Red Hat :: Scientific Linux Install DVD Fails To Boot / No Matter What Options Are Passed
Feb 18, 2010
I hope I'm posting in the right forum for this (since Scientific Linux is based on RHEL)...I downloaded the Scientific Linux 5.4 "Boron" Install DVD's, and I can't get the DVD to boot. It gets to the point where it tries to initialize SMP (I have a Core 2 Quad Q8200 processor), and it just crashes and reboots my computer. I've tried disabling ACPI, APIC and APM using the noacpi, no apic, and apm=off options, one at a time, and all 3 at once (since the problem seems to be with APIC, because it fails to initialize on all 4 of the processor cores)...does anyone know what I'm doing wrong here, or how I can fix this? I really want to run Scientific Linux, but I can't since it crashes.
View 7 Replies
ADVERTISEMENT
Aug 9, 2011
Until some time ago I had a dual Windows 7 and Fedora operating system, then I completely moved to Fedora. Recently I have become interested in Scientific Linux and wanted to install it besides my Fedora. I took a back up of all my data and formatted my HDD for a clean install of both of them. This is what I did:
First I installed Scientific Linux with these partitions (contents of /etc/fstab):
[Code]...
Then I went on to install Fedora 15; I kept the same primary and extended partitions but only changed the names of "/FedoraRoot" to "/" and "/" to "/SLRoot" in the above list while installing Fedora. I also chose the boot directory of Fedora to be /dev/sda1/ which I wanted to be the /boot file for both systems while I had chosen the boot file for Scientific Linux to be "/dev/sda".
Everything went well until the final step of copying the files an error came that some of files that Fedora wanted to install in /usr/share, /usr/lib64, /usr/bin, /etc/system..., /etc/issue..., /etc/redhat-release... and /etc/rpm are already present in the Scientific Linux format and so there is a conflict and it has to terminate!!! I must have made some strange mistakes in the definitions
View 2 Replies
View Related
Apr 19, 2010
i am installing Ubuntu version 9.10 in VMWare Work Station 7 but i can't get passed to 'Install Ubuntu'. I tried pressing enter but it still won't load.
Is there any key or command that i have to enter?
View 2 Replies
View Related
Mar 19, 2010
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies
View Related
Dec 4, 2009
I use Suse Linux 11.1 on a VMware Workstation 6.5.3, and I've run into the following strange behavior: occasionally (happened two-three times in the last several days), I get instead of the usual boot options screen, which is of green color, a screen with the same content but which is predominantly blue; in fact it contains a sort of snowscape with a penguin walking across it. So far I haven't noticed anything wrong with my machine; but I'm curious if anybody else has noticed it. Could it be some malware
View 2 Replies
View Related
Jul 21, 2010
Previous installation (11.1) left boot manager intact and I had three options on menu. Windoze, OS/2 and Opensuse. They all worked and if I selected Opensuse I then got a Grub boot screen with normal options from which I could start opensuse as usual.
New installation of 11.3 I selected MBR option but think I must have left grub as the boot method. I now boot into the grub screen but if I select OS/2 there is only Windoze left on menu and no OS/2.
What should I use to put back the booting to how it was? Can I use opensuse program to do it or should I use OS/2 partition manager?
View 1 Replies
View Related
Mar 20, 2011
I am trying to install a dual boot.
I was unable to make any progress until I tried the f6 options.
Is there a list of what the f6 mean.
I am trying to install 10.10, dual boot with xp pro
View 1 Replies
View Related
Mar 10, 2011
Everything went fine but whenever I rebooted, Ubuntu 10.10 was not an option in the boot list. However, Windows shows up and boots just fine. I am currently tri booting (not sure if that's the correct term) Windows 7, Ubuntu 10.10, and OpenSuse each on a hard drive of their own. In the dolphin file manager I can still see all the files for Ubuntu so I know it was not partitioned over or deleted.
View 7 Replies
View Related
Feb 11, 2010
how to install xmgrace and qtiplot for scientific plotting.
View 4 Replies
View Related
Mar 11, 2010
how to properly install Suse Linux 11 64 bit on my laptop (with AMD Turion x2 x64). Currently I have Windows XP Professional x64 as operating system and I will prepare a new partition for the Linux installation. Should I take care of something before/during the installation, or it will install itself and will setup automaticaly the dual-boot configuration? I am also thinking of installing BackTrack Linux for dual boot with xp x64, would there be some differencies by the installation?
View 4 Replies
View Related
Jun 27, 2011
I forgot root password. I read that I have to access boot options during start up. I have two choices "desktop", "failsafe". There is boot options below but I cannot access it.
View 5 Replies
View Related
Nov 1, 2010
I am new to Linux. When I installed some applications and something through package manager,Now I get two added options in boot loader with identical names like failsafe and normal. what is that?multiple kernel?
View 3 Replies
View Related
Mar 11, 2011
I bought a new NVidia Asus EN210 for my HTPC, but I can't get Ubuntu to install.
First I made a live USB disk of 10.10 with Unetbootin and when I choose the option of "try Ubuntu" it starts loading and then just hangs, still showing the menu of boot options. After this I tried Xubuntu on a USB disk. This one also starts loading but then just fails. I also tried XBMC Live. This one does show the Ubuntu 10.04 screen but then just shows a black screen.
After this I found a CD with Ubuntu 10.04, I think or it is 10.10, laying around in my room. I booted it and once I select an option from the install menu it starts to load, but then just gives a black screen with a flashing "-" sign.
The strange thing is, once I pop in the old video card, which is an ATI HD4350, my Ubuntu 10.10 Live CD on USB disk does work and it does get past the menu of boot options (in my second paragraph I describe how this isn't the case with Ubuntu 10.10 combined with my NVidia card).
View 3 Replies
View Related
May 20, 2010
I have Vista on my Samsung R60 + and have installed Ubuntu. On start up I get the dual boot option, select Ubuntu which then goes to completeing install etc, get some HD activity then nothing.
View 1 Replies
View Related
May 1, 2011
Recently I installed Ubuntu 10.10 on a desktop I use on occasion. It is a Dell Dimension E510. It was running on Windows XP(?) and I think ours dates back to around 2005 or 2007, but I can't say so with certainty.
Anyway, let's say it was about ten days ago when I installed. Everything worked fine and was great. But now the computer won't boot and I'm at a total loss of where I should go from here.
To summarize what happens: Basically I hit the power button and can hear the machine turn on (the monitor's power button is stuck on, so it's already powered), but the screen just stays dark.
I've done a slight amount of research and tested to see if it was the CPU behind it, and if removing any external devices would help (which I'm still not sure if it isn't the culprit) to no avail. My younger sister uses the computer almost exclusively for charging her iPod - which in that case may be related. I'm curious if anyone knows other methods to get around the possibility of it being a CPU problem just in case.
View 1 Replies
View Related
Nov 14, 2015
I was planning on installing Stretch on my iBook G4. So I got my netinst cd and went through the install process. Everything was fine till I got to the section where I selected my mirrors. I chose the US/ftp.debian.org mirror and it failed so I tried the ftp.kernel.org and that failed as well. Then I tried the third on the list and I was able to connect and get my packages. The install completed, however when I rebooted the bootup froze. So I thought that it could my cd so I went and grabbed the latest stretch iso from the site.
Yet again I ran into issues. The biggest was that I kept getting sent back to install menu to manually select what steps I wanted to do. I found this odd since normally the install will just walk you through. Then I ran into the same issues with mirrors. finally the install completed and I was rebooted. However the boot failed again, but this I got dropped into the initramfs shell. Should I file this as bug with the debain-installer package?
View 8 Replies
View Related
Jul 24, 2009
I have sevral older machines that cannot boot from usb. Until now I have installed fedora using the provided boot.iso on a CD and an external USB dvd drive with the full install DVD.
With Fedora 11, this fails. It gets as far as "finding storage devices" and fails, telling me that an unhandled exception has occured. It offers to save the details, but freezes looking for a suitable location. I have no such problems with the same DVD/external rw drive on systems that can boot directly from usb.
View 2 Replies
View Related
Oct 17, 2010
I just fresh installed openSuse 11.3. Am trying to install Hupervisor and Tools but during the install I get the message that xen itself can't be installed while it needs 20MB space.My boot partition is already maxed. At least that is what the partitioner is telling me that 70MB is the maximum setting.
View 2 Replies
View Related
Jul 21, 2010
I was running openSUSE 11.2 on a Dell Studio with a mirrored disk. The upgrade to 11.3 went well it seemed until it got to the point of installing the new bootloader. Then it couldn't mount /boot. Otherwise it seemed to go OK though.It completed and rebooted. I see a very brief flash of the word GRUB on the reboot, but then the screen blanks and I get the BIOS messages again.How can I now install GRUB so that I can boot. I had a similar issue with 11.2 in the past, and was able to repair GRUB using 11.2's DVD's "Repair Installation" which had tools to reinstall GRUB.11.3's DVD is missing this option.I'd prefer not to do a fresh install as then I will have a lot of OS setup to repeat (Samba, Apache, Trac, etc.....)
View 9 Replies
View Related
Sep 13, 2010
Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.
Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.
Longer version:
I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.
View 2 Replies
View Related
Jun 17, 2011
I had to install grub manually after the install. GRUB loads fine and I can select the Ubuntu option, but it simply stays on a purple screen with no HDD activity. When I go into recovery, it falls to a busybox command-line and says "ALERT! /dev/disk/by-uuid/(string of letters and numbers) does not exist". I use a RAID array which causes me loads of problems, but I'm fairly sure, from what I've read of similar problems, that this is due to the update it did during installation. I suppose I could try installing it without internet connection, but then presumably the same thing would happen as soon as I ran update-manager? I have actually tried the reinstall several times as well as reinstalling GRUB.
View 1 Replies
View Related
Mar 10, 2010
I've just installed debian to a thumb drive on a system with no hard drives. I did not install any hard drive to avoid confusion. The installation went well, I rebooted the system several times with no issues until I decided to install the hard drive (SATA drive). After I installed the hard drive the system failed to boot showing something like:
Code:
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
Loading, please wait...
mount: mounting /dev/sda1 on /root failed: No such device
(continues for other partitions and mount points)
Target filesystem doesn't have /sbin/init
No init found. Try passing init=bootarg
BusyBox v1.10.2 (Debian 1:1.10.2-2) built-in shell (ash)
/bin/sh: can't access tty; job control turned off
(initramfs) [9.670347] sd 0:0:0:0: [sdb] Assuming drive cache: write through [9.673805] sd 0:0:0:0: [sdb] Assuming drive cache: write through
(some insignificant text was not copied :P)
I am guessing that the new disk is somehow confusing debian regarding where to look for system files or the address where the devices are located because if I remove the data cable from the hard drive the system reboots correctly (no hard drive though). Hotpluging the drive works but once I reboot it happens again.
View 6 Replies
View Related
Mar 25, 2011
I'm using OpenSUSE 11.4, trying to install to an iSCSI partition. I'm using gPXE to boot to my iSCSI volume. This works fine, and pulls up grub with my boot options. I think boot the openSUSE 11.4 entry, which kicks off the boot process. I see the steps for running DHCP on the interface, but when it gets to iscsiadm, there's an error logging in to the iSCSI target portal along the lines of "15 - already exists. After that things start to fall apart - I/O errors, mainly, and the system completely fails to boot. What's going on and what this already exists message means?
View 8 Replies
View Related
Feb 26, 2010
I'm using the RAID1 setup, which is configured in the BIOS, as it is a HP Proliant server. i have 2 500GB hard drives configured in a mirror. when booting the install, it recognises this, and deals with it fine.
The problem is, when it gets to the section of installing the grub2 boot loader, it just stops and gives me the "ubuntu installer main menu" where if i select grub boot loader install it just loops back, and if i select LILO installer, it errors, saying an installation step failed.
It has the option to skip installing boot loader, but then, can i get it to boot a different way? can i boot manually into the server install and then install GRUB and hope it works? can i install grub1 rather than grub2?
View 5 Replies
View Related
Dec 27, 2010
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem?
View 9 Replies
View Related
Jun 4, 2011
I recently purchased a new Lenovo Thinkpad T420i and am having problems installing the latest version of Squeeze from CD. After receiving the laptop, I started it up, configured Windows 7, and confirmed everything is working correctly. Next I went through the Debian installer, which completed successfully. I'll be dual-booting Windows 7 and Debian, so at the partitioning stage I resized my NTFS partition, added a shared VFAT partition, then used the "Guided" install to create my root and swap partitions. My partition layout is code...
I assumed something was wrong with grub, so I booted the CD into rescue mode and chose to reinstall grub onto the Master Boot Record. But nothing changed. Just to experiment, I went into fdisk, deleted all my new partitions (leaving just the Windows ones), and tried rebooting, but the same error happened. I then went through the Debian installer again, being careful to set everything up correctly, but still, the device won't boot.
I'm not even getting to the grub boot screen, so something is wrong even before the point. Reinstalling grub to the Master Boot Record (grub-install /dev/sda) isn't changing anything. How can I troubleshoot this?
View 8 Replies
View Related
Aug 11, 2010
I am attempting a Network installation of openSuse 11.3 on an old desktop which has IBM Boot Manager so that I can boot to one of three OSs, openSuse being the third. Sadly the installation of openSuse fails before the CD initial boot has finished. Looking at the text log of the starting process the problem appears to be a driver and the last line of text where it stalls refers to eata driver.
There are 4 hard drives in the machine, configured as two RAID 1 arrays driven by a DPT 2144W hardware raid card. (Very old but very good). If I Google eata I get a good deal on SCSI raid and DPT cards but I am out of my depth when they say a kernel module is needed.
Another concern is that the RAID arrays are configured using a bootable DOS configuration disk and once this is done they are recognized by other OSs such as eCS and OS/2. The arrays are just treated as single drives so these OS installations do not interfere with the card configuration. I am concerned because I cannot afford to lose the data on the drives but it appears the linux driver might want to rebuild the arrays.
View 3 Replies
View Related
Jan 24, 2010
When I ran the distribution upgrade from 9.04 in update manager, my screen went blank on reboot and will not recover. Every time I reboot, screen goes blank. I cannot press CTRL-ALT F1 - F6 to gain access to text shells.
I tested booting from the 9.04 live CD and it works fine. So I downloaded the 9.10 live cd on another computer and booted it on the disabled system. Same exact problem on the live CD that I had upon installation: on boot screen goes black and cannot access text shells.
What can I do next to get out of this short of going back to 9.04, which has problems that I do not want to live with?
View 1 Replies
View Related
May 26, 2011
I'm trying to install (L)ubuntu on an old AMD 1.66GHz based HP laptop, to dual boot with Windows XP. However I'm running into an issue that I haven't come across on any other machine before where after selecting "Install Lubuntu" from the main boot menu, it moves to the scrolling dots splash/loading screen and after ~30 sec or a minute it freezes. There is no error, it doesn't reboot or eject the disk even after several hours of sitting on that splash screen, with the dots frozen, no CD activity, and no HDD activity. I get the same result if I try to boot it as a LiveCD as well.
Can someone help diagnose whats going on? Is it possible changing some boot options will allow it to install? I'm not quite sure where to go with this one.
View 5 Replies
View Related
Jul 13, 2011
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
View 3 Replies
View Related
