Red Hat / Fedora :: Terminal At Boot Time / Opted To Install ATI Drivers When Alerted To Restricted Ones By Pop-up?
Jan 1, 2010
I recently installed Fedora - it seems like a nice interface and I want to experience the system before deciding whether I want to keep using it over my ever reliable Crunchbang, which gives me absolutely no grief whatsoever. However, it is nice to use an attractive interface now and again.So, here's my problem - I opted to install the ATI drivers when alerted to the restricted ones by the pop-up. I took note of how to disable them again if there were problems with the display after reboot. There was a problem with the display (black screen) and I can't get the command entered at boot time because the only command line environment I have an option for is GRUB. Grib does not recognize any of the 'aticonfig --initial -f' command that ATI instructed me to use to get things back to normal. How do I do this? I prsume others have been there and will know how to guide me. - getting the graphical interface to display better graphics. I want the eye candy that desktop effects give. I am hoping Fedora won't let me down here because I could simply continue to use Ubuntu which only gives one problem with the window resize delay.
View 3 Replies
ADVERTISEMENT
Aug 9, 2011
I just reseantly got an Asus Essentio CM1730-05 desktop and I installed Ubuntu 11.04 on it with Wubi. After doing so, I installed the restricted driver for my onboard ATI Radeon 3000 graphics. After doing so I get to a blank screen right after the splash screen. Also I think it is frozen because I don't here the Log in music and I have to hard reboot instead of just hitting the power button. If you need to know more about my hardware just ask. Also I have tried two different monitors.
A Dell M991 and my HDTV. I have used the following hook ups to the HDTV-DVI to HDMI and HDMI to HDMI. The Dell M991 is like any older monitor. Just that one VGA hook up. I noticed there is an Asus section so I hope that this is still the right spot. I have tried the following. Replace quiet splash with nomodeset and also i915.modeset=1. I have yet to try i915.modeset=0.
View 4 Replies
View Related
Jun 5, 2010
I made a quick little USB install of Ubuntu using the USB Creator thing in Ubuntu 9.10 (I gave it room to store data also). I use this USB on two computers (Both Toshiba Laptops) and one of them needs restricted drivers for 3D. If I install them, will it mess up where it won't work on any other computers?
View 3 Replies
View Related
Dec 30, 2010
Just wondering how i could add a entry into a restore script i would run after doing a fresh install of #! Crunch bang. going to be using a base script from [URL]...to do the basics replacing the aptitude thing with apt-get of course What i will be using is as follows
#!/bin/bash
#
# This script is the first in a series of setup scripts for gnome
# Check for admin rights. If user is not an admin user, exit the script
if [ $UID != 0 ]
then
[Code]...
View 2 Replies
View Related
Feb 20, 2010
due to a crash on window's part my computer crashed and I decided to install the latest version of Ubuntu. (9.10) However as it happened, it was actually incompatible with the usb on my computer an Acer AM5641 desktop. So I opted for 8.10 which works like a charm except for the fact that the restricted drivers for my graphics card (an Nvidia 7900 GS that I installed) don't work. After clicking "enable driver" everything appears to go as normal. Except for the fact that when I restart it, it automatically goes into safe mode, and i can't save it at a higher resolution than 800x600.
View 1 Replies
View Related
Mar 1, 2010
I reinstalled ubuntu and now there isn't a box that pops up saying "restricted drivers" where my wireless would pop up saying something like Broadcom STA wireless driver. and Broadcom BZ3 wireless driver (or something like that) I would then click STA wireless driver and click "activate" then it would make my wireless card work.
Why isnt this box popping up? how do I get to it?
View 4 Replies
View Related
May 18, 2010
I have been using EnvyNG for my nvidia 9600 for a few ubuntu versions now, but cant find envy after doing a clean install of lucid. When I installed lucid and added the sources, Envy is not there. Does this mean envy no longer used, or is not updated for lucid?
Is my only option for OpenGl to use restricted drivers? I think the restricted drivers are causing me some grief with compiz & emerald. I frequently lose emerald, & have to reload the windows manager. I rarely saw these issues with karmic or jaunty.
View 4 Replies
View Related
Aug 10, 2010
i have always wondered , what is the package for Restricted Drivers Manager ? it used to be something like restricted-manager ,but that package is not in the repos
View 2 Replies
View Related
Jun 21, 2010
I attempted to install restricted drivers using jockey-gtk, was told to reboot and drivers would take effect. Rebooted and got no graphics, after some finagling I was able to delete xorg.conf and I now have horrific looking graphics. Defaulted to current version or 195 (which is also the only option I see in the jockey tool, however in synaptic/apt I see I can install other versions.
View 5 Replies
View Related
Oct 10, 2010
Compiz works out of the box in Live systems when run on computers with integrated Intel graphics chips.Is there a way to make it work on system with Nvidia or ATI chips? Even if I have persistence enabled, downloading and installing the drivers does not carry over to the next session and it again throws up a "restricted drivers available/needed" prompt.P.S The purpose of doing this is for demos. Plugging in a live system and letting people play with whizbang effects is the best way to convert them
View 9 Replies
View Related
Jun 11, 2010
I'd like to be able to limit access to a particular website, based on the time of day. I would also like to be able to password protect this if possible.So for instance, from 7am until 10pm daily, I can access URL... but after 10pm it redirects to 127.0.0.1 or something. And this configuration be protected by only allowing a certain user (other than root) to change the config?
View 7 Replies
View Related
Aug 26, 2010
My system hangs at boot time when loading hardware drivers for about a minute. It hangs here:
Code: dmesg
[ 8.196035] udevd version 124 started
[ 8.533233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[code]....
View 9 Replies
View Related
Jul 17, 2011
As this question pops up quite often on IRC and, as a quick search told me, on this board as well, I decided to put together some directions that, with some or the other variation, also apply to other Linux distributions and have never failed me. The following is confirmed to work for Kubuntu 11.04 Natty Narwhal 64bit with a NVIDIA GeForce GT 240 and on Kubuntu 11.04 Natty Narwhal 32bit with a NVIDIA GeForce FX 5900XT graphics card.
This HowTo will describe how to install the proprietary NVIDIA graphics card drivers using exclusively the command line. I strongly suggest you try this method for a fresh install of graphics drivers before trying any other method, especially a GUI-driven one (I never used a GUI for package management on a Debian-ish system, but I hear that the Ubuntu Software Center supposedly has a way of installing proprietary graphics drivers).
The restricted packages repository should be enabled by default. To the more experienced users: This HowTo uses apt-get for demonstrating the install process. If you prefer using aptitude, feel free to replace the commands accordingly. First steps. As well be doing everything on the command line, first open a terminal application from your desktop environments menu or from a shortcut icon on your panel, if you have one. You should be greeted by a prompt that looks like this:
[Code]...
View 7 Replies
View Related
Sep 2, 2010
My system hangs at boot time when loading hardware drivers for about a minute. dmesg
Code:
[ 11.865604] iTCO_vendor_support: vendor-support=0
[ 11.888580] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[code]....
View 3 Replies
View Related
Nov 3, 2009
how to install the drivers Checking through the linux terminal with lspci and lspci -n, I've determined that I have a BCM4312. But when I check the device manager, it says I've got a Dell wireless 1395 WLAN mini-card. Does the lspci search for only the chipset and could that be different than the actual device?
I've run through the alien guy's wiki that's been posted several times and have set up the WPA key in the wireless directory. I've also seen some people using fwcutter on here? I'm not sure what that's for or how to use it.I think I've installed ndiswrapper, but am not sure how to use it. I've also been using this guys wiki [URL] because it's specific to my device, but once I get to the final step of building the LKM with: make -C /lib/modules/`uname -r`/build M=`pwd`, nothing happens, it says it can't find the directory.
View 14 Replies
View Related
Apr 1, 2011
How do I install Drivers for logitech c100 webcam in kiwi 10.08?
I am dyslexic. Is there a command for install webcam drivers that I can copy and paste to terminal window?
View 14 Replies
View Related
Sep 25, 2009
When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies
View Related
Mar 7, 2010
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
View 16 Replies
View Related
Apr 1, 2011
Is it possible for me to use a command in terminal window to Download and Install drivers for Logitech C100 webcam. If so can I copy and paste because I`m Dsylexic.
View 7 Replies
View Related
Dec 9, 2010
Do you have to reinstall Nvidea and Broadcom drivers every time the kernel is updated? The new kernel would not even load to where I could get to my desktop. Help?? I could not even sign in with older kernels. Had to use a Puppy CD to edit my Grub menu.lst so I could sign in on the older kernel.
View 9 Replies
View Related
Dec 27, 2010
Can anyone tell me what command can be used so that the Linux Centos Server starts mysqld, httpd and ftpd services at boot time automatically?
View 2 Replies
View Related
Feb 16, 2010
How do I check what video driver I have installed in the terminal? Then how do I install or yum install it? I wanna do everything through command line soz.. I have an ATI 4850 I believe.
View 2 Replies
View Related
Mar 1, 2011
Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Mar 4, 2010
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
[URL]
View 3 Replies
View Related
Oct 9, 2010
I'm planning to migrate from ubuntu server to open suse serverI'm testing the migration in a virtual machine and I'm having problems with mdadmEvery time Open suse boots I need to run mdadm --assemble /dev/md0 and activate the volume group vgchange -ay VGNAMEDuring the boot time boot.md and mdadmd are running but (startup scripts only scan) I believe mdmad is not running because needs to be assemble every time.
View 9 Replies
View Related
Dec 26, 2010
Are there any easy special tricks to speed up the boot time?Coming from Linux Mint (GNOME), I could get to the Desktop from cold in less than 25 secs.Now in openSuse 11.3 (KDE4.5) it takes more than twice that.Is this a function of KDE or have Ubuntu done something that openSuse hasn't to speed up the boot?
View 9 Replies
View Related
Jan 15, 2011
I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code:
~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4300 Series
OpenGL version string: 3.3.10151 Compatibility Profile Context
Shows fglrx works OK, as well as overall performance is pretty good.
I've done
Code:
aticonfig --initial
radeon drivers is also blacklisted
but running (if it means something)
Code:
# depmod -a; lsmod | grep radeon
radeon 868858 0
ttm 64561 1 radeon
drm_kms_helper 32944 1 radeon
drm 221516 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 6728 1 radeon
View 4 Replies
View Related
Apr 24, 2011
Basically everything was going fine, and i was enjoying the OpenSuse experience, then downloaded djl (Games Launcher) , installed some games and found that i had a very very very bad frame rate (about 1FPS), and my GPU is a NVIDIA GTS250 (1GB), and runs most games flawlessly under m$, so i went about installing the graphics drivers for my card. I followed the instructions and was under the assumption that i installed the correct ones, but now i cannot boot into any graphical interface. I think that it should be a graphics issue, as this was one of the few things done before rebooting. I have tried booting into the normal mode, and the failsafe, I have read many other "Not booting'' posts, and have tried their solutions without success, there include: Changing the boot parameters Logging in and manually trying to boot up the gui (init 3.... init 5... etc)
When the computer tries to load up OpenSuse in normal mode, it comes up with the normal loading screen, and then about 90% of the way it stops for about 30 seconds, and then switches over to a CLI, asking for a login, going through the log a couple of things fail, did have these noted down (but cannot find and will post along with other commands that i am asked to do) I want to try and avoid a reinstall as it took me a long time to get the WiFi card working.
View 9 Replies
View Related
Aug 26, 2011
I've recently jump from the Ubuntu/Mint ship, and figured I've give a polished KDE distribution a shot. Of course I turned to OpenSuSE, and I love it so far. I've resisted KDE quite a lot since 4.x came out but it's really come along. Much better than the (in my opinion) monstrous disaster that Gnome has become.
Anyways, on to my problem: I've installed the proprietary Nvidia drivers via the one-click-install shown in the wiki, and that worked great. But now my resolution at boot - that is the boot/loading screen, not my desktop - is shown at a very low resolution instead of my native resolution, like it was with OpenSuSE's default open-source Nvidia driver, which I'm guessing is Nouveau. On Ubuntu, this was pretty easy to correct; all you had to do was edit /etc/default/grub and put your resolution there, and tinker with some other options so that instead of Plymouth trying to set its own, it just carries over Grub's specified resolution. But I can't seem to do that with OpenSuSE. For one, I don't see /etc/default/grub, and more than that, I don't think you guys use Plymouth. I could be wrong on that second point, though. So, how can I change the boot screen's resolution to my native resolution? I'm using the latest Stable release (11.4) and latest Nvidia drivers. Other than that, the install is new.
View 5 Replies
View Related
