility, and I have a hunch this is part of the solution.