Ubuntu Installation :: 9.10 Video Fails On Boot - Install - Upgrade And Live CD
Jan 24, 2010
When I ran the distribution upgrade from 9.04 in update manager, my screen went blank on reboot and will not recover. Every time I reboot, screen goes blank. I cannot press CTRL-ALT F1 - F6 to gain access to text shells.
I tested booting from the 9.04 live CD and it works fine. So I downloaded the 9.10 live cd on another computer and booted it on the disabled system. Same exact problem on the live CD that I had upon installation: on boot screen goes black and cannot access text shells.
What can I do next to get out of this short of going back to 9.04, which has problems that I do not want to live with?
View 1 Replies
ADVERTISEMENT
Mar 10, 2011
The 11.4 KDE live CD 64 bit and 32 bit fails at run level 5. The ATI card is a Radeon HD 6000 series. Screen is 1080P.
View 4 Replies
View Related
May 5, 2010
I created a Ubuntu live usb，it works fine on my notebook, but boots fail on my desktop pc. I found that /dev/sdb1 is always mounted to /cdrom when booting, but usb key is /dev/sdc on my desktop pc, it causes sequence booting process which depend upon files under /cdrom fails.
View 2 Replies
View Related
May 1, 2010
Installed v9 a couple of weeks back and have been causally mucking about with it since. I managed to get XP and ubuntu running as a dual boot system (which was an achievement ).
Anyway, i've upgraded to 10.04 - and already loving it. However... my XP o/s no longer boots. It use to prior to the upgrade. Now, when the XP o/s is selected from GRUB2, I just get a series of bleeps and a flashing _.
Now, I am a complete novice. I actually have no idea where to even begin trouble shooting GRUB2 (and i'm assuming its a problem with GRUB).
View 6 Replies
View Related
Jun 10, 2010
Dual boot Windows XP SP3 & Ubuntu 9.10 on a single hdd, w/2 partitions. Booted to Ubuntu and upgraded online. XP boots fine, but Ubuntu, not so much; a msg about /dev not found, followed by a shell login prompt. I suspect a grub problem, but haven't been able to find a definitive answer. Since I can at least boot XP, I do not want to do anything that would screw that up and leave me with no bootable OS. I did the "upgrade" shortly after 10.04 was released. Is there a way to reliably fix this w/o possibly screwing up my ability to boot XP, the only OS I can boot? I have no Ubuntu 10.04 disk, as I used their upgrade online option.
View 1 Replies
View Related
Aug 1, 2011
I just upgraded to ubuntu 11.04 but now all the kernels fail to boot. The resolution of grub changed and the older kernels are put into a 'previous kernels' folder. The most recent kernel halts at the message '* Stopping userspace bootsplash [ OK ]' and the previous kernels fail with the message 'Unlink after no-irq. Controller is probably using the wrong IRQ',
or show the background of the login screen with just a white box.
I think the cause is that I have an ATI graphics card (HD Radeon 3650), because on my 2 other computers ubuntu upgrades fine and they have NVIDEA graphics cards.
As a last resort I tried installing different distro's like Linux Mint but it also gived me the 'unlink after no-irq' message.
View 1 Replies
View Related
May 13, 2010
I previously managed to install Ubuntu 9.04 using the regular Live-CD by using the no-ahci option. Now I am trying to install Ubuntu 10.4 LTS with an alternate install CD but even tho when i use the same options, I get a black screen then everything messes up and I get this: This is a video of what happens: [URL]
So I downloaded the regular installation CD and I had a big surprise again...The same thing happens except that its not white but purple. No matter which option I select its still the same. Note that this did the same thing when I tried to install Ubuntu 9.04 with the Alternate CD. I have a SiS motherboard. I tried OpenSuse just for the fun of it and it works!!! But the things is I don't like OpenSuse I would really like to make it work with Ubuntu.
View 4 Replies
View Related
Jul 21, 2010
I was running openSUSE 11.2 on a Dell Studio with a mirrored disk. The upgrade to 11.3 went well it seemed until it got to the point of installing the new bootloader. Then it couldn't mount /boot. Otherwise it seemed to go OK though.It completed and rebooted. I see a very brief flash of the word GRUB on the reboot, but then the screen blanks and I get the BIOS messages again.How can I now install GRUB so that I can boot. I had a similar issue with 11.2 in the past, and was able to repair GRUB using 11.2's DVD's "Repair Installation" which had tools to reinstall GRUB.11.3's DVD is missing this option.I'd prefer not to do a fresh install as then I will have a lot of OS setup to repeat (Samba, Apache, Trac, etc.....)
View 9 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Feb 21, 2011
Yesterday my wife was using our laptop and an upgrade manager dialogue box came up. She clicked yes to install upgrades, but at some point during this process the machine froze. She restarted, and I haven't been able to successfully boot since then. the final screen when trying to boot from the hard drive reads:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init=bootarg.
[Code]...
I'm slowly getting the hang of Ubuntu. By now I know enough that a Live CD can fix most problems. So that's where I went after doing several searches about the error messages that were appearing. The menu screen works, but I can't get it to boot into the "Try ubuntu" mode. I tried changing the boot parameters to no avail. As the boot tries to load I can see a line by line report of errors- some are I/O errors and are in white, but many were in red, which seems bad from my mostly ignorant perspective. I saw lots of SQUASHFS errors among other things. I took a snapshot of the screen that was displayed when the boot failed- it's attached to this post (lots and lots of text to be typed otherwise). The reason I know it failed is because I've tried a half dozen times with the same exact result- once I let it sit for an hour+ just to make sure it was really frozen (a bit optimistic).
Relevant info: Ubuntu is running on a Dell Inspiron 8600 laptop. I think it's version 9, but could be 10. The Live CD I'm using is version 10 burned 1/4/2011. I'd be thrilled to hear any suggestions that folks might have.
View 3 Replies
View Related
May 12, 2010
I run "aptitude update;aptitude full-upgrade" today, then I updated /etc/default/grub changing only the default boot line number, and I dully run update-grub, with no error messages. Now Kubuntu will not boot. The new kernel 2.6.32-22 is in the boot menu. When I turn the computer on, a blinking cursor appears on top line, column 8, and after a few seconds this cursor disappears and the screen is blank - my monitor indicates no video signal.
The failsafe 2.6.32-22 grub line does not boot either. I tried pressing Ctrl-Alt-F1, Ctrl-Alt-F2 etc. up to Ctrl-Alt-F10 to get to a text mode login prompt, but the screen remains blank and my monitor indicates no video signal. The workaround is to boot to kernel 2.6.32-21. The machine is Athlon XP, 2GB RAM, ATI Radeon 9600
View 1 Replies
View Related
Dec 4, 2010
I have a 1.0 ghz G4 eMac running Tiger. Using Ubuntu 10.04's Live-CD I installed 10.04 on a 8-gig USB flash drive and it worked very well despite spending nearly five hours to download its files via DSL and a pokey USB 1.1 port. The flash drive's 10.04 installation worked just fine on my eMac and 900mhz G3 iBook except for Airport wireless non-connecting issues.(I like Ubuntu 10.04 because unlike Mint for PPC, you're not hassled or barred from accessing your Mac HD and its files.) THEN, to resolve my wireless issues, I decided to upgrade to 10.10 which took nearly 12 hours, and it seemed to've installed well until I tried booting the flash drive and it doesn't work. I get the Ubuntu icon in the Startup Disk screen but it keeps returning to it even after I select Ubuntu. The error screen I get reads code...
View 5 Replies
View Related
Apr 26, 2010
While trying to upgrade from 9.10 to 10.04, I consistently get the error:
Failed to fetch http://ca.archive.ubuntu.com/ubuntu/...e_1.34_all.deb Hash Sum mismatch
I've tried on multiple computers and on virtual box, in all cases using alt-f2 typing 'update-manager -d' and following the instructions from there. I've also tried downloading the link separately but get the same error.
Any ideas? Should I just install it from scratch?
View 1 Replies
View Related
May 23, 2010
My first upgrade attempt to 9.10 ruined my install - there was no return and as 9.10 would not install either, I reinstalled 9.04 and everything was as expected.I decided to wait for 10.04 hoping the issue had been solved - unluckily it has NOT. Neither Live CD 9.10 nor 10.04 work. New Mint does not work either - to closely related to Ubuntu, but Suse live CD does. Played around with findings from different threads - like taking out "quiet splash --" and adding modprob parameter to no avail Prime suspect is HD and HD controller (ATA/PATA) - but I could not nail it.
View 3 Replies
View Related
May 20, 2010
I have Vista on my Samsung R60 + and have installed Ubuntu. On start up I get the dual boot option, select Ubuntu which then goes to completeing install etc, get some HD activity then nothing.
View 1 Replies
View Related
Sep 13, 2010
Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.
Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.
Longer version:
I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.
View 2 Replies
View Related
Feb 20, 2010
The harddrive of an old laptop of mine recently died. Until I can replace it, I would like to use the xubuntu live-cd. However I would also like to be able to install some additional packages and change some settings, so it would be great if I could make it persistent. I know that it's possible to install to an usb-pendrive, but the problem is that the laptop isn't able to boot from usb-devices.
Is it possible to install xubuntu to usb, but boot the system wiith the live-cd? Or is there another way to use an usb-pendrive to keep some settings/packages?
View 2 Replies
View Related
Jun 25, 2010
I use Ubuntu at work on multiple machines. I have instaled one PC ok (although had a few issues with the errno5 install error. Took out some RAM, installed, put RAM back, works). Now trying to reinstall on my main PC and having some very weird issues.When I try to boot off the CD it boots, says there was a problem and takes me into the desktop session, but that session wont actually load up properly. I think its something to do with gnome messing up the activity applet etc. Sometimes I get a blank grey box in the middle that looks like a half loaded error, othertimes it actually loads and tells me 'The panel encountered a problem while loading "OAFIID:GNOME_IndicatorApplet".'
Other times it asks me if I want to delete the applet or not, but clicking doesnt seem to do anything. mouse pointer works as normal but clicking anything doesntseem to do anything, or it seems to catch up 10 minutes laterBreifly managed to get into another TTY but then that locked up too after I tried 'killall gnome-panel'.I dont think the CD is the issue as the md5 checksum is correct, and my colleagues pc is on 10.04 using this CD. Please help, I dont want to be stuck on 9.10 forever
View 4 Replies
View Related
Dec 27, 2010
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem?
View 9 Replies
View Related
Aug 17, 2010
I have made several live Cd's and img for my flash drive and tried to even preview Ubuntu before install, but nothing seems to be working. it makes it to the screen that says Ubuntu with the dots and the dots "cycle" then afew seconds later, weather cd or flash drive, everything just stops and my computer freezes. Tried nomodeset and everything i could find between here and google to no avail.
cant get past that load screen. Ive been lurking on the forum for days and finally got fed up enough to post this because im fresh and have no clue what im doing when it comes to this. all i know is i want something better than windows(lol) and Ubuntu seems like its right up my alley...user, my "skills" if you will, are better than most, but Linux.its like trying to reed Greek for me.Also, computer specs...Toshiba A505-S6025 4gb Memory Nvidia GeForce 310M (from what i read i will have trouble with this) Realtek RTL8191SE wlan (also will have problems with this)
EDIT: just ran live cd with virtual box and it started the demo of Ubuntu with no problem with no options(like nomodeset) checked off... apparently i think im doing something wrong when it comes to booting the other way...
View 2 Replies
View Related
Jul 24, 2009
I have sevral older machines that cannot boot from usb. Until now I have installed fedora using the provided boot.iso on a CD and an external USB dvd drive with the full install DVD.
With Fedora 11, this fails. It gets as far as "finding storage devices" and fails, telling me that an unhandled exception has occured. It offers to save the details, but freezes looking for a suitable location. I have no such problems with the same DVD/external rw drive on systems that can boot directly from usb.
View 2 Replies
View Related
Jan 12, 2009
i have a hp dv6707us with windows vista and i'm trying to install fedora 10 x86_64 from a live cd, when i try to use the live cd it shows a screen saying that it will boot after 10 seconds, then appears a black screen with a loading bar with fedora 10 word next to it when the bar becomes completely white along with the word fedora 10 it doesnt happens anything and any indication of what could be wrong then i type enter and it reads the live cd for a while then a black screen with a blinking cursor appears and yet nothing happens i wait until i get bored and cancel the all the process.
View 1 Replies
View Related
Jul 15, 2010
I used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.
I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.
The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.
How can I remove that window on boot?
I want to boot directly on desktop...that way will be perfect!
View 1 Replies
View Related
Oct 12, 2010
My live cd worked flawlessly.
After I installed it, is another story I chose to include the suggested .mp3 codec, and to install updates at the same time.
Cmos and hardware all inits fine, then I get several seconds of a cursor, followed by the nice "ubuntu" title with little orange squares under it.
Interestingly, the squares do not cycle until I hold down the power button.
Searching for "10.10 boot" somehow returned zero results. ??
View 4 Replies
View Related
Jul 13, 2011
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk
grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
View 3 Replies
View Related
Feb 28, 2009
I was able to install Fedora 10 from the Live KDE CD, however I can't boot it.
I placed it on /dev/hda4 of an IDE disk, while on /dev/hda1 I have a RedHat 9 Linux, /home is on /dev/hda2 and the swap is on /dev/hda3. I'm not sure if RedHat 9 and Fedora 10 can coexist on the same HD.
There's an option in the Live KDE CD boot install, which allows one to select:
boot from hard disk:
Do you know what to type in in order to direct Fedora to boot from /dev/hda4 (who may be /dev/sda4 as seen by Fedora)?
P.S. For the time being, I want to forget about Grub or LILO and see if I can boot it this way first. I have LILO working, it boots Windows from a separate disk and RedHat 9 from /dev/hda1.
View 3 Replies
View Related
Aug 27, 2010
I have two hard drives in my laptop, they are NOT raid configured. I installed 32-bit Ubuntu on the second HD, third partition: Sdb3. I then installed 64-bit Windows 7 on the same hard drive, first partition: Sdb1 (Sdb2 is formatted NTFSd willusedasstorage).Windows installed fine.Then I installed Windows in 32-bit on the first hard drive, first partion: Sda1. Sda2 will again be used as storage.When I boot up, Windows boot manager gives me the option of the two windows OS's to install (but not Ubuntu of course).I wanted to boot into the Live CD, where I would reinstall grub, assuming it would recognize my two Windows, and I could boot into any of the three OS's upon start-up.The Ubuntu Live CD, will act as though it is going to boot, bringing me up to the loading screen, then it cuts out to "busy box" and I am not sure what to do. Buys box is almost like a command prompt, but I don't understand the commands.
View 1 Replies
View Related
Mar 22, 2010
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /)
- /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91)
- /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
View 1 Replies
View Related
Sep 10, 2010
I'm having big problems trying to install Ubuntu 10.04 (32bit) on a new computer - nothing has ever been on it so it's fresh as a daisy. It has no optical drive so I created a live USB installation through Unetbootin, which starts up no problem and I can start the installation to the hard drive. After picking my keyboard layout in stage 3, the installer hangs. A crash message appears in the top right (but nothing overtly obvious happens and I can close the installation window easily). Trying to start GParted from the applications menu also results in the same crash error. Looking around I thought this may be some disk formatting issue so I created a new ext4 partition for the whole hard drive (160GB) with the disk utility which went without a hitch but hasn't made any difference.
I can however start GParted from the command line (gksudo gparted) into the partition created above just fine but still no dice when opening from the applications menu, it just pops up, starts to read then closes. Just to check if this was Ubuntu specific I also tried running Fedora off another USB and the same thing happens, the installer hangs when reading the hard disk. Looking around this seems like a common problem with many users finding the same issue (there's a 4 page topic about it going back 12 months)
View 5 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
